Jump to content

News

The latest Automotive News and Updates
With the introduction of the Cullinan "high-sided vehicle", Rolls-Royce now has five models for sale - the rest are Ghost, Dawn, Wraith, and Phantom. But according to Rolls CEO Torsten Müller-Ötvös, they aren't planning to expand the lineup with a smaller SUV.
“No, definitely not. You need to go with the flow, so for that reason, I’d never say never, never, never – but we don’t currently have any plans to expand our model line-up any further," said Müller-Ötvös.
“Our strategy is definitely to maintain our high-end price position and not move the brand just for volume sake into lower-price segments.”
It seems to be working as early sales of the Cullinan have exceeded expectations.
Source: Autocar
  • Don't expect a small SUV for example

Earlier this month, Audi CEO Rupert Stadler was taken into custody by German prosecutors over concerns about evidence tampering. He is expected to be in jail for another week as investigators will conduct interviews about the diesel emission scandal. Whether or not he is released on bail remains to be seen, but sources tell Automotive News Europe that Stadler will likely not return as Audi's CEO.
"The expectation is that Stadler cannot return to his post. You have to be careful, because it's not so easy due to German labor laws, but he needs to concentrate on his legal defense right now and clearing his name," said a source close to Volkswagen Group's supervisory board.
The board has been protecting Stadler for some time, but a change in think on the board now see him as 'damaged goods'. According to sources, the last thing Audi needs is a CEO that is implicated in the diesel emission scandal returning to said position. It is hoped that when Stadler is released, he will step down as CEO. It would avoid the embarrassment of the company having to fire him.
Who could take Stadler's place? Some believe it could be Bram Schot, Audi's sales chief who was named interim CEO. Sources reveal that Schot isn't acting like a caretaker CEO. A key example was the decision to cancel the media launch of the e-tron in Brussels in August, to the U.S. on a yet to be revealed date.
"If Bram Schot does his job well, he has a chance to be the permanent successor. He has all the abilities he needs to act and Schot isn't postponing anything, he's making decisions -- de facto he's the CEO," said a source.
Source: Automotive News (Subscription Required)
  • Good-bye Stadler

It is now official, the Detroit Auto Show will not be held in January beginning in 2020. Organizers of the show made the announcement yesterday afternoon and released a teaser video showing what the show may look like in its new date, complete with outdoor test tracks and vehicle displays.
The Detroit Auto Dealers Association (DADA) will be holding a press conference on July 24th announcing the new date. As we have reported previously, DADA was considering moving the show to October not only for better weather (a complaint for a number of journalists who cover the show), but to also give it some breathing room from another show, the Consumer Electronics Show (CES) that takes place around the same time.
There is also another month possibly up for consideration, June. This is being pushed by General Motors that sees the show being reworked as "massive festival of automotive" that would be aimed at consumers - not the media. The hope is that it will draw more people to Detroit to the various venues. It should be noted that June is when the Detroit Grand Prix on Belle Isle is held, and is sponsored by Chevrolet.
Organizers are also considering a name change. A source tells The Detroit News there are twelve names under consideration, but will likely not be announced on the 24th.
Source: Automotive News (Subscription Required), The Detroit News
  • The question is which month

While we're still waiting on anything concerning the next-generation Charger, Dodge has gone ahead and made a number of changes to the current model for the 2019 model year.
We'll begin with the base SXT and work our way to the SRT Hellcat, highlighting the various changes.
SXT: All-wheel drive becomes available on the base trim, bringing with it the more powerful 3.6L Pentastar V6 (300 horsepower and 264 pound-feet). Options now include  Houndstooth cloth sport seats, Caramel Nappa leather interior, updated Blacktop Package, and new Cold Weather Package. GT: This model will now be positioned as performance-oriented model for the V6. It gets the 3.6L Pentastar V6 from the SXT AWD, but sends power to the rear-wheels. Previously, the GT was only available with AWD. Other mechanical changes include a performance suspension, 3.07 rear axle ration, and enhanced steering system. The exterior boasts a new performance hood, sculpted side sills, and a spoiler. A set of Houndstooth cloth bolstered performance seats, paddle shifters, and 8.4-inch UConnect system with Dodge Performance Pages make up the interior. R/T: Becomes more aggressive in the looks department with a new performance hood, fascial, side sills, and spoiler. Under the skin is a standard performance suspension, 2.62 rear axle ration, and enhanced steering system. Power remains the 5.7L HEMI V8 with 370 horsepower and 395 pound-feet. R/T Scat Pack: Gains Launch Assist (help minimize wheel hop and maximize grip) and Line Lock (to do those smoky burnouts). A new front grille features dual air inlets to provide additional cooling for the 392 HEMI V8 engine (485 horsepower and 475 pound-feet). A Satin Black-painted hood and Bilstein three-mode Adaptive Damping Suspension are on the options list. SRT Hellcat: Adds Launch Assist, Line Lock, After-Run Chiller (keeps cooling down the supercharger/charge air cooler when the engine is turned off), and Torque Reserve (closes a bypass valve to prefill the supercharger and manages fuel flow and spark to create a "reserve of torque that is delivered upon acceleration from a standing stop). Other changes include a new grille with dual air inlets, optional Satin Black painted hood, and Alcantara interior package.  The 2019 Charger lineup arrives at Dodge dealers in the third quarter.
Source: Dodge


Imposing New Face, Interior and New Performance Upgrades Lead Revamped Dodge Charger Performance Lineup for 2019
Dodge repositions the Charger lineup to include a new SXT all-wheel-drive (AWD) model and new Charger GT rear-wheel-drive (RWD) performance model; both are powered by the award-winning Pentastar 3.6-liter V-6 engine, which delivers up to 300 horsepower and up to 30 miles per gallon Charger GT and R/T models receive a full complement of race-bred chassis upgrades and features along with new performance looks, such as a performance hood with air induction, styled fascia, sculpted side sills, decklid spoiler and seats New for 2019, Dodge Charger SRT Hellcat and R/T Scat Pack feature standard performance upgrades, including Launch Assist and Line Lock; a new performance grille with dual air inlets; new Launch Control switch on R/T Scat Pack; and Torque Reserve, After-Run Chiller on SRT Hellcat June 28, 2018 , Auburn Hills, Mich. - Dodge//SRT continues to run at full throttle in the North American large sedan segment, revamping the entire Charger lineup for 2019. As America’s only four-door muscle car and the sales leader in the segment five years running, Dodge continues to charge ahead of its competition with upgrades both inside and out.
 
New for 2019, Dodge is repositioning the Charger lineup into six distinct, attitude-infused models that offer a range of performance and powertrain options for every modern muscle-car customer. The lineup ranges from the 707-horsepower Dodge Charger SRT Hellcat – the quickest, fastest and most powerful sedan in the world – to the efficient V-6 power of the new Charger GT RWD performance model and the all-wheel-drive capability of the new SXT AWD model.
 
“Despite a shift toward utility vehicles in the United States over the past decade, the Dodge Charger and Challenger continue to buck the trend,” said Steve Beahm, Head of Passenger Car Brands, Dodge//SRT, Chrysler and FIAT – FCA North America. “Charger and Challenger retail sales have increased 70 percent since 2008, and since the launch of Scat Pack in August 2014, high-performance model sales increased from 4 percent to more than 25 percent. Charger is on track to lead the large car segment in the United States for the fifth straight year in 2018, and we intend to keep that string alive by updating the product to deliver the performance and capability that our customers demand.”
 
Dealer orders for the 2019 Dodge Charger open in late June 2018 and vehicles are scheduled to arrive in Dodge dealerships in the third quarter of 2018.
Charger SRT Hellcat
The 2019 Charger SRT Hellcat remains the quickest, fastest and most powerful sedan in the world with the supercharged 6.2-liter HEMI® V-8 that delivers 707 horsepower and 650 lb.-ft. of torque. The engine is mated to the quick-shifting TorqueFlite eight-speed automatic transmission with steering wheel-mounted shift paddles.
 
New for 2019, the Charger SRT Hellcat features a new performance grille with dual inlets that feed cooler, outside air into the engine compartment. Bolstering the performance is the addition of four race-inspired technologies that come standard on Hellcat, including:
Launch Assist, which uses wheel speed sensors to watch for driveline-damaging wheel hop at launch and, in milliseconds, modifies the engine torque to regain full grip Line Lock, which engages the front brakes to hold the Charger SRT Hellcat stationary, but leaves the rear wheels free for a burnout to heat up and clean the rear tires After-Run Chiller, which keeps cooling the supercharger/charge air cooler after the engine is shut off Torque Reserve, which closes a bypass valve to prefill the supercharger and manages fuel flow and spark advance to balance engine rpm and torque, generates a reserve of torque that is delivered upon acceleration from a standing stop New instrument panel badging, a Satin Black painted hood option, available Brass Monkey 20-inch forged wheels and an Alcantara interior package are also new to Charger SRT Hellcat for the 2019 model year.
 
Charger R/T Scat Pack 
The 2019 Dodge Charger R/T Scat Pack is the most muscle for the dollar, powered by the naturally aspirated 392 HEMI V-8, it delivers 485 horsepower and 475 lb.-ft. of torque, mated to the TorqueFlite eight-speed automatic transmission, priced less than $40,000.
 
New for 2019, Launch Assist and Line Lock are now standard features on the R/T Scat Pack for optimum performance at launch from a standstill. A new switch on the dashboard provides quick access to initialize Launch Control, which coordinates the engine, transmission, driveline and suspension for an optimal launch and consistent straight-line acceleration.
 
R/T Scat Pack features the same new performance grille with dual air inlets as the SRT Hellcat and adds a new Scat Pack bee badge on the decklid, replacing the R/T badge. New Dark Dub Plate instrument panel and Houndstooth cloth performance seat with an added Scat Pack bee logo are also standard. Dual Carbon stripes, a Satin Black-painted hood and Bilstein three-mode Adaptive Damping Suspension are added to the available options.
 
Charger R/T 
The 2019 Dodge Charger R/T is powered by the iconic 5.7-liter HEMI V-8, rated at 370 horsepower and 395 lb.-ft. of torque and mated to the standard TorqueFlite eight-speed automatic transmission.
 
For 2019, the Charger R/T adopts new performance looks and features standard, including the performance hood, fascia, sculpted side sills, spoiler and seats. Race-bred chassis upgrades, including a standard performance suspension, 2.62 rear axle ratio, enhanced steering, steering wheel with paddle shifters, Dodge Performance Pages with the 8.4-inch Uconnect screen, Houndstooth cloth bolstered performance seats, new Dark Dub Plate instrument panel, and new 20-inch Satin Carbon and Black Noise wheel options.
 
Available on the R/T is the new Cold Weather Package, which includes heated steering wheel, heated cloth driver and passenger seats.
 
Charger SXT AWD 
The Charger SXT AWD model, new for 2019, is powered by the award-winning Pentastar V-6 engine, rated at 300 horsepower and 264 lb.-ft. of torque, and mated to the TorqueFlite eight-speed automatic transmission, delivering up to 27 mpg on the highway. The all-wheel-drive system is automatic with an active transfer case and front-axle disconnect, which helps minimize powertrain parasitic losses.
 
Available options on the SXT AWD are a new Caramel Nappa leather interior, Houndstooth cloth sport seats and the Blacktop Package, which includes a new 19-inch Black Noise wheel. The new Cold Weather Package is also available on the SXT AWD, which includes heated steering wheel and heated cloth driver and passenger seats.
 
Charger GT 
The new Dodge Charger GT RWD performance model is powered by the award-winning Pentastar V-6 engine, rated at 300 horsepower and 264 lb.-ft. of torque and mated to the TorqueFlite eight-speed automatic transmission.
 
For 2019, the GT adopts new performance looks and features standard, including performance hood, fascia, sculpted side sills, spoiler and seats. Race-bred chassis upgrades, including a standard performance suspension, 3.07 rear axle ratio, enhanced steering with paddle shifters, Dodge Performance Pages with the 8.4-inch Uconnect screen, Houndstooth cloth bolstered performance seats, new Dark Dub Plate instrument panel, and new 20-inch Satin Carbon and Black Noise wheel options.
 
The new Cold Weather Package is also available on GT, including heated steering wheel and heated cloth driver and passenger seats.
 
Charger SXT 
The powerful, roomy and solid Charger SXT model is powered by the standard Pentastar 3.6-liter V-6, rated at 292 horsepower and 260 lb.-ft. of torque, working with a TorqueFlite eight-speed automatic transmission. For 2019, Charger SXT includes electronic stability control, remote start, cruise control, electric power steering, capless fuel filler, automatic halogen projector headlamps with LED accents and three 12-volt power outlets.
 
Available options for SXT include Houndstooth cloth sport seats, a new Caramel Nappa leather interior, the popular Blacktop Package, which includes a new 20-inch Black Noise wheel, and the new Cold Weather Package, which includes heated steering wheel and heated cloth driver and passenger seats.
 
Charger Exterior Colors
Available exterior colors for all 2019 Dodge Charger models include B5 Blue, Destroyer Grey, F8 Green, Go Mango, Granite Crystal, IndiGo Blue, Maximum Steel, Octane Red, Pitch Black, Plum Crazy, TorRed, Triple Nickel and White Knuckle.
  • The entire lineup has been given the once-over 

Sport is one of the most misused terms in the automotive segment. It could mean that a vehicle has been given a once-over in terms of the engine and suspension to give it an edge. But it could also mean that a vehicle has been gifted a body kit to make it look sporty. This brings us to the 2018 Genesis G80 Sport. Which version of sport did they decide to go with?
Exterior changes on the G80 Sport are small with a copper grille surround, mesh grille, a more aggressive front bumper, 19-inch multi-spoke wheels, quad-exhaust tips, and exclusive colors like the Polar Ice on this vehicle. The small changes really transform the G80 into something a bit sinister. Inside, the G80 Sport swaps the standard steering wheel for a three-spoke sport version, new transmission selector, aluminum pedals, and carbon-fiber accents. The rest of the interior is standard G80 with a clean dash, controls within easy reach, and plenty of rear legroom. Headroom is at a premium due to the standard sunroof. Passengers in the front get a set of sport seats with increased bolstering. It makes a huge difference as you don’t feel like you’re going to fall out on a twisty road. The seats also retain the long road-trip comfort that I have praised previously in the G80 3.8. Sport models come with a 9.2-inch touchscreen infotainment system and controller knob. This system is towards the top of the class with an intuitive interface and fast processing for various functions. One of biggest complaints with the last G80 I reviewed was the lack of Apple CarPlay and Android Auto compatibility. This has been addressed in 2018 model as both come standard. Genesis has also added a second USB port for those sitting in the front which means you’re not fighting with your passenger as to who gets to charge their phone. Now, they just need to add some for those in the back seat. Power comes from a new 3.3L twin-turbo V6 engine producing 365 horsepower and 376 pound-feet of torque. This is paired up with an eight-speed automatic and in my test car, Genesis’ HTRAC all-wheel drive system. Rear-wheel drive is standard. When you step on the accelerator, you might not think that a turbo engine resides under the hood as there is no turbo lag or a deaden throttle response. The engine just gets up and goes on its merry way. It would have been nice if there was some sort of exhaust note to go with the new engine. No complaints about the eight-speed automatic. It delivers smooth and quick shifts. Fuel economy is still a weak point for Genesis. The Sport with AWD is rated by the EPA at 17 City/24 Highway/20 Combined. My average for the week landed around 19.8 mpg with a 60/40 mix of city and highway driving. Opting for RWD only boosts the highway figure to 25. For the suspension, Genesis retuned the Continuous Damping Control (CDC) system to help minimize body motions. It makes some difference when the car is put into Sport mode and dampers firm up to reduce body motion. But it cannot fully overcome the biggest problem with the G80, weight. The Sport AWD tester tips the scales 4,674 pounds. Sticking with RWD only drops overall weight by 155 pounds. It is noticeable around corners as the G80 doesn’t glide, but lumbers. The steering would have benefited greatly from having a bit more weight and feel. On the upside, the G80 Sport’s ride is surprisingly smooth. Despite the larger wheels and altered CDC system, most bumps and imperfections were turned into mere ripples.  The Sport sits between the 3.8L and 5.0L in the G80 lineup. Pricing begins at $55,250 for the RWD model and $57,750 for the HTRAC AWD model. This particular test car came to an as-tested price of $58,725 after destination. This is an impressive value when you take into consideration the long list of standard equipment - heated and ventilated front seats, 17-speaker Lexicon audio system, color heads-up display, LED head and taillights, sunshades for the rear passengers, multi-view camera system, and adaptive cruise control. Plus, all Genesis models have a 3 year/36,000 mile complimentary maintenance plan and service valet which pickups your vehicle to be serviced. For the most part, the 2018 Genesis G80 Sport delivers on ‘sport’ with an aggressive exterior and punchy twin-turbo V6. Ultimately, the handling is where the G80 Sport falters somewhat. I think if Genesis was able to put the G80 on a bit of a diet, it would do wonders. But that doesn’t look like that will happen until the next-generation model that is expected to arrive in the next few years. Disclaimer: Genesis Provided the G80 Sport, Insurance, and One Tank of Gas
Year: 2018
Make: Genesis
Model: G80
Trim: Sport AWD
Engine: 3.3L Twin Turbo DOHC 24-Valve V6 with D-CVVT
Driveline: Eight-Speed Automatic, All-Wheel Drive
Horsepower @ RPM: 365 @ 6,000
Torque @ RPM: 376 @ 1,300-4,500
Fuel Economy: City/Highway/Combined - 17/24/20
Curb Weight: 4,674 lbs
Location of Manufacture: Ulsan, South Korea
Base Price: $57,750
As Tested Price: $58,725 (Includes $875.00 Destination Charge)
Options: N/A
  • Sport or 'Sport'?

Hyundai has announced the pricing for the redesigned Santa Fe that will be arriving later this summer. Pricing will range from $26,480 for the base SE FWD equipped with the 2.4L four-cylinder (185 horsepower and 174 pound-feet of torque) to $39,780 for the Ultimate AWD with the turbocharged 2.0L four-cylinder (235 hp and 260 lb-ft). Prices include a $980 destination charge.
So what do you get for your money?
SE: 17-inch alloy wheels, automatic headlights, 7-inch touchscreen with Apple CarPlay and Android Auto compatibility; and Hyundai SmartSense (suite of active and passive safety features including automatic emergency braking, adaptive cruise control, blind-spot monitoring, and high beam assist). SEL: Keyless entry and start, heated side mirrors, 7-inch color screen for the instrument cluster, power driver's seat, and heated front seats. SEL Plus: 18-inch wheels, hands-free tailgate, dual-zone automatic climate control system, and a 12-speaker Infinity audio system with a subwoofer. Limited: LED headlights and taillights; panoramic sunroof, leather upholstery, and power passenger's seat. Ultimate: Surround-view camera system, rain-sensing wipers, heated steering wheel, ventilated front seats, heated rear seats, color heads up display, and a 8-inch infotainment system with navigation. Be aware that the Santa Fe will be replacing the Sport in Hyundai's lineup. The current Santa Fe with three-rows will be renamed the Santa Fe XL. It will be replaced by a new three-row crossover in the near future.
Source: Hyundai


Hyundai Announces Pricing for All-New 2019 Santa Fe
Entry level price only increases $550 easily offset with more content when compared with the 2018 Santa Fe Sport Fourth generation model offers family-oriented interior, loaded with practical cutting-edge technologies, bold exterior looks and Hyundai SmartSense safety and convenience features FOUNTAIN VALLEY, Calif., June 27, 2018 – Hyundai Motor America has announced pricing for its all-new 2019 Santa Fe, starting at $25,500 for the SE 2.4 model. New standard features on the 2019 Santa Fe SE trim include:
Hyundai SmartSense Forward Collision-Avoidance Assist Blind-Spot Collision-Avoidance Assist Rear Cross-Traffic Collision-Avoidance Assist Safe Exit Assist Lane Keeping Assist Driver Attention Warning Smart Cruise Control with Stop and Go High Beam Assist Bolder design Increased visibility, cabin and storage space Idle Stop and Go Eight-speed automatic transmission Improved EPA estimated fuel economy of 25 mpg combined Rear View Monitor with parking guidance Android Auto™ and Apple CarPlay™ Dual front and rear 2.1-amp USB charge ports The all-new Santa Fe includes all of this with a small price increase of $550 compared with the 2018 Santa Fe Sport.
The five-passenger Santa Fe Sport is now called Santa Fe. The current long wheelbase three-row, seven-passenger model called Santa Fe will be renamed Santa Fe XL for the 2019 model year. An all-new three-row, eight-passenger SUV is currently under development and will carry an all-new name.
“The new Santa Fe underlines our commitment to safety through new standard features like Forward Collision-Avoidance Assist, Blind-Spot Collision-Avoidance Assist and Rear Cross-Traffic Collision-Avoidance Assist,” said Mike O’Brien, vice president, product, corporate and digital planning, Hyundai Motor America. “We have been a leader in adopting key safety features into our vehicles at attractive prices. Families are going to really appreciate Santa Fe’s blend of technology, interior space and striking looks.”
Model
Drivetrain
MSRP*
SE 2.4
Front-Wheel Drive
$25,500
SE 2.4
All-Wheel Drive
$27,200
SEL 2.4
Front-Wheel Drive
$27,600
SEL 2.4
All-Wheel Drive
$29,300
SEL Plus 2.4
Front-Wheel Drive
$29,800
SEL Plus 2.4
All-Wheel Drive
$31,500
Limited 2.4
Front-Wheel Drive
$32,600
Limited 2.4
All-Wheel Drive
$34,300
Ultimate 2.4
Front-Wheel Drive
$35,450
Ultimate 2.4
All-Wheel Drive
$37,150
Limited 2.0T
Front-Wheel Drive
$34,200
Limited 2.0T
All-Wheel Drive
$35,900
Ultimate 2.0T
Front-Wheel Drive
$37,100
Ultimate 2.0T
All-Wheel Drive
$38,800
*Freight charges for the 2019 model year Santa Fe are $980. Pricing in this release does not include freight.
  • Remember, this is the replacement for the Santa Fe Sport

Previous Page Next Page The Dodge Challenger SRT Demon is no more for 2019, but that doesn't mean it hasn't influenced the lineup.
Lets begin with the Challenger SRT Hellcat Redeye. Under its dual cowl hood is a revamped supercharged 6.2L V8 producing 797 horsepower and 707 pound-feet of torque. Power flows through an eight-speed automatic to the rear-wheels. Dodge claims the Redeye is the "most powerful production V8" and "quickest production muscle car," most likely because the Demon doesn't exist anymore. Here are the numbers,
0-60 mph: 3.4 seconds Quarter-Mile: 10.8 seconds Top Speed: 203 mph This increase in power is due to Dodge upgrading 25 major components including a bigger supercharger, strengthened engine internals, high-capacity fuel injection system, second-fuel pump, and improved lubrication. The Demon also hands over the Torque Reserve system that builds up power before launching from a standing stop, and After-Run Chiller that cools down the supercharger when the engine is off.
Down one rung is the regular Hellcat. Dodge has increased horsepower to 717, along with adding Launch Assist, Torque Reserve, Launch Control, and Line Lock. A dual-cowl hood is standard.
Both Hellcat models will have the option of a widebody that features larger fender flares to make room for the wider tires.
Dodge also announced the R/T Scat Pack Widebody that features the same wide fender flares as the Hellcat, rear spoiler, SRT tuned chassis, and adaptive dampers. The changes make a huge difference as the Scat Pack Widebody is about two seconds faster per lap than the standard Scat Pack. All Scat Pack models get Launch Assist, Launch Control, Line Lock, SRT Drive Modes, and SRT Performance Pages.
Wrapping up the 2019 Challenger lineup is the R/T and GT rear-wheel drive. The previously-optional Super Track Pak is now standard for both models and includes a performance suspension, enhanced steering, a new front splitter and hood, 20-inch wheels, and bolstered cloth Houndstooth seats.
The 2019 Challenger family arrives in the fourth quarter.
 
Source: Dodge
New 2019 Dodge Challenger SRT Hellcat Redeye: Possessed by the Demon
New Dodge Challenger SRT Hellcat Redeye and Its 797-horsepower Supercharged HEMI® High-output Engine Drive 2019 Challenger Lineup Dodge launches most powerful SRT Hellcat lineup ever The new 2019 Dodge Challenger SRT Hellcat Redeye is the most powerful, quickest and fastest muscle car Most powerful production V-8 engine with 797 horsepower and 707 lb.-ft. of torque Quickest production muscle car with 0-60 miles per hour (mph) acceleration of 3.4 seconds Fastest grand touring (GT) production car with a ¼-mile elapsed time (E.T.) of 10.8 seconds at 131 mph; and reaches a new top speed of 203 mph 2019 Dodge Challenger SRT Hellcat boasts new rating of 717 horsepower and 656 lb.-ft. of torque A new dual-snorkel hood on all Hellcat models pays homage to the distinctive Dodge design themes from some of its most famous muscle cars, including the 1970 Dart Swinger and 1971 Demon  Challenger R/T Scat Pack Widebody features the same fender flares from SRT Hellcat Widebody, which add 3.5 inches to the overall width R/T Scat Pack Widebody rides on sticky 305/35ZR20 Pirelli tires mounted to 20 x 11-inch forged “Devil’s Rim” aluminum wheels   All 2019 R/T Scat Pack models feature the power-bulge aluminum hood with heat extractors formerly featured on the Challenger SRT Hellcat Challenger R/T and GT RWD models get standard high-performance suspension June 28, 2018 , Auburn Hills, Mich. - No rest for the wicked, indeed.
 
Dodge continues to push the performance envelope in 2019, using its high-performance engine street credibility to elevate its entire Challenger lineup, introducing the most powerful supercharged SRT Hellcat lineup ever with horsepower output now starting at 717.
 
And that’s just the beginning.
 
Following a record-setting year with the introduction of the limited-production Dodge Challenger SRT Demon – the quickest, fastest and most powerful muscle car ever – Dodge//SRT is going back to its muscle car roots by taking its biggest, most powerful engine – the supercharged HEMI® Demon V-8 – and leveraging its enormous power output to boost the performance of the Hellcat. The result: the 797-horsepower 2019 Dodge Challenger SRT Hellcat Redeye.
 
“With 840 horsepower, a 9.65 quarter-mile time and Guinness World Record certification that it’s the first production car to lift the wheels at launch, the Dodge Challenger SRT Demon earned its place in the record books,” said Steve Beahm – Head of Passenger Cars, Dodge//SRT, Chrysler and FIAT, FCA North America. “The Dodge Brothers would be proud that we’re leveraging the power and performance of this proven engine to bring a Demon-possessed Challenger SRT Hellcat Redeye to an even wider high-performance enthusiast audience.”
Also new for 2019, Dodge offers the Widebody Package on the Challenger R/T Scat Pack model, which adds 3.5 inches to the overall width, improving handling and braking to the naturally aspirated muscle car. At the track, larger six-piston Brembo front brakes, wider wheels and tires, and suspension upgrades featured on the R/T Scat Pack Widebody equate to 2-second faster lap times or approximately 12 car lengths at a 2.1-mile road course, compared with the non-Widebody Challenger R/T Scat Pack.
 
Production of the 2019 Dodge Challenger lineup starts at the Brampton (Ont.) Assembly Plant in the fall of 2018, with vehicles starting to arrive in dealerships in the fourth quarter.
Demon engine drives most powerful Hellcat lineup ever   
Designed and engineered with more power to appeal to an even broader muscle car enthusiast audience, the heart of the new 2019 Dodge Challenger SRT Hellcat Redeye comes from its limited-production big brother – the Dodge Challenger SRT Demon. The supercharged 6.2-liter HEMI high-output V-8 engine is rated at 797 horsepower and 707 lb.-ft. of torque and is mated to a TorqueFlite 8HP90 eight-speed automatic transmission.
 
Like its Demon brethren, it has 25 major component upgrades, including a larger supercharger, strengthened connecting rods and pistons, high-speed valve train, fuel injection system and improved lubrication system.
 
Compared with the standard SRT Hellcat engine, the Redeye’s supercharged high-output engine features:
Largest factory supercharger of any production car – 2.7 liters versus 2.4 liters Increased boost pressure: 14.5 psi versus 11.6 psi Higher rpm limit: 6,500 rpm versus 6,200 rpm Fuel: Two dual-stage fuel pumps versus one At full throttle, the Dodge Challenger SRT Hellcat Redeye’s high-output engine consumes 1.43 gal/min (5.4 liters/min) of fuel – enough to drain the fuel tank in just under 11 minutes, yet is still rated at 22 miles per gallon (mpg) when driven in normal highway conditions Larger induction air box with three sources of intake air: New dual-snorkel hood Driver-side Air Catcher headlamp Inlet near the wheel liner  Additional features from the SRT Demon that help the Challenger SRT Hellcat Redeye achieve its status as the most powerful, quickest and fastest muscle car:
Torque Reserve delivers up to 3.9 psi of boost at launch and up to 55 percent more engine torque   Only factory production car with both SRT Power Chiller™ and After-Run Chiller High-strength steel prop shafts provide a 15 percent increase in torque capacity 41-spline half shafts provide a 20 percent increase in torque capacity  New for 2019, SRT Hellcat Redeye offers two final drive ratios, a standard 2.62:1 or available 3.09:1 for enhanced launch capability. 
 
The 2019 Challenger SRT Hellcat lineup delivers improved performance numbers, including a new top speed of 203 miles per hours (mph), making the Challenger SRT Hellcat Redeye the most powerful, quickest and fastest muscle car.
Challenger SRT Models 1/4-mile elapsed time/speed Top Speed Redeye Widebody 10.8 seconds @ 131 mph 203 mph Hellcat Widebody 10.9 seconds @ 127 mph 195 mph Redeye 11.1 seconds @ 131 mph 203 mph Hellcat 11.2 seconds @ 125 mph 199 mph  
 
 
Functional and intimidating exterior design
The newly designed, fully functional dual-snorkel hood provides maximum air intake to the supercharged powerplant and pays homage to the distinctive design themes from some of the most famous mid-1960s and early-1970s Dodge muscle cars, like the 1970 Dart Swinger and 1971 Demon. 
 
"We designed the SRT Hellcat Challenger’s new dual-snorkel hood to focus on another key historical Mopar design element and pay homage to our past with a modern interpretation that looks even more sinister," said Mark Trostle – Head of Performance, Passenger and Utility Vehicle Exterior Design, FCA US LLC. “Whenever we design a new exterior element, we work hand-in-hand with the SRT engineering team to ensure that everything we create resonates with SRT DNA, is functional and meets their performance goals."
 
Even the dual carbon or gunmetal stripe packages have been skillfully tailored to enhance the new dual-snorkel hood design.
 
In addition to the new dual-snorkel hood, the exterior of Challenger SRT Hellcat Redeye receives enhanced badging showing a sinister red jewel-like eye design on the Hellcat that jumps off the Midnight Grey Metallic finish fender badge. A new die-cast SRT emblem on the supercharger housing also features the new Redeye logo. 
 
Available on Challenger SRT Hellcat and R/T Scat Pack models for 2019 is the Widebody Package first seen on the 2018 Challenger SRT Hellcat. Wider fender flares add 3.5 inches to the overall width of the vehicle resulting in a more muscular, planted stance. The new flares are expertly integrated into the body design with concealed attachments to amplify the Challenger SRT Hellcat’s width. The front side marker lights are styled to flow with the shape of the fender flares.
 
An available new Satin Black spoiler on both SRT Hellcat and R/T Scat Pack models is both wider and longer, offering a more expressive look while meeting all SRT performance objectives.
 
Standard on 2019 SRT Hellcat models are 20 x 9.5-inch SRT Low Gloss Black lightweight performance wheels while new 20 x 9.5-inch split five-spoke wheels with Brass Monkey finish are available.   
 
Customers opting for the Widebody Package will get available split-five spoke, 20 x 11-inch “Devil’s Rim” forged aluminum wheels, riding on sticky 305/35ZR20 Pirelli P-Zero tires for improved performance while accentuating the menacing look.
Beating the heat
Heat is the enemy of any high-performance powertrain, so Dodge//SRT engineers looked for more ways to keep the intake air as close to the optimum temperature as possible.
 
One key to the engine’s imposing power output is air – and plenty of it. The new, low-restriction, dual snorkel hood is fully functional and sealed to the air box.
When combined with the Air Catcher headlamp and an inlet near the wheel liner, these three sources give the SRT Hellcat Redeye’s high-output engine an 18 percent greater air-flow rate than last year’s SRT Hellcat engine (1,134 cubic feet per minute). At full power, this is the equivalent flow rate to 89 adults simultaneously emptying their lungs in 1 second.
 
The revised air inlet path on the new dual snorkel hood results in an intake air temperature reduction of 4 degrees Fahrenheit.
 
The innovative, award-winning SRT Power Chiller™, standard on the Challenger SRT Hellcat Redeye only, diverts the air-conditioning refrigerant from the interior cabin to a chiller unit mounted by the low-temperature circuit coolant pump. Charge air coolant, after being cooled by ambient air passing through a low-temperature radiator at the front of the vehicle, flows through the chiller unit, where it is further cooled. The chilled coolant then flows to the heat exchangers in the supercharger.
 
The SRT Power Chiller™ lowers the intake air temperature further on the Challenger SRT Hellcat Redeye, resulting in improved performance.
 
The After-Run Chiller, also an industry first, minimizes any heat soak effects, allowing the engine to stay in optimum operating temperature. When the engine shuts down, the After-Run Chiller, now standard across the Challenger SRT Hellcat model lineup in 2019, keeps the engine’s cooling fan and low-temperature circuit coolant pump running to lower the supercharger/charge air cooler temperature. The driver can track the supercharger coolant temperature on the SRT Performance Pages in the 8.4-inch Uconnect touchscreen and know in real time when the supercharger is at the optimum temperature for another run.
2019 Challenger SRT Hellcat lineup: more horses, expanded technologies and more features  
From 717 to 797 horsepower, Dodge is delivering the most powerful Challenger SRT Hellcat lineup ever.  Both a manual and automatic transmission are available to handle the immense horsepower and torque output.
 
The Challenger SRT Hellcat receives a standard Tremec six-speed manual transmission, while the efficient TorqueFlite 8HP90 eight-speed automatic transmission is available.
 
The Challenger SRT Hellcat Redeye’s supercharged high-output engine is paired to the TorqueFlite 8HP90 eight-speed automatic transmission. Internal changes to the transmission include an upgraded torque converter that delivers an 18 percent increase in torque multiplication when compared with the standard Challenger SRT Hellcat.
 
All 2019 Challenger SRT Hellcat models are loaded with standard performance features, including:
Adaptive Damping Suspension — SRT-tuned Bilstein three-mode Adaptive Damping Suspension system includes: Auto Mode = sporty but compliant ride; Sport Mode = firm, maximum handling; Track Mode = firm, maximum handling plus performance shifting and gear-holding feature Braking system — braking power comes from the standard Brembo brake system with two-piece, 15.4-inch front rotors and six-piston front calipers for outstanding heat management, thermal capacity and longevity Electric power steering (EPS) — electric power steering delivers better steering feel and ease of turning efforts at parking lot speeds. It can be calibrated to optimize steering effort for a variety of driving situations via settings in the SRT Performance Pages Launch Assist — launched on the Challenger SRT Demon as a factory-production car first, Launch Assist helps resolve one of the biggest challenges to clean launches and driveline integrity – wheel hop, which happens when tires quickly slip and regain traction at launch, rapidly storing up and releasing energy in the driveline. These high torque spikes can quickly and severely damage driveline components, and up until now, the only solution was to back out of the throttle. The 2019 Challenger SRT Hellcat models use the wheel speed sensors to watch for signs that the tires are slipping/sticking. If hop is detected, the engine control module momentarily reduces torque to maximize traction almost instantly – without the driver having to lift the throttle. Launch Assist reduces loads in the driveline from wheel hop by up to 20 percent Torque Reserve — becomes active once the engine speed passes 950 rpm. The system closes the bypass valve, “prefilling” the intake with boost, manages fuel flow to cylinders and manages spark timing to balance engine rpm and torque Launch Control — holds the engine at optimal launch RPM and waits for the driver to release the brake. Launch Ccontrol then uses engine torque management to optimize wheel slip for maximum acceleration. All 2019 Challenger models with Launch Control receive an improved system that increases hold time from five to 10 seconds for optimal launch and consistent straight-line acceleration Line Lock — engages the front brakes to hold the Challenger stationary but leaves the rear wheels free for a burnout to heat up and clean the rear tires. The system will also let the driver perform a controlled rolling burnout and can engage for up to 200 rear wheel revolutions Larger induction air box — with three sources of intake air: new dual-snorkel hood, driver-side Air Catcher headlamp and inlet near the wheel liner SRT Drive Modes — accessed via the 8.4-inch Uconnect touchscreen, drivers can tailor their experience by adjusting horsepower, transmission shift speeds, steering effort, paddle shifters, traction and suspension settings. SRT Drive Modes offer selectable settings for Street (Auto), Sport and Track. There is also a Custom setting for the driver to select individual preferences SRT Performance Pages — bring critical vehicle performance data to the driver’s fingertips, including a real-time dyno graph, g-force heat map and much more Also available on Challenger SRT Hellcat and R/T Scat Pack is the Rear Seat Delete Group, which allows customers to delete the rear seats, rear seat belts and add a rear cargo net. 
Race-inspired, high-performance interior
Refocusing the Hellcat on its performance roots, the 2019 Challenger SRT Hellcat lineup features standard Houndstooth cloth performance seats.
 
Three other seat options are available:
Nappa leather/Alcantara with embroidered SRT Hellcat logo (available with Plus Package) Laguna leather with embossed SRT Hellcat logo (available with Laguna Leather Package)   Laguna leather/Alcantara with embossed SRT Hellcat logo (available with Alcantara Appearance Package)   The SRT Hellcat interior features a signature leather-wrapped, flat-bottom steering wheel with a backlit SRT logo and paddle shifters. Red gauges with a 200-mph speedometer flank the 7-inch display screen, which features performance timers and a Hellcat logo splash screen at start-up.
 
Complementing the race-inspired cockpit are silver seat and console stitching, Light Black Chrome accents and a Gunmetal SRT Hellcat instrument panel badge.
 
The 2019 Challenger SRT Hellcat Redeye has several unique interior features, including:
220-mph red speedometer SRT Hellcat Redeye logo splash screen Light Black Chrome instrument panel badge with SRT Hellcat Redeye logo SRT Hellcat Redeye logo on the key fobs Dodge Challenger R/T Scat Pack offers new standard hood; Widebody exterior available
The Dodge Challenger R/T Scat Pack continues to offer the most muscle for the dollar in the segment with 485 horsepower and a starting U.S. Manufacturer's Suggested Retail Price (MSRP) less than $40,000. Power comes from the proven, naturally aspirated, 392-cubic-inch HEMI V-8 engine’s best-in-class 485 horsepower and 475 lb.-ft. of torque.
 
New for 2019, all Challenger R/T Scat Pack models get a new look, courtesy of the 2018 Challenger SRT Hellcat. The power-bulge aluminum hood features a dedicated air intake flanked by dual-air extractors to ensure effective removal of heat and reduced air turbulence in the engine compartment. Standard illuminated Air Catcher headlamps feed additional air directly into the engine bay. 
 
Also new for 2019, R/T Scat Pack buyers can leverage the on-track performance capabilities of the SRT Hellcat Widebody.    
 
Featuring the same fender flares from SRT Hellcat Widebody, which add 3.5 inches to the overall width, the new R/T Scat Pack Widebody rides on sticky 305/35ZR20 Pirelli tires mounted to 20 x 11-inch forged “Devil’s Rim” aluminum wheels.   
 
Many high-performance features are now standard on all a Challenger R/T Scat Pack models, including:
Launch Control Launch Assist Line Lock SRT Drive Modes SRT Performance Pages The Challenger R/T Scat Pack Widebody adds:
SRT-tuned chassis, featuring stiffer front springs, retuned shock absorbers and larger sway bars in both front and rear SRT-tuned high-performance adaptive damping suspension  Front fascia with integrated splitter optimizes airflow to the cooling modules without compromising vehicle balance Rear spoiler from the Hellcat helps to deliver responsive and balanced handling As a result, the R/T Scat Pack Widebody delivers its best on-road and on-track performance ever, with an improvement of close to 2 seconds per lap or 12 car lengths compared with the R/T Scat Pack. In a quarter-mile comparison, the new Challenger R/T Scat Pack Widebody gained .2 seconds – running 12.1 seconds E.T. at 112 mph.
 
The Challenger R/T Scat Pack’s superb stopping power comes from the SRT-engineered Brembo brake system with six-piston front and four-piston rear calipers, resulting in braking (60-0 mph) performance improving to 108 feet (from 111 feet). 
 
Exterior badging on the R/T Scat Pack includes new Scat Pack Bee badges that face forward on both fenders. Challenger script and R/T logos flank both sides of the front grille.
 
Inside the performance interior are front seats that feature the Scat Pack Bee logo embroidered into the seat backs; new Dark Dub Plate finish on instrument panel and console and new Liquid Titanium accents on the steering wheel, shifter and cluster bezels.
Challenger R/T and GT RWD Models Gain More Performance
Not to be outdone, the 2019 Challenger R/T and new GT rear-wheel-drive (RWD) models extend their performance capabilities with standard Super Track Pak features, including:
Performance suspension Enhanced steering 20-inch Granite Crystal painted wheels Steering wheel mounted paddle shifters (with automatic transmission) Performance hood and front splitter Performance bolstered cloth Houndstooth seats Available on both the Challenger R/T and GT RWD models for 2019 is the Performance Handling Group, which brings enhanced braking and handling capabilities. On GT RWD, the Performance Handling Group features four-piston Brembo brakes (front and rear), wider 20 x 9-inch Black Noise wheels and a larger rear sway bar for improved driving experience and reduced understeer.
 
The Performance Handling Group on the Challenger R/T adds upgraded springs, sway bars, Bilstein shocks, bushings and mounts, helping to improve performance and response during spirited driving. For the driver looking to get even more out of the Challenger R/T model, the new Performance Plus Package adds track ready 20 x 9.5-inch forged wheels riding on 275/40ZR20 Pirelli P-Zero tires, limited-slip differential and enhanced handling balance for improved cornering performance.
Fourteen different distinct Dodge//SRT colors available across Challenger lineup
Dodge Challenger customers have a wide array of exterior colors and stripes from which they can choose to customize their muscle car. Fourteen different exterior colors and a wide variety of interior trim selections, including:
B5 Blue Destroyer Grey F8 Green Go Mango Granite Crystal Indigo Blue Maximum Steel Octane Red Pitch Black Plum Crazy TorRed Triple Nickel (NEW) White Knuckle Yellow Jacket Available Interior Colors:
Black Black/Caramel Black/Ruby Red Demonic Red Sepia Previous Page Next Page
  • Because More Power Sells

Automakers have been edge for a few months with talk of a trade war and possibly putting up to a 25 percent tariff on imported new vehicles. They only would be pushed further to the edge as President Donald Trump tweeted last week a 20 percent import tariff on all cars assembled in the European Union. Now, automakers are rebuking the President over this.
Reuters reports today that two trade groups, representing nearly every major global automotive brands have issued comments saying the president shouldn't go forward with tariff. The two groups in question are the Association of Global Automakers (represents Honda, Hyundai, Kia, Nissan, Subaru, Toyota, and others) and Alliance of Automobile Manufacturers (represents General Motors, Ford, FCA, BMW, and others). 
The primary concerned brought up by both groups? Jobs. 
“Rather than creating jobs, these tariffs would result in the loss of hundreds of thousands of American jobs producing and selling cars, SUVs, trucks and auto parts,” said the Association of Global Automakers.
Both groups cite a study done by the Peterson Institute for International Economics which estimates job losses between 195,000 to 624,000 depending if other countries retaliate with their own tariffs.
Next up is the increased cost on a new vehicle. The Alliance of Automobile Manufacturers says a consumer could expect to pay an average of $5,800 more on a new car. This number is based on analysis of 2017 sales data and factoring in a 25 percent tariff. New cars are already expensive - Kelly Blue Book said the average transaction price for May stood at $35,635.
The final concern brought up deals with a decrease in investments into new technologies such as electrification and autonomous vehicles.
“We are already in the midst of an intense global race to lead on electrification and automation. The increased costs associated with the proposed tariffs may result in diminishing the U.S.’ competitiveness in developing these advanced technologies,” said the Alliance.
The U.S. Commerce Department which is investigating new car imports on the national security has said that it hopes to wrap up their investigation either next month or August.
Source: Reuters
  • This is a terrible idea. -Automakers to Trump

During the reveal of the 2018 Volvo S60 last week, it was announced that the S60 T8 Polestar Engineered would be offered in "extremely limited quantities." The automaker wasn't lying as there will be 20 models up for grabs in the U.S. that will be available only through the Care by Volvo app.
The S60 T8 Polestar Engineered packs 415 horsepower and 494 pound-feet of torque, along with Öhlins suspension, large Brembo brakes, and various interior enhancements.
It will also be the most the expensive model in the Care by Volvo program, carrying a monthly fee of $1,100 per month. Should be noted that monthly fee does include maintenance and insurance.
If you're interested in being one of the twenty people to get a S60 T8 Polestar Engineered, you'll need to be quick with your smartphone. Volvo says orders will open tomorrow at Noon eastern time.
Source: Volvo


Volvo Car USA Announces On Sale Date, Pricing for S60 T8 Polestar Engineered
ROCKLEIGH, NJ (June 27, 2018) – Volvo Car USA announced the S60 T8 Polestar Engineered sedan will be available in extremely limited quantity, with only 20 of the 415hp vehicles available in the United States. These will be available for subscription tomorrow, June 28 after noon ET, exclusively through the Care by Volvo app.
 
Care by Volvo customers can simply choose their S60 T8 Polestar Engineered in app and make all-inclusive, monthly payments that cover insurance, service, and maintenance. The all-inclusive pricing of the S60 T8 Polestar Engineered is $1100 per month before local taxes and registration fees.
 
Polestar Engineered, developed with Volvo Cars’ electric performance arm Polestar, is a complete offer, applying Polestar’s performance engineering expertise to the car’s wheels, brakes, suspension and engine control unit. The offer reflects Volvo Cars’ and Polestar’s commitment to electrification.
 
Additional details:
S60 T8 eAWD Polestar Engineered Only 20 available in the United States MY19 exclusively available via the Care by Volvo App 415-hp, 494 lb/ft torque Polestar Optimized T8 Plug-In Hybrid Powertrain Polestar Engineered Öhlins Suspension Polestar Engineered Brembo Brakes with Gold Calipers Polestar Engineered Strut Bar Exclusive 19” Forged Alloy
  • Did we mention it is also the most expensive model available through Care by Volvo?

Last September, Jaguar Land Rover announced plans to begin electrifying their lineup in 2020. This means electrics, hybrids, and plug-in hybrids. There is a good reason why JLR is doing this. Bloomberg reports that the company is very dependent on diesels in Europe. In the fourth quarter of last year, 87 percent of JLR sales in the region were made up of diesel vehicles - surprising to say in the least as sales of diesels for other brands were dealing due to the Volkswagen diesel emission scandal. But it is starting to hurt Jaguar Land Rover. The company said total sales and revenue through March “did not grow as much as we planned” due to customers becoming very concerned about diesel vehicles. Margins and profit also took a hit.
To pull this off, JLR needs to spend a lot of money. At a presentation for investors yesterday, the company announced that it would be spending 13.5 billion pounds ($18 billion) for the next three years as part of their electrification plans. A fair chunk of the investment will go to JLR's plants in the United Kingdom for retooling. The goal is to offer three versions of all their models, including hybrid and plug-in hybrid models. Electric-only models will only be offered if there is enough customer demand according to a spokesman.
Source: Bloomberg (Subscription Required)
  • $18.5 billion over the next three years

Ram Trucks is following in the footsteps of Jeep, Nissan, and Volkswagen by selling the previous-generation 1500 alongside the new model for the 2019 model year. Known as the 2019 Ram 1500 Classic, it will be offered in four different trims; Tradesman, Express, Big Horn/Lone Star, and SSV (Special Services Vehicle). Those wanting a Laramie, Rebel, or Limited will need to step up to the new truck.
But Ram is still offering three cab options (Regular, Quad, and Crew) and bed lengths (5'7"; 6'4', and 8'). The 3.6L Pentastar V6 and 5.7L HEMI V8 will be available, while the 3.0L EcoDiesel is expected to arrive at a later date. There will be a choice of two-wheel or four-wheel drive.
“As we launch the all-new 2019 Ram 1500, we didn’t want to walk away from a key part of the light-duty truck market. Ram will continue to produce the 1500 Classic targeted at entry and commercial buyers,” said Mike Manley, Head of Ram Brand.
We have to wonder if the decision to keep the previous-generation 1500 for another year is due to the numerous production issues for the new 1500. As we reported in April, the Sterling Heights Assembly plant where the 2019 Ram 1500 is built is only operating at "60 percent of cycle." Not helping are issues with suppliers delivering enough parts and the mild-hybrid powertrains not in production.
Source: Ram Trucks


Ram Truck Brands Its Legacy Half-ton with ‘Classic’ Badge for 2019 MY to Sell Alongside the All-new 2019 Ram 1500

June 26, 2018, Auburn Hills, Mich. - What do you call a 2019 Ram 1500? A Classic!
 
Ram Truck brand executives, with two concurrently selling body styles of its 2019 model-year pickup, have given the legacy edition its own name: Classic.
 
Ram will offer both the 2019 Ram 1500 Classic, known internally as the “DS” model, and the all-new 2019 Ram 1500 (“DT”) at its North American dealers through the 2018 calendar year.
 
“As we launch the all-new 2019 Ram 1500, we didn’t want to walk away from a key part of the light-duty truck market,” said Mike Manley, Head of Ram Brand — FCA. “Ram will continue to produce the 1500 Classic targeted at entry and commercial buyers.”
 
The Ram 1500 Classic boasts numerous segment-exclusive features in areas most important to truck buyers. Class-leading ride and handling is accomplished via a unique link-coil rear suspension system. Other features, such as RamBox bedside storage, hidden bins and a flat-load floor, offer unique solutions for cargo. New “Classic” badging is located on the fenders.
 
Offered in four trim levels, Tradesman, Express, Big Horn/Lone Star and SSV (Special Services Vehicle), the Ram 1500 Classic benefits from content specifically designed to match its capability and style. The Ram 1500 Classic also benefits from three new packages:
Chrome Plus is offered on the Tradesman trim that offers bundled value content, which includes chrome bumpers, body-color upper front fascia, 17-inch wheels, remote keyless entry and carpet floor covering Tradesman SXT is offered on the Tradesman trim that includes chrome bumpers, body-color front fascia, 5-inch radio, fog lamps (new to Tradesman), dual exhaust on V-8 models (new to Tradesman) and 20-inch chrome wheels (new to Tradesman) Express Black Accent Package is offered on all Express trim exterior colors, which includes Black wheels, Black headlight bezels and Black badging The 2019 Ram 1500 Classic is available in three cabs and three bed lengths: Regular Cab with 8-ft. bed or 6-ft., 4-in. bed, Quad Cab with 6-ft., 4-in. bed, Crew Cab short bed (5-ft., 7-in.) or Crew Cab with optional 6-ft., 4-in. bed.
 
Available in 4x2 or 4x4, other powertrain offerings include award-winning 3.6-liter Pentastar V-6 or optional 5.7-liter HEMI® V-8. The optional 3.0-liter V-6 EcoDiesel will be available at a later date.
The Ram 1500 features a segment-exclusive multi-link rear coil suspension that provides best-in-class ride and handling qualities. A coil-spring setup centralizes and absorbs bumps and impacts, while reducing the amount of friction in the spring system. This setup also weighs 40 pounds less than a leaf-spring configuration.
Ram trucks come with an unsurpassed five-year, 60,000-mile powertrain warranty. Truck customers from half-ton to commercial have a demanding range of needs and require their vehicles to provide high levels of capability.
The 2019 Ram 1500 Classic is built at the Warren Truck Assembly Plant (Warren, Michigan), which has built more than 12.5 million trucks since it started operations in 1938. Regular Cab and some Crew Cab models of the 2019 Ram 1500 Classic are built at the Saltillo Truck Assembly Plant in Saltillo, Mexico.
 
Ram 1500 Classic will be available in the fourth quarter of 2018.
  • Yep, the 2018 Ram 1500 is sticking around for another year.

August 30th was going to be a momentous occasion for Audi. It would be unveiling the long-awaited e-tron crossover at an event in Brussels. Invitations to journalists had been sent out. But Automotive News reports that the event has been cancelled.
Audi made the announcement yesterday, citing "organizational reasons". The event would now take place in the U.S. at a later date.
Those "organizational reasons" are most likely due to the arrest of Audi CEO Rupert Stadler last week. Prosecutors took him into custody over concerns of evidence tampering. According to Bloomberg, Stadler will be spending another week in prison as he continues to be interviewed by prosecutors into his involvement in the diesel emission scandal.
This is a big blow for Audi as they would have been the first German automaker to introduce a Tesla fighter. Mercedes-Benz will now get to be the first one with the introduction of the EQC crossover on September 4th in Stockholm.
An Audi spokeswoman told Automotive News that the delay to the e-tron's unveiling will not affect the sales launch of the model, expected to happen later this year.
Source: Automotive News (Subscription Required), Bloomberg (Subscription Required)
  • Slight issue with the CEO currently under arrest

With President Donald Trump tweeting last Friday threating a 20 percent tariff on all imports of European Union assembled cars, the EU has responded by saying it would raise their tariffs on imports of U.S.-built vehicles.
“If they decide to raise their import tariffs, we’ll have no choice, again, but to react,” said EU Commission Vice President Jyrki Katainen.
“We don’t want to fight (over trade) in public via Twitter. We should end the escalation.”
This comes a month after the Trump administration announced an investigation into new car imports on the grounds of national security. U.S. Commerce Secretary Wilbur Ross said late last week the department is expected to wrap up their investigation by late July or August. A number of groups have condemned the investigation and threat of tariffs, one saying that it is “confident that vehicle imports do not pose a national security risk.” Diamler AG announced last week full-year earnings will be slightly lower than last year because of the threat of tariffs.
Source: Reuters
  • Tit for Tat on Tariffs

Tesla and General Motors lead the pack when it comes to the sales of plug-in vehicles. Data from Automotive News says Tesla stands at 193,344 vehicles, followed by GM at 181,062, But there arises a problem; once they cross the 200,000 mark, the phaseout of the $7,500 tax credit begins. Tesla is expected to be first with some predicting it taking place next month (provided they don't run into more production troubles). GM will follow sometime next year.
Barring some sort of extension of the program, it will put the two automakers in a bit of bind where they'll be playing on an uneven playing field due to increased costs. It should be noted that the tax credit won't disappear. The way the phaseout works is that the $7,500 credit sticks around for two more quarters after the 200,000 mark is reached. After that, the credit is cut to $3,750 for the next two quarters, then it drops to $1,875 for two more quarters before it is gone.
"The groundbreakers, the people who forged ahead and got these products out there first, could be at a significant disadvantage now. I don't think it's fair to reward a company that hasn't been as innovative with an incentive that begins when someone else's ends," said Rebecca Lindland, executive analyst at Kelly Blue Book.
Industry experts expect GM to take a bigger hit than Tesla due to the credit affecting decisions on "lower-priced vehicles such as the sub-$40,000 Chevrolet Volt more than a $75,000-plus Tesla Model S or X" according to research done by the Institute of Transportation Studies at the University of California-Davis.
A study in 2016 bears this out. 40 percent of Chevrolet Volt buyers admit they wouldn't have purchased one without the tax credit. Only 14 percent of Tesla buyers say the same. 
This likely explains why various GM executives have been pushing the White House for a possible extension of the credit.
"At the end of the day, we think having the benefits is great for the customer, because obviously it makes the EV adoption easier and more attractive," GM North America President Alan Batey told Automotive News.
Source: Automotive News (Subscription Required)
  • Might become tougher to sell some EVs

It was thought for a time that Volvo's first electric vehicle would be a compact hatchback that took some design ideas from the Concept 40.2. Then we heard that the XC40 would be the first electric vehicle. Now we have gotten some clarification.
“It’s not a secret any more that the first full electric Volvo is on its way with the XC40 coming. It will arrive very soon after the Polestar 2. That is the first to come that’s not exotic. We’ll start with XC40 and then on it will come step after step into our model range. The next car will be the next-generation XC90," said Volvo design chief Thomas Ingenlath.
The Polestar 2, a midsize sedan is expected to go into production in 2019. That puts the launch of the XC40 EV sometime in 2020 or so.
Ingenlath said Volvo would only produce electric versions of the current lineup, not build out new models like other automakers. Polestar will handle build electric models that stand out.
"To look at new formats, new bodystyles and non-traditional elements, we founded Polestar to take care of that end of the scope. We developed that strategy: full electrification of the Volvo range, making it a natural part of the offer, and at the same time developing new, unconventional elements in the Polestar brand." 
Source: Autocar
  • Volvo Dreams of Electric XC40s

Bentley tends to build even faster versions of their models which are denoted by the Speed nameplate. The Bentayga SUV is no exception to this.
Bentley design boss Stefan Sielaff confirmed to Autocar this week that the luxury automaker is working on a Bentayga Speed. The model will get “typical” styling changes Bentley makes when creating Speed versions - revised front end, wider fenders, rear diffuser, and wheels. Autocar reports that more power is expected for the W12 engine. The current engine produces 600 horsepower, so 650 to 700 horsepower isn't out of the question.
No time frame was given as to when the Bentayga Speed would appear. We're guessing 2020 at the earliest.
Source: Autocar
  • More speed? More speed.

Guys, the Blazer is coming back!
Hooray!
Its going to be a crossover that slots between the Equinox and Traverse.
*Blank looks from the crowd*
I'm sure there are some that were hoping that the Blazer nameplate would return on something similar to body-on-frame Trailblazer/Blazer sold in various parts of the world. But if you have been keeping a close eye on Cheers & Gears for the past year or so, then you would know Chevrolet has been working on a crossover to fill in the white space between the Equinox and Traverse possibly named Blazer. Tonight in Atlanta, Chevrolet pulled the curtain back on their new midsize crossover.
The Blazer looks to be a mashup of Camaro and the Nissan Murano crossover. There is a large grille, slim HID headlights, a rising window line that leads to a blacked-out d-pillar, and a sharply raked tailgate. Like the Traverse, the Blazer will have a RS model complete with blacked-out trim and 20-inch wheels. We find the Blazer RS to be a bit too much.
Inside, Chevrolet's designers appeared to have lifted the dash from the Camaro and dropped it in the Blazer. While stylish and driver-centric, it does also introduce some usability issues - see the small and crowded row of buttons for the climate control system as an example. The Blazer will debut Chevrolet's first Cargo Management System that uses rail system and cargo fence to split up the cargo area help secure cargo. All Blazers will get an 8-inch infotainment system with Apple CarPlay and Android Auto compatibility, wireless charging, six USB ports, and 4G LTE connectivity.
Powertrains mirrors what you'll find on the GMC Acadia. This means a 2.5L four-cylinder with 193 horsepower and 188 pound-feet of torque, and a optional 3.6L V6 offering up 305 hp and 269 pound-feet. Both engines come with a stop-start system and a nine-speed automatic. Standard on all models is Traction Select that allows the driver to make adjustments to the vehicle's driving mode to account for different conditions. On all-wheel drive models, Traction Select can disconnect the rear axle when AWD capability is not needed. RS and Premier get a more sophisticated twin-clutch AWD system.
Chevrolet says the Blazer will arrive at dealers in early 2019.
Source: Chevrolet


Bold Design Defines 2019 Chevrolet Blazer
Attention-grabbing midsize SUV offers style and versatility ATLANTA — Chevrolet is raising the bar on crossover design with the introduction of the 2019 Blazer as the newest member of the industry’s broadest, freshest crossover and SUV lineup since 2015. The all-new contemporary midsize SUV is rooted in attention-grabbing design with seamlessly integrated customer-focused technologies and superb functionality.
“Chevrolet has been at the forefront of each of the major automotive industry trends by anticipating consumer demand and delivering innovative products like Bolt EV, Colorado and Trax,” said Alan Batey, president of GM North America and head of Global Chevrolet. “The introduction of the all-new Blazer builds on that momentum and further strengthens the most comprehensive lineup of crossovers and SUVs on the market today.”
Slotting between the Equinox and Traverse, the 2019 Blazer will offer unique design elements on each model, appealing to customers seeking distinctive styling and outstanding utility.
Highlights include:
Bold styling that features a strong grille and muscular proportions. Driver-centric interior and distinctive looks on all models. Model range includes sporty RS and up-level Premier models. Five-passenger seating with up to 64.2 cubic feet (1,818 L) of max cargo space with second-row seats folded flat. Adjustable sliding rear seat. Available Chevy-first cargo management system with a rail system and cargo fence. Available panoramic dual-pane power sunroof. Suite of available active safety features. Standard 2.5L I-4 and available 3.6L V-6 engines, each backed by a nine-speed automatic transmission. Advanced twin-clutch AWD system available. 4,500 pounds (2,041 kg) estimated max trailering with the available 3.6L V-61. Available Hitch View feature that helps the driver align the hitch with the trailer. An SUV With Attitude
The 2019 Blazer is the boldest, most progressive expression of the Chevrolet crossover design theme. A wide stance, tight proportions, a high beltline and dramatic sculpting give it a toned, athletic appearance from all angles.
“The Blazer has attitude,” said John Cafaro, executive director, Global Chevrolet Design. “It looks commanding on the road, while fulfilling the promise of versatility at the heart of every Chevy crossover and SUV.” 
Each model in the lineup offers a unique look with distinct styling to suit different customers’ tastes, including unique grille appearances, additional bright chrome on the Premier trim and a more sinister-looking, blacked-out appearance for the Blazer RS.
A powerful front end featuring a strong grille, athletic hood lines and low-placed HID headlamps distinguishes all models. The design also features a distinctive lighting execution that separates the headlamps and LED daytime running lamps.
Long, lean and sculpted body sides lead to a rear end highlighted by LED-illuminated Chevy-signature dual-element taillamps, dual exhaust outlets and an integrated tailgate spoiler. The Blazer also offers a range of stylish wheels, starting with standard 18-inch aluminum rims and expanding to available 21-inch wheels on the RS and Premier.
The Blazer’s cabin echoes the bold exterior theme with sporty good looks. The design emphasizes space, craftsmanship and customer personalization, with a wide range of interior styling choices for the different models, achieved through several color and trim choices. Sporty details include a padded knee area, round air vents and grab handles on the doors.
The new Blazer also offers a Chevrolet-first Cargo Management System, standard on RS and Premier models. It features a rail system and cargo fence to help secure smaller items by dividing the cargo area.
Seamless Technology and Connectivity
The 2019 Blazer is designed to offer occupants seamless connectivity, intuitive controls and a host of convenience features that help make the drive more comfortable.
Features include:
Hitch Guidance — Available on models with the 3.6L engine, it aids in aligning the Blazer’s hitch to a trailer by showing the center line on the rear-vision camera. Hitch View — This available feature complements Hitch Guidance by showing a top-down view, making it easier to hitch a trailer without a second person to assist. Electronic-locking glove box — A Chevy first, it offers added storage security, and is roomy enough to fit a small handbag. The glove box is locked with the vehicle’s Valet Mode, which is accessible through the Settings menu. Automatic heated steering wheel and automatic heated/ventilated front seats — These available features work with Remote Start and/or automatic climate control to automatically adjust temperature to help maintain comfort. Comfort-open windows — Activated by the key fob, this feature allows all windows to roll down to help heat escape before occupants enter the vehicle. Heated outboard rear seats are available on RS and standard on Premier. Adaptive Cruise Control and Rear Camera Mirror are available on RS and Premier2. Hands-free power liftgate with Bowtie logo projection is standard on RS and Premier. Wireless charging and six USB ports are available. When it comes to connectivity, an 8-inch-diagonal color touchscreen running Chevrolet Infotainment 3 is standard, along with 4G LTE Wi-Fi (with 1-month/3GB data trial)3 and Apple CarPlay4 and Android Auto5 compatibility. Performance and Capability
The new Blazer is powered by a standard 2.5L I-4 engine rated at 193 hp (143 kW) and 188 lb-ft of torque (255 Nm). A 3.6L V-6 is also available, offering 305 hp (227 kW) and 269 lb-ft of torque (365 Nm).
Both direct-injected engines feature intelligent stop/start technology that seamlessly shuts off the engine when power is not needed, based on a variety of driving factors, and both are paired with a nine-speed automatic transmission.
“The Chevrolet Blazer is more than just good looks,” said Waqar Hashim, Blazer chief engineer. “Both the Ecotec® 2.5L four-cylinder engine and 3.6L V-6 engine are paired to Chevrolet’s nine-speed automatic transmission, providing drivers a great balance between performance and efficiency.”
Traction Select is standard on all models and allows the driver to make real-time adjustments to the vehicle’s driving mode to account for varying road conditions. On AWD models, it also allows the system to be completely disconnected from the rear axle, meaning drivers can opt to have their vehicle operate in FWD when AWD capability is not necessary.
RS and Premier models offer a more sophisticated twin-clutch AWD technology that helps optimize traction for every condition. It provides excellent performance in wet, snowy and icy conditions, while also providing enhanced stability in dry weather.
Available Early 2019
The Chevrolet Blazer will arrive at U.S. dealerships in early 2019. Additional details and pricing will be announced closer to the start of production.
  • Not your father's blazer

When we drove the Mazda CX-5 towards the end of last year, we found ourselves wishing that either the long-delayed turbodiesel or possibly the 2.5: turbo-four from the CX-9 would grace the engine. The 2.5L four-cylinder does ok around town, but really struggles when more speed is needed. It seems our wish could be coming true.
The Truth About Cars obtained a certification document from the California Air Resources Board for the turbocharged 2.5L four-cylinder. In the document, it lists the 2019 CX-9 and CX-5 offering this engine. It would give the CX-5 a nice power boost as the turbo-four produces 227 horsepower (250 horsepower on premium fuel) and 310 pound-feet of torque.
Mazda declined to comment when asked about the document.
We're guessing that Mazda could debut the turbo engine in the CX-5 at the LA Auto Show in November.
Source: The Truth About Cars
  • And we're not talking turbodiesel

The project of a trade war between the U.S. and China (along with the European Union) has many automakers on edge. Some are beginning to speak out about the possible dangers it may bring.
Mercedes-Benz's parent company, Diamler AG announced yesterday that its full-year earnings will be slightly lower than last year. Their reasoning comes down to consumers in China buying fewer SUVs that are imported from the U.S. Most of Mercedes-Benz SUVs are built in Alabama.
“Remember, for those following from a Trump/global free trade perspective, this is now a German car maker, warning on the profits coming from their Alabama-made SUVs, which are then sold/exported into China –- a complicated situation indeed!!” wrote Evercore ISI analyst Arndt Ellinghorst.
According to Bloomberg, shares in Diamler dropped 4.4 percent on this announcement.
Meanwhile, Volvo Cars CEO Hakan Samuelsson said the trade war could affect plans in the U.S. Speaking at the opening of the Swedish automaker's new assembly plant in South Carolina, Samuelsson told Bloomberg that Volvo would have to limit the number of models it sells due to threat of a 25 percent tariff on imported vehicles.
“I would have less models to choose from and they would cost more -- that would be the consequence. Shorter menu and higher prices -- not a very good restaurant,” said Samuelsson.
The factory in South Carolina will provide a small relief for Volvo if tariffs do go into place. Small is the key word as LMC Automotive estimates 87 percent of the vehicles Volvo sells in the U.S. next year will come from other places - Sweden and China.
Samuelsson also warned that the trade dispute could mess up plans to create up to 4,000 new jobs at the new plant.
"If you have trade barriers and restrictions, we cannot create as many jobs as we are planning to," explained Samuelsson.
"We want to export and if suddenly China and Europe have very high barriers, it would be impossible. Then you have to build the cars there. And then all cars will be more expensive, you have to invest more tooling and have every model in every country. That's against all the logic of modern economies that trade with each other."
Source: Bloomberg, (2), Reuters
  • One Predicts a Hit on Profits, While the Other Says it will threaten jobs

The 2019 Volvo S60 marks a few milestones for the Swedish automaker. For one, Volvo can finally say goodbye to the final remnants of its Ford ownership. The S60 is also the first model for the brand to be built in the U.S. at a new plant in South Carolina. It will also be the first Volvo to not offer a diesel engine.
At first glance, the S60 looks almost the same as the larger S90 sedan. But get a bit closer and there are some major differences. For example, the 'Thor's Hammer' daytime running lights are closer to the grille than on the S90. The bumpers are much more aggressive and the doors feature deeper stamps and creases. Compared to the outgoing S60, the new model is slightly longer. Most of that increase goes to those sitting in the backseat. The interior is the same as you'll find in the V60 and XC60, complete with the 9-inch Sensus infotainment system. 
Three engines will be on offer for the U.S.
T5: Turbocharged 2.0L Four-Cylinder, 250 horsepower, Front-Wheel Drive T6: Twincharged 2.0L Four-Cylinder, 300 horsepower, All-Wheel Drive T8 Twin-Engine: Twincharged 2.0L Four-Cylinder with Hybrid System, 400 horsepower, All-Wheel Drive All engines will come paired with an eight-speed automatic. A T6 Twin-Engine with 340 horsepower will be available for other markets.
Those wanting a bit more power only need to turn to the Polestar Engineered model that adds 15 horsepower, along with changes to the suspension and brakes.
Being a Volvo, the 2019 S60 has a long list of safety features including automatic emergency braking, run-off road mitigation, and oncoming lane mitigation. Volvo's Pilot Assist that assists a driver with steering, acceleration, and braking on well-marked roads will be an option.
Pricing for the 2019 Volvo S60 is as followed,
T5 Momentum: $36,795 T5 R-Design: $42,895 T5 Inscription: $43,895 T6 Momentum: $41,295 T6 R-Design: $46,395 T6 Inscription: $48,395 T8 R-Design: $55,395 T8 Inscription: $55,395 All prices include a $995 destination charge.
Those wanting to do a Care by Volvo subscription will have the choice of three models,
S60 T6 Momentum: $755 per month S60 T6 R-Design: $855 per month S60 T8 Polestar: To be announced at a later date. It needs to be noted that the T8 Polestar Engineered model will only be available through Care by Volvo for now. 
The order books are open right now for most of the S60 models; the T8 Polestar will be available to order starting June 28th. Production is expected to begin in the fall.
Source: Volvo
Volvo Cars launch new S60 sports sedan – the first Volvo car made in the USA
Volvo Cars, the premium car maker, today revealed the new S60 luxury sedan at the company’s first American manufacturing plant outside Charleston, South Carolina.
 
The new South Carolina plant is officially inaugurated today. The combined car launch and factory opening reinforce Volvo Cars’ commitment to the US, an important market for the company and its new sedan. The new S60 is the first Volvo car made in the United States.
 
“The new S60 is one of the most exciting Volvo cars we’ve ever made,” said Håkan Samuelsson, president and chief executive of Volvo Cars. “It is a true driver’s car that gives us a strong position in the US and China sedan markets, creating more growth opportunities for Volvo Cars.”
 
The new S60 is the first Volvo car to be sold without a diesel engine, signalling the company’s industry-leading commitment to electrification and a long-term future beyond the traditional combustion engine. In 2017 Volvo Cars was the first global car maker to announce its strategy that from 2019 all new models will be electrified.
 
The award-winning turbo charged and supercharged T8 Twin Engine Plug-In Hybrid will be available in the new S60, delivering 313 horsepower with a rear electric motor adding 87 horsepower for a combined power output of 400 horsepower.  The T5 FWD and T6 AWD will also be available. The T5 FWD, T6 AWD and T8 Twin Engine Plug-In Hybrid will carry a MSRP of $35,800, $40,300 and $54,400 respectively.
 
The new S60 is available via traditional purchase, lease and Care by Volvo, a premium subscription service, which offers car access with no down payment via a monthly flat rate. Care by Volvo makes having a car as easy as having a mobile phone. A well-equipped S60 T6 AWD Momentum will be available for $775 a month through the program and the S60 T6 AWD R-Design for $850 a month. Reservations can be made online today at volvocars.com/us. 
  
The new S60 shares Volvo Cars’ own Scalable Product Architecture (SPA) platform, safety technology and infotainment system with the new V60 premium mid-size wagon, launched earlier this year, as well as the top-of-the-line 90 Series cars and award-winning XC60, all of which have achieved industry-leading safety ratings. This makes the new S60 one of the safest cars on the road.
 
The City Safety with Autobrake technology assists the driver in avoiding potential collisions, and is the only system on the market to recognize pedestrians, cyclists and large animals. In a world first for the mid-size sedan segment, City Safety now also engages auto braking to mitigate oncoming collisions.
 
The optional Pilot Assist system – which supports the driver with steering, acceleration and braking on well-marked roads up to 80 mph – has been upgraded with improved cornering performance. The S60 also includes Run-off Road Mitigation, Oncoming Lane Mitigation and other steering assistance systems. The optional Cross Traffic Alert with autobrake further enhances safety for people inside and outside the car.
 
Volvo Cars’ Sensus Connect infotainment system is fully compatible with Apple CarPlay, Android Auto and 4G standard, and keeps drivers connected at all times. The intuitive control is a tablet-style touch screen interface that combines car functions, navigation, connected services and in-car entertainment apps.
 
The new S60 will also be offered with a Polestar Engineered trim level – developed by Volvo Cars’ electric performance arm, Polestar.
 
Polestar Engineered is only available on the T8 Twin Engine plug-in hybrid and is a complete offer with upgrades to the exterior and interior design, along with the car’s wheels, brakes, suspension and engine control unit, boosting the S60 T8 combined output to 415hp.  A limited volume of this variant will be available exclusively through the Care by Volvo app on June 28.
  • Built in the USA

For the past few months, we have been hearing about some key changes to the Mazda MX-5 Miata; more power from the four-cylinder engine, new safety features, and a telescoping steering wheel. Mazda has been using the "can't comment at this time" when asked about these changes. Today, the Japanese automaker finally confirmed the changes.
Under the hood lies a reworked 2.0L Skyactiv-G producing 181 horsepower and 151 pound-feet of torque - up 26 and 3 respectively. A higher redline of 7,500 rpm complements the added power. To pull this off, Mazda made a number of changes to the engine which include,
Lighter pistons and connecting rods Reconfigured intake ports New fuel injectors New exhaust system Mazda has also fitted a higher final drive ratio (3.583 vs. 3.454), which should make it slightly quicker off the line.
There is also more safety tech for the 2019 MX-5 Miata. All models get a backup camera as standard and higher trim levels boast traffic sign recognition and  Smart City Brake Support.
Other changes for the 2019 MX-5 include,
Optional brown canvas soft top Redesigned 17-inch wheels Telescoping steering wheel Mazda hasn't announced pricing on the 2019 MX-5 Miata, but does say it will arrive at dealers later this fall.
Source: Mazda
  • Ooh, more horsepower

Since 2014, Fiat Chrysler Automobiles CEO Sergio Marchionne proclaimed that Jeep needed a three-row luxury SUV to better compete with the likes of the Cadillac Escalade and Lincoln Navigator. But this SUV, known as the Grand Wagoneer hasn't materialized. Numerous delays and debates about the design has caused the launch to be pushed time and time again. These delays have a number of dealers concerned that Jeep may miss its opportunity with this new model.
"I think our window of opportunity is closing. We could have killed with [the Grand Wagoneer] if it had been available when they first told us about it, but it's a much tougher sell with interest rates and gas prices going up," said an unnamed FCA dealer to Automotive News.
John Murphy, research analyst at Bank of America Merrill Lynch said last week at a meeting of the Automotive Press Association that the "Goldilocks" era in auto retailing was coming to a close. Murphy said the next five years would be tough on auto sales due to a number of factors, especially for those trying to sell high-end models.
Higher interest rates Increasing gas prices Raw materials becoming more expensive Increasing competition in the light-truck sector The current plan is to launch the Grand Wagoneer in 2019, but production could be pushed back till late in the year or even into 2020. This is due to FCA's plan to keep building the current Ram 1500 at their Warren Truck Plant until the end of year. But depending on demand, this could extend production into 2019, pushing back the time needed to retool the plant for the Grand Wagoneer.
Source: Automotive News (Subscription Required)
  • Dealers: Where's that Grand Wagoneer?

The National Highway Traffic Safety Administration has sent a cease-and-desist letter to Dolder, Falco and Reese Partners LLC, the company behind an aftermarket device called the Autopilot Buddy.
Autopilot Buddy is a small, weighted device that clips onto either side of the wheel to place minor amounts of torque. This fools the Autopilot system into thinking that a driver has their hands on the wheel. The company markets the device as "nag reduction device", reducing the amount of warnings to tell driver to keep their hands on the wheel.
The company has a disclaimer on Autopilot Buddy that states,
This would be ok if a video demonstrating the product didn't appear to be on a public road of sorts. 
“A product intended to circumvent motor vehicle safety and driver attentiveness is unacceptable. By preventing the safety system from warning the driver to return their hands to the wheel, this product disables an important safeguard, and could put customers and other road users at risk,” said NHTSA Deputy Administrator Heidi King in a statement.
NHTSA has given Dolder, Falco and Reese Partners LLC till June 29th to respond and certify to NHTSA "that all U.S. marketing, sales, and distribution of the Autopilot Buddy has ended."
Source: Roadshow, NHTSA
  • This was bound to happen sooner or later

Lincoln has been slowing transitioning their nomenclature system from three letter (MK_) to actual names - MKX to Nautilus for example. The next-generation MKC, due in 2020 as a 2021 model will see its name change to Corsair.
Automotive News reports the name was announced last month to Ford and Lincoln dealers at a conference held in Orlando according to those who attended the meeting. Corsair, the name of a pirate ship and a World War II fighter plane first came to light last year when Ford filed a trademark on. The name was last used on a badge engineered model between Ford and Nissan for Australia.
Sources at Ford said the name isn't final and could change before the model goes into production.
Dealers at the meeting were also shown the next-generation Ford Escape, Explorer, Mach 1 EV crossover, and the Lincoln Continental with suicide doors.
Source: Automotive News (Subscription Required)
  • We applaud the return of actual names

Early this morning, German authorities arrested Audi CEO Rupert Stadler at his home in Ingolstadt. Prosecutors said in a statement that Stadler's arrest is due to concerns about evidence tampering. 
“There were clear signs that there was to be an effort to influence people and other suspects. Therefore we issued an immediate arrest warrant,” Stephan Necknig, a spokesman for the Munich prosecutor’s office to German Tabloid Bild.
The arrest of Stadler comes a week after prosecutors accused him of fraud and false advertising. Stadler and Audi's head of procurement, Bernd Martens had their homes raided by prosecutors this past week as well. According to Bloomberg, Stadler is willing to be questioned later this week and his lawyers aren't challenging the arrest at the moment.
The New York Times reports that Volkswagen's supervisory board has been holding meetings today to decide on an interim replacement for Stadler. In a statement, Audi said "For Mr. Stadler, the presumption of innocence continues to apply."
Stadler becomes the highest-profile employee at the Volkswagen group to be arrested in connection to the diesel emission scandal.
Source: Bloomberg (Subscription Required), New York Times, Reuters
  • Becomes the highest-profile person to be arrested in the diesel emission scandal

After 20 years since it departed, the 8-Series is making a comeback to the BMW lineup.
The design is more dramatic than the 6-Series coupe with a long front end, "double-bubble" roof contouring, and interesting shape for the trunk lid. Inside, the center stack is oriented to the driver to have controls within easy reach. A 10.3-inch digital instrument panel, and a 12.3-inch infotainment system comes standard. A set of M sport seats are upholstered in Merino leather.
At launch, BMW will only offer the M850i xDrive for the U.S. It packs a brand new turbocharged 4.4L V8 producing 523 horsepower and 553 pound-feet of torque. An eight-speed automatic routes power to all four wheels. BMW quotes a 0-60 mph time of 3.6 seconds and a top speed limited to 155 mph. Expect other powertrains to be announced at a later date.
For the suspension, BMW utilizes a double-wishbone setup up front and a five-link axle in the rear to make the coupe feel more agile. A set adaptive dampers can adjust the overall firmness automatically. The M850i xDrive will also come with a rear-axle steering system that turns the rear wheels up to 2.5-degrees to reduce turning radius at lower speeds, while improving cornering at higher speeds.
The 2019 M850i xDrive arrives at BMW dealers this fall.
Source: BMW
The All-New 2019 BMW 8 Series Coupe.
The return of the iconic BMW 8 Series after 20 years. BMW M850i xDrive launch model with 523 hp and 553 lb-ft torque. 0-60 mph in 3.6 seconds and a limited top speed of 155 mph. Optional Carbon Fiber roof. Pricing will be released closer to the on sale date in Fall of 2018. Woodcliff Lake, NJ – June 15, 2018…Today, BMW introduced the all-new 2019 BMW 8 Series Coupe. Initially available as the BMW M850i xDrive variant, the coupe makes its return to the U.S. after 20 years and writes a new chapter in the luxury sports coupe’s story of outstanding performance, beautiful design and state of the art technology.
The new luxury sports coupe will be built at the BMW Dingolfing plant in Germany, home to BMW 7 Series sedan production. The number ‘8’ in the model name indicates the new vehicle’s high-ranking status within BMW’s product range. As in the past with the BMW Z8 and with the current BMW i8, it is reserved for exceptionally sporty cars that stir the emotions. The all-new BMW 8 Series Coupe is the first key component of the Munich-based brand’s luxury segment model offensive.
The directive for the all-new BMW 8 Series Coupe’s design was to provide a thrilling driving experience. Body, powertrain and suspension were honed to achieve the agility, precision and poise expected of a top-class luxury sports coupe. The all-new BMW 8 Series Coupe was developed in parallel to the BMW M8 GTE race car, which has already proven its potential in the 2018 FIA World Endurance Championship long-distance races and in the 2018 IMSA WeatherTech SportsCar Championship.
Exterior design: new design language gives sporting appeal a new face.
The exterior design of the all-new BMW 8 Series Coupe exudes a very modern form of sporting appeal beautifully blended with an air of exclusiveness and sensual allure. The production model lives up to the expectations engendered by the BMW Concept 8 Series first unveiled at the Concorso d’Eleganza Villa d’Este in 2017. Its unique aura is the result of a new styling language focusing on modernity and emotional engagement.
The car’s low-slung design, an elongated silhouette with a slim window pillars, a roofline with a distinctive “double-bubble” contouring, a long wheelbase and wide track are the defining elements of the all-new BMW 8 Series Coupe’s proportions.
Sculptured design with signature new headlights.
The luxury sports coupe’s promise of performance is visualized in dramatic effect by the elaborate, jutting design of the front of the vehicle, with large air intakes assuming an even more imposing appearance on the BMW M850i xDrive Coupe with the optional M Sport package. The BMW kidney grill showcases its increased proportions and features a hexagonal outline that widens towards the bottom and a single-piece surround that encompasses its various elements. The all-new BMW 8 Series Coupe comes features standard Full LED headlights with BMW LaserLight technology that are the slimmest headlights of any BMW model to date. Both light tubes are used to generate the daytime driving lights as well as the low and high beam, thereby creating the signature brand look at all times.
The greenhouse is sharply tapered at the rear, accentuating the muscular shoulder line. The elongated quarter windows terminate in a very tightly-angled version of the iconic Hofmeister kink “counter-swing”. The long, heavily raked rear window is a classic design feature of high performance luxury sports coupes of yesterday.
The rear end is composed of sculptured, emotive surfaces that emphasize the car’s width and low center of gravity. The slender all-LED rear light clusters extend deep into the flanks and add to the effect. The taillights light up uniformly in a distinctive ‘L’ shape. Twin exhaust tailpipes with a trapezoidal contour are positioned either side of the rear lower section.
Precise details optimize aerodynamics and weight.
An almost fully covered underbody, active air flap control with adjustable kidney grille slats and Air Curtains including Air Breathers help to reduce the aerodynamic drag of the all-new BMW 8 Series Coupe. Narrow exterior mirror bases, mounted directly on the side window weather strips help smooth the airflow.
The roof of the all-new BMW 8 Series Coupe mimics the design of the traditional sports coupes by featuring a central cut-out that recalls the “double-bubble” styling of classic racing cars.
This distinctive contouring is also available on the optional carbon-fiber-reinforced plastic (CFRP) roof which lowers the center of gravity enhancing the luxury sports coupe’s agility. Further weight savings can be achieved with the optional Carbon Package comprising air intake bars, exterior mirror caps, a rear spoiler and a rear diffuser insert all made from CFRP.
Driver-focused interior design
The interior has been designed to help the driver focus on the road ahead and enjoy the experience of driving. The car’s wide center console rises up towards the instrument panel at the front, separating the driver and front passenger areas. This center space encompasses the audio control unit and its function buttons, the air conditioning control panel and air vents as well as the freestanding and frameless Control Display, all arranged above each other in a clear, horizontally partitioned structure.
clear arrangement of the controls helps the driver to focus on what’s happening ahead. Apart from the gear selector and the iDrive Controller, the center console also accommodates the Driving Experience Control switch and the engine start/stop button, all arranged within a newly designed function cluster with active haptic feedback. The control unit for the light functions is new and now consists of buttons positioned at the bottom of the instrument panel between the steering wheel and the driver’s door. A leather M sports steering wheel with multifunction buttons and shift paddles for manual gear selection is standard.
Merino Individual Leather upholstery and folding rear seats as standard.
The newly developed sports seats offer high levels of long-distance comfort and excellent lateral support. The headrests are integrated into the backrests and can be adjusted for both height and fore/aft position. A semi-electric folding function has been included for the front seat backrests, which is activated by using a high-quality leather strap located on each seatback to facilitate convenient entry and exit for the rear passengers.
The sports seats are upholstered in standard premium Merino Individual leather with extended leather appointments. Decorative stitching in a contrasting color accentuates both the sporting contours and the rear seats’ styling as individual seats.
There are large door pockets, a roomy glove compartment, two cup-holders under the center console’s trim finisher and a large storage compartment under the armrest’s longitudinally divided covers for stowing travel accessories, beverages and other items. Thanks to the low seating position of both rear seats, it has been possible to design the head restraints as an integral part of the backrests. The rear backrest in the all-new BMW 8 Series Coupe has a 50:50 split design. The backrest sections can be folded down either individually or together to further increase cargo capacity. The folding mechanism is released by means of levers inside the cargo compartment. Automatic trunk lid operation is a standard feature on the all-new BMW 8 Series Coupe, while the Comfort Access option permits hands-free opening and closing of the trunk lid.
BMW M Performance model and M Sport package with exclusive features.
The standard specification for the new BMW M850i xDrive Coupe contains exclusive design features and options to enhance the driving experience. In addition to multifunction seats and the M leather steering wheel, there is an anthracite BMW Individual headliner, M pedals, M driver’s footrest and special floor mats to imbue the cabin with a distinctly sporty flair. The illuminated door sills and the display in the instrument cluster bear the BMW M Performance Automobile model badge or the M logo respectively.
Premium options for sheer luxury.
The luxurious side of the all-new BMW 8 Series Coupe’s character is shown with the help of a wide array of distinctive optional extras. Newly designed climate seats for driver and front passenger are available as an upgrade to the optional heated seats. For the first time, the cooled air is drawn in from the interior then guided along the body to the seats’ built-in fans for particularly effective temperature control of the seat cushions and backrests.
The standard ambient light feature emphasizes the forward-pointing lines inside the car to striking effect. Indirect illumination of the contour lines running along the center console and the door shoulders using precisely positioned LED optical fibers creates an exclusive mood. The color of the light can be changed via the iDrive menu. In addition to this, the Dynamic interior light function emits pulsating light signals in specific situations. These signals appear on the inner panelling of an open door when the engine is running and on the instrument panel in response to an incoming phone call.
The standard audio system comprises eleven speakers and a digital amplifier, while the optional Harman Kardon Surround Sound System features 16 speakers. The pinnacle of the audio line-up is without doubt the optional Bowers & Wilkins Diamond Surround Sound System. The unrivalled Diamond loudspeaker technology, fully active 16-channel amplifier with an output of 1,375 watts, dynamic equalizing and 16 partly illuminated speakers combine together to deliver a beautifully precise and multifaceted acoustic experience whose pristine quality can be enjoyed in equal measure from all seats in the new BMW 8 Series Coupe.
The optional glass applications for selected controls add both visual and tactile highlights to the interior design. This exclusive design feature adorns the gear selector, the iDrive Controller, the start/stop button and the volume control for the audio system. An illuminated ‘8’ can be seen through the glass surface of the gear selector.
The BMW M Performance model that will be available from launch provides a particularly impressive demonstration of the all-new BMW 8 Series Coupe’s sporting essence. Under the hood lies a 523 hp BMW TwinPower Turbo V8 engine that has undergone extensive upgrades and refinement. It serves up an intense form of the unmistakable power delivery and acoustics of eight-cylinder units and is every bit as captivating and emotionally thrilling as the car it powers.
Power is transferred to the wheels via the latest-generation eight-speed Steptronic Sport transmission that boasts a wider gear ratio spread, even sportier gear shifts and can be operated by means of shift paddles on the steering wheel. Completing the all-round package for an engaging driving experience is the BMW xDrive intelligent all-wheel-drive system, which is fitted in a newly improved version that has been tuned for this specific model. The rear-wheel bias of the xDrive system and the rear differential lock fitted as standard on the all-new BMW M850i xDrive Coupe ensure maximum agility and precision when the car’s sporting capabilities are being put to the test.
New V8 engine with incredible power and acoustics.
The launch of the all-new BMW M850i xDrive Coupe also marks the premiere of a new BMW TwinPower Turbo V8 engine. The latest generation of the 4.4-liter eight-cylinder engine has been radically revised with numerous detailed improvements. Two twin-scroll turbochargers with charge air cooling located within the V-shaped space between the cylinder banks, High Precision Injection, VALVETRONIC fully variable valve control and Double-VANOS variable camshaft timing all form part of the M Performance TwinPower Turbo technology, whose extensive overhaul has given a substantial boost to maximum power, torque and efficiency.
The new V8 engine serves up an enthralling soundtrack, which is enhanced by the standard flap-controlled sports exhaust system. It boasts a wonderfully versatile character that can also adapt itself to effortlessly relaxed cruising. The Driving Experience Control switch can be used to activate both extremely sporty and distinctly comfort-oriented powertrain settings. In the SPORT and SPORT+ modes, accelerator response as well as the V8 engine’s power delivery and acoustics – which take on a particularly distinctive note in the SPORT+ setting – are all configured for an exhilarating driving experience.
A new aluminium alloy has been used to increase the strength of the engine block. The wire-arc sprayed iron coating for the cylinder walls serves to reduce frictional losses. Reinforced, Grafal-coated pistons and optimized piston rings are designed to endure the stress on the crank drive that comes with the extra output and torque. To enhance engine smoothness, torsional vibration is minimized with the help of a viscous damper on the crankshaft.
Optimized power delivery, efficiency and emissions performance.
To achieve rapid combustion, the intake ports have been optimized for higher flow. The enlarged twin-scroll turbochargers and the variable valve and camshaft timing enable throttle losses during the gas-exchange cycle to be eliminated as far as possible and allow effective use of exhaust gas recirculation for lowering fuel consumption.
Electrically-controlled wastegate actuators are used to ensure an extremely quick build-up of boost pressure, while electric blow-off valves are integrated into the compressor housing to enhance the turbocharger sound during boost pressure release while at the same time as keeping emissions as low as possible in all operating conditions. The air intake manifold has been redesigned and a connection between the air ducts for both cylinder banks ensures even pulsation during gas exchange, resulting in higher torque at lower engine speeds.
The multi-hole fuel injectors are positioned centrally between the valves and spray fuel at a maximum pressure that has been increased from 2,900 psi to 5,076 psi. This optimizes both the metering of the fuel and the engine’s emissions performance. The BMW TwinPower Turbo V8 engine also takes advantage of a new ignition system and engine management.
Thermal shielding and the cooling circulation system have both undergone extensive modification. An upstream coolant radiator helps meet the high demands on the engine’s temperature management during extremely spirited driving.
The new BMW TwinPower Turbo V8 engine now generates 523 hp between 5,500 and 6,000 rpm and 553 lb-ft of torque from 1,800 to 4,600 rpm.
Eight-speed Steptronic Sport transmission with wider ratios and sportier gear shifts.
The latest improved version of the Sport automatic transmission features a weight-reducing design, a newly developed controller and a wider gear ratio spread. As a result, it is possible to achieve efficiency gains with reduced engine speeds, particularly when driving in higher gears. At the same time, the eight-speed Steptronic Sport transmission now shifts gear more sharply courtesy of optimized hydraulics control. A new generation of torsion dampers that reduce rotational forces within the powertrain help improve both driving comfort and shift smoothness. Integral twin-damper systems for isolating vibrations reduce the degree of slip at the torque converter lock-up clutch.
Shift paddles on the steering wheel are included as standard for manual gear selection, while a Launch Control function allows for accelerating from a standing start with maximum available traction.
Intelligent networking increases performance and efficiency.
The eight-speed Steptronic Sport transmission’s controller is able to adapt the shift parameters to the current driving situation by means of intelligent networking with the standard Navigation system, enabling it to take the planned route into account. Navigation data is used to downshift early, for example, when approaching an intersection in order to use engine braking to slow the car down. Likewise, the intelligent controller is able to avoid unnecessary gear shifts between two corners that follow in quick succession, making it possible to drive through at a quicker pace.
Intelligent networking increases the efficiency of the drive system in the all-new BMW 8 Series Coupe by allowing Auto Start Stop operation to adapt to suit the specific situation based on data supplied by the navigation system as well as by the cameras and radar sensors of the optional driver assistance systems. In this way, inefficient engine shutdown – for example when stopping briefly at junctions with yield signs – can be prevented. The movement of vehicles ahead is registered in order to determine the ideal moment for stopping and starting the engine.
Intelligent networking also boosts the efficiency-enhancing effect of the coasting function. When travelling at speeds between 9 – 99 mph, it ensures that the powertrain is decoupled as soon as the driver lifts off the accelerator. The vehicle can then simply coast along at idling speed and with minimized fuel consumption. This function is available with the Driving Experience Control switch set to ECO Pro mode. The switch to this “sail” mode only takes place in driving situations in which it appears worthwhile and which doesn’t compromise comfort or performance. If the accelerator is released very suddenly for instance, the powertrain stays connected in order to use the engine’s drag torque to decelerate.
Swift and precise power transfer: BMW xDrive with electronically controlled differential lock.
The BMW xDrive intelligent all-wheel-drive system has been improved for more efficient operation. With its rapid, precise and fully variable distribution of drive torque between the front and rear wheels, it maximizes traction and handling stability not just when driving in adverse road conditions, but in performance driving situations as well. Power is split in accordance with demands at all times using an electronically controlled multi-plate clutch that is networked with the powertrain and chassis systems. This results in extremely quick and exact response to any change in the driving situation.
To increase the system’s efficiency, all of the drive torque is directed to the rear wheels in situations when all-wheel drive is not needed. The xDrive system’s rear-biased set-up guarantees a driving experience for which BMW sports cars are renowned. The fact that the all-wheel-drive system has been specifically designed for performance handling is especially noticeable in the SPORT and SPORT+ modes selected via the Driving Experience Control switch.
Governed by the Driving Stability Control (DSC) system, the locking function for the standard electronically controlled rear differential improves traction and power transmission when driving on road surfaces offering differing levels of grip for the left and right rear wheels by preventing a wheel from spinning when traction is limited. The locking effect produced by the electric motor allows the drive torque to be redirected from the faster turning to the slower turning tire. This combines with the intelligent all-wheel drive and the standard Integral Active Steering to give the car all the right tools for excellent handling and remarkably agility in all driving situations.
Suspension technology sharpened with racing know-how.
The suspension technology developed for the all-new BMW 8 Series Coupe consists of a double-wishbone front axle and a five-link rear axle as well as electromechanical steering and an exceptionally powerful braking system developed exclusively for this new model. The racing know-how of BMW M GmbH was used for detailed modifications and enhancements to the overall suspension set-up. Torsion struts on the front axle and a load-bearing strut incorporated on the rear axle optimize stiffness and the connection of suspension components to the chassis. Independent rubber bearings – which increase camber stiffness – and additional damping plates at the rear axle further enhance the suspension’s baseline set-up. Special wheel hubs and wishbones allow camber values on both axles to be raised as far as possible. This significantly increases the car’s ability to put down power through high-speed corners.
The design principle of the double-wishbone front suspension makes it possible to separate steering and damper functions. As a result, high lateral acceleration forces are possible without compromising ride comfort. The car’s steering remains largely unaffected by disruptive forces caused by irregularities in the road surface. Thanks to bi-elastic bushings, the five-link rear axle guarantees precise wheel guidance and the highest degree of directional stability. In addition, effective isolation of the powertrain and suspension improves interior acoustic comfort.
Adaptive M suspension and Integral Active Steering standard.
Standard on the all-new BMW 8 Series Coupe is Adaptive M suspension with electronically controlled dampers. Both compression and rebound are adjusted continuously and independently. This facilitates finely tuned spring and damping responses, providing the driver with only relevant information about the road surface. The extremely stiff suspension springs reduce roll tendency and allow the dampers to stabilize the wheels as much as possible, avoiding traction losses caused by bumps and ruts in the road surface. The electronically controlled dampers respond adaptively to road surface conditions and driving style in order to eliminate undesired vehicle movement. Minor road damage is comfortably filtered out and narrow bumps do not induce unwanted pitching movements.
Damping characteristics can be adjusted via the Driving Experience Control switch. SPORT and SPORT+ modes activate optimal responses for maximum handling. This is noticeably different from the comfort-oriented damper setting in ECO Pro and COMFORT modes.
The standard Integral Active Steering also reduces the car’s turning circle when maneuvering, increases agility at moderate speeds and optimizes stability when changing lanes and cornering at high speeds. The system combines the electromechanical steering of the front wheels (including Servotronic function for speed-sensitive power assistance) and the variable steering ratio in the rear axle steering.
In order to achieve maximum precision during performance cornering, the steering of the all-new BMW 8 Series Coupe becomes more direct with speed. As a result, on winding roads the car feels particularly agile and easy to control. The variable steering ratio also provides additional comfort; allowing the driver to maneuver at low speeds with minimal steering wheel movement and without having to change their grip on the wheel. By contrast, at high speeds, the same steering wheel movement results in decreased steering response, optimizing turn-in precision.
Active steering of the rear wheels by up to 2.5 degrees – thanks to Integral Active Steering – considerably enhances the cornering ability of the all-new BMW 8 Series Coupe. The rear wheels are steered in the opposite direction to the front wheels at speeds up to 45 mph. At higher speeds, the steering angle of the rear wheels matches that of the front wheels, ensuring the car adopts the course determined by the driver quicker and more accurately. At the car’s traction limit, it feeds in a stabilizing steering input to complement the triggered braking intervention.
Activating SPORT or SPORT+ model via the Driving Experience Control switch gives a more direct steering response. At the same time, the maximum speed at which the rear wheels are steered in the opposite direction to the front wheels is increased to 55 mph.
Active roll stabilization
Active roll stabilization is optionally available for the all-new BMW M850i xDrive Coupe and further enhances the car’s sporty handling characteristics. Electric swivel motors on the front and rear anti-roll bars ensure fast and precise compensation for lateral forces during dynamic driving maneuvers. The system is controlled through a constant analysis of vehicle speed, lateral and longitudinal acceleration, steering wheel position, wheel and body acceleration and variation in height levels. In BMW M Performance models, active roll stabilization has an exceptionally sporty set-up and responds adaptively to changing requirements. It optimizes agility and directional stability on turn-in and helps line the car up as neatly as possible for improved acceleration out of corners. The reduced body movement also means that fast evasive maneuvers can be executed with great assurance.
At the opposite end of the spectrum, the system increases comfort when driving straight ahead by decoupling the permanent anti-roll bar connection between the wheels of an axle. By stabilizing the wheel that requires it, the system is extremely effective in counteracting disruptive forces resulting from road surface imperfections on one side of the car.
M Sport braking systems, light-alloy wheels with mixed-size high-performance tires.
Powerful braking characteristics, high thermal stability, fast response and excellent feel characterize the braking system developed for the all-new BMW 8 Series Coupe. Four-piston, fixed-calliper brakes at the front are complemented by single-piston, floating-calliper brakes at the rear. The electronic parking brake – operated by means of a button located on the center console – is integrated into the rear brake callipers. The integration of the braking system and DSC stability control guarantees precise braking response, braking control and brake boosting.
Inner-vented brake discs and model-specific brake pads are featured both at the front and rear. Directional cooling air ducts help to reduce temperatures. The friction rings of each brake disc are rivetedto an aluminum drum. Together with the use of aluminum brake callipers, this BMW-patented construction concept significantly reduces unsprung weight.
The M Sport braking system is recognizable by blue callipers featuring the M logo.
The suspension technology featured in the new BMW M850i xDrive Coupe is oriented towards maximum performance and rounded off by 20-inch M light-alloy wheels. The cast aluminum wheels are standard and come in the exclusive color Frozen Cerium Grey metallic with a high-gloss polished finish on the face. They are fitted with 245/35R20 tires at the front and 275/30R20 tires at the rear. The high-performance tires were developed by the manufacturer specifically for the all-new BMW 8 Series Coupe.
Ideal overall package for maximum performance.
The suspension system for the all-new BMW 8 Series Coupe has been tuned – down to the finest detail – to the powertrain technology. Moreover, all the vehicle dynamics-related systems have been linked up with one another via the high-speed data transfer system called FlexRay to create an overall package geared towards maximum performance.
Constant measurement of the driving situation data by sensors forms the basis for coordinated system responses. Within a split second, the control unit integrated into the braking system and DSC is able to adapt the powertrain and suspension functions to changing situations, such as varying road surface conditions, sudden braking, spontaneous steering maneuvers and extreme acceleration. Here, the steering, four-wheel-drive system, electronically controlled differential lock and active roll stabilization are all employed to assist the stabilizing effect of brake intervention on individual wheels and adjustment of drive torque. A hierarchical control structure guarantees optimal control of the relevant actuators.
For example, to optimize directional stability when braking heavily on road surfaces with varying grip levels under the right and left-hand wheels, a steering impulse can be transmitted to inform the driver of the necessity to adjust their line. With carefully judged steering inputs on the rear axle, it is possible to counteract a tendency to oversteer or understeer. Adjustments by the active roll stabilization system will assist in enhancing stability and agility. Precisely controlled anti-roll bar swivel motors can optimize traction in fast bends. Centrally evaluated data on the driving situation optimizes the efficiency of the BMW xDrive system’s responses.
Optimized weight thanks to intelligent material use.
BMW EfficientLightweight includes the use of an intelligent material mix to optimize both weight and body/suspension rigidity. In addition to the supporting structures at the front and rear of the car, other components such as the roof, doors, hood and the front firewall of the all-new BMW 8 Series Coupe are made of aluminum. The bracing tube for the passenger compartment is made from magnesium and the center tunnel is made of CFRP. The roof and other body aerodynamic components can be specified in CFRP as an option. The front axle is made almost completely from aluminum. The rear axle features a combination of lightweight steel construction with wheel carriers and forged control arms in aluminum.
A particularly wide variety of standard and optionally available driver assistance systems marks the all-new BMW 8 Series Coupe as an extremely advanced model within its segment. The systems really come into their own when driving longer distances by relieving the strain on the driver in monotonous situations, such as traffic jams or slow-moving traffic. They enhance comfort and safety both in urban traffic and on longer trips by providing targeted assistance in complex traffic situations. The driver assistance systems process camera images as well as the data gathered by ultrasonic and radar sensors to monitor the vehicle’s surroundings, to warn of potential hazards and to minimise the risk of an accident with corrective braking or steering inputs. These integral features of the BMW Personal Co?Pilot represent the latest advances on the road to automated driving.
The BMW 8 Series Coupe is equipped with standard Cruise Control with braking function as well as Collision and Pedestrian Warning with City Braking function, the latest version of which alerts the driver when a cyclist is detected. Depending on the situation, the system can bring the vehicle to a halt to either avoid a collision or minimize its consequences.
The all-new BMW 8 Series Coupe can be optionally equipped with Active Cruise Control with Stop & Go function. It can be used at speeds up to 130 mph and maintains the desired speed while taking not only the traffic situation into account, but also the selected distance to vehicles in front. If required, the system is able to brake the car to a stop then pull away again automatically after being stationary for up to 30 seconds, meaning greater comfort in stop-start traffic. Camera images and data from a front radar system are used for distance control.
The speed limits detected by the Speed Limit Info traffic sign recognition system including No Passing Info display can be incorporated into the Active Cruise Control’s automatic regulation of the speed with an adjustment of up to 9 mph. The distance information appears in the standard Head-Up Display. This function helps the driver to keep at a predetermined distance from the vehicle ahead when cruise and distance control are not activated. A warning signal projected onto the windscreen indicates that the gap has fallen below the set distance.
Driving Assistant Professional: the complete package for comfortable and safe driving.
The optional Driving Assistant Professional offers comprehensive assistance for comfortable and safe driving. In addition to Active Cruise Control with Stop & Go function, this complete package also includes the Steering and Lane Control assistant. To allow convenient activation of the two systems, the all-new BMW 8 Series Coupe is fitted with a special button on the standard multifunction steering wheel for switching on the Active Cruise Control and Steering and lane control assistant simultaneously. A mode button can be pressed to switch to using Active Cruise Control on its own.
Another component of the Driving Assistant Professional is the Lane Keeping Assistant with Active Side Collision Protection. This is made up of the Lane Departure Warning and Lane Change Warning systems, which are active from 44 – 130 mph and 12 mph up to top speed respectively and help the driver guide the vehicle back onto the correct path with an active turn of the steering. Besides emitting visual warning signals and causing the steering wheel to vibrate, active side collision protection also uses active steering intervention to help avoid a collision. The Driving Assistant Professional also includes the evasion aid, which now also reacts to pedestrians. The Crossing Traffic Warning – which reduces the danger of a collision when maneuvering forwards towards roads that are obstructed from the driver’s view – now also includes brake intervention.
Perfect for concentrating on the road ahead: the latest-generation Head-Up Display.
The BMW Head-Up Display, which comes as standard in the all-new BMW 8 Series Coupe and projects relevant driving information onto the windscreen in the form of graphics, is another factor in the intensely focused driving experience. The latest generation of the system features a larger projection area, optimized graphics and additional content. The BMW Head-Up Display projects information directly into the driver’s field of vision where it can be assimilated without any need for them to divert their eyes from the road. This includes details of vehicle speed, speed limits and overtaking restrictions, Check Control messages, status indicators and warnings from the assistance systems, detailed route guidance and turn instructions, as well as telephone and entertainment lists. When driving with the Driving Experience Control switch in SPORT or SPORT+ mode, the Head-Up Display also indicates engine speed. Plus, there is a digital Optimum Shift Indicator as an aid for the sports-minded driver in the new BMW 8 Series Coupe.
Another item on the list of optional extras is the BMW Night Vision system comprising pedestrian and animal detection as well as a marker light. It relays a real-time video image to the Control Display showing persons, larger animals and other heat-emitting objects. Any objects detected are additionally illuminated using the headlights’ marker light function.
Easier parking
Drivers of the all-new BMW 8 Series Coupe receive effective assistance when parking and maneuvering. The active Park Distance Control (PDC) with sensors at the front and rear is standard and provides visual and acoustic warnings to avoid colliding with obstacles at the sides or rear of the vehicle. The standard Parking Assistant is able to automatically select suitable parallel parking spaces and maneuver into them. The spaces are identified by ultrasonic sensors as the vehicle drives past. Once it has been activated by simply pressing and holding a button on the center console, the system takes care of controlling the accelerator, brakes and steering as well as changing gear. In addition to this, the system can now be used for automatically maneuvering out of parallel parking spaces too. In order to do this, the driver has to first specify in which direction the parking space is to be exited by switching on the indicators on that side. By reversing and steering, the system then maneuvers the vehicle into a position from which the driver can leave the parking space with the steering turned to the given angle.
The Parking Assistant’s range of functions also includes the Reversing Assistant, which helps the driver when exiting parking spaces and maneuvering within a confined space. The system assumes the task of steering when backing up by tracing the vehicle’s last forward movements in reverse. All the driver has to do is operate the accelerator and brake pedals and monitor the vehicle’s surroundings. A distance of up to 55 yards can be covered in this way at speeds of up to 6 mph. The system is deactivated if either of these values is exceeded.
The included standard camera system is designed to afford drivers a clear all-round view through Rear, Top View, Panorama View and 3D View functions. A 360-degree image of the vehicle and its surroundings is shown on the Control Display from different perspectives. The Remote 3D View function additionally gives drivers the ability to call up a three-dimensional live image of their vehicle and its immediate vicinity on their smartphone.
The all-new BMW 8 Series Coupe comes standard with the BMW Live Cockpit Professional, which combines a new display and control concept and maximum connectivity into a superb all-round package. The latest-generation display and control concept consists of a high-resolution instrument cluster behind the steering wheel with a screen diagonal of 12.3 inches and a 10.25?inch Control Display.
The display and control concept’s most recent incarnation running the new BMW Operating System 7.0 has a cutting-edge, totally digital design and is geared even more closely to the driver’s personal needs with the aim of optimising attention control. The clear presentation and structuring are designed to provide drivers with the appropriate information at the right time, further helped by the customisable and personalised displays. The redesigned graphics display in the instrument cluster now leaves enough room for an excerpt from the navigation map, for instance. The presentation of the main menu on the Control Display can be adapted to the driver’s personal requirements by configuring up to ten pages, each showing two to four tiles with live content. To further enhance the sporty driving experience, information such as the lateral acceleration during high-speed cornering can be displayed. The intuitive multimodal interaction between driver and vehicle has also undergone further improvement and offers a choice of the Control Display’s touchscreen, the proven iDrive Touch Controller, voice control, the standard BMW gesture control or the controls on the steering wheel, depending on the situation.
Further components of the BMW Live Cockpit Professional include an adaptive navigation system, a hard-drive-based multimedia system with 20 GB of memory, two USB ports (type A and type C), plus Bluetooth and WiFi interfaces. The driver can be automatically detected and personal settings activated by using the vehicle key or the BMW Digital Key as well as by selecting a user in the Control Display and entering the correct PIN.
Drivers can benefit to the full from the car’s intelligent connectivity capabilities thanks to its built-in SIM card and the unlimited data volume. Not only does this provide access to vehicle apps such as news, weather, office and online search, it also allows customers to use Intelligent Emergency Call for automatically summoning swift assistance in an emergency and receive regular updates for the navigation system’s maps.
The Connected Package Professional comprising a selection of digital services is also now available. This will make it easier for customers to select highly appealing digital services for their car, either when ordering the new BMW 8 Series Coupe or at a later date. The Connected Package Professional includes Remote Services, Concierge Services as well as Real Time Traffic Information. The various digital services can continue to be booked individually and retrospectively by visiting the ConnectedDrive Store.
BMW Connected: digital services for individual mobility.
BMW Connected is the companion app for BMW drivers. Intelligent connectivity helps users to reach their destination easily and with minimal stress – and not only from within their car; BMW Connected is an all-embracing concept designed to seamlessly connect the driver and their smartphone with their vehicle.
At the heart of it all is the Open Mobility Cloud, which allows the app to connect the car with the customer’s digital devices. These could include the iPhone and Apple Watch, smartphones and smartwatches running the Android operating system, Alexa-compatible smart devices and Google Home. For instance, the BMW Connected app can import appointments and addresses from the customer’s calendar entries straight into the navigation system to begin route guidance. The system calculates the optimum departure time based on real-time traffic information and notifies the driver with a message on their smartphone when it is time to leave. As the vehicle is linked up via the Open Mobility Cloud, it is able to access the calculated route directly when the navigation system starts up.
The latest in key technology: the BMW Digital Key.
The BMW Digital Key employs Near Field Communication (NFC) technology to allow the all-new BMW 8 Series Coupe to be locked and unlocked from a smartphone too, dispensing with the need for a conventional car key. The smartphone simply has to be held up to the door handle to open the vehicle and, once inside, the engine can be started as soon as the phone has been placed in the Wireless Charging or smartphone tray.
Available via the BMW Connected App, the BMW Digital Key offers unrivalled flexibility, as the driver can share it with up to five other people. The BMW Digital Key will initially be available for selected NFC-capable smartphones when it is launched.
Always up to date thanks to Remote Software Upgrade.
The Remote Software Upgrade feature keeps the vehicle up to date with the latest software. All updates can be loaded over the air, similar to smartphones. The upgrades can be loaded onto a smartphone via the BMW Connected app when connected to a domestic Wi-Fi network or imported directly via the BMW’s built-in SIM card, which happens automatically for important vehicle upgrades.
  • Packs 523 horsepower and all-wheel drive

Ford is giving taxi companies two new fuel efficient options for their next vehicle. This week, the automaker unveiled the Fusion Hybrid and Transit Connect diesel taxis.
“Taxi operators want vehicles that are reliable, efficient and comfortable. Transit Connect Taxi and Fusion Hybrid Taxi offer all three with special attention to potentially help lower fuel costs. Plus, Fusion Hybrid underscores our commitment to introduce even more efficient and capable hybrids in the future,” said Imran Jalal, brand and communications manager for Ford fleet marketing.
The Fusion Hybrid taxi isn't based on the model you can pickup from dealers. Instead, Ford is plucking some parts from the Police Responder Hybrid to handle the rigors of a taxi. This includes the suspension, high-performance brakes, and steel wheels. Buyers can choose either between heavy-duty cloth or vinyl upholstery.
For the Transit Connect taxi, Ford is equipping it with their upcoming EcoBlue 1.4L turbodiesel engine. Taxi specific features include a recessed second-row seat, taxi upfit wiring harness, roof access hole for signage, and rear backup sensors. The Transit Connect taxi can also be made wheelchair accessible via Ford's Qualified Vehicle Modifier program.
Both taxi models will go on sale later this year.
Source: Ford


Ford Introduces Two New Fuel-Efficient Taxis; Hybrid And Diesel Versions Give Operators More Choice, Potential Savings
Company introduces two new taxis today – diesel and hybrid – giving operators even more choices to potentially save fuel New Transit Connect Taxi, when equipped with an available EcoBlue® diesel engine, is targeted to return an EPA-estimated Highway rating of at least 30 mpg All-new Fusion Hybrid Taxi is purpose-built for livery service; includes parts designed for the rigorous duty cycle of the 2019 Police Responder Hybrid Sedan and is projected to offer an EPA-estimated Combined rating of 38 mpg DEARBORN, Mich., June 14, 2018 – Ford, America’s commercial vehicle leader, introduces two new taxis: the new 2019 Transit Connect Taxi and Ford’s most fuel-efficient, purpose-built taxi ever – the 2019 Fusion Hybrid Taxi.
“Taxi operators want vehicles that are reliable, efficient and comfortable,” said Imran Jalal, brand and communications manager for Ford fleet marketing. “Transit Connect Taxi and Fusion Hybrid Taxi offer all three with special attention to potentially help lower fuel costs. Plus, Fusion Hybrid underscores our commitment to introduce even more efficient and capable hybrids in the future.”
New 2019 Transit Connect Taxi
Transit Connect Taxi, when equipped with available 1.5-liter EcoBlue® diesel engine, is targeted to return an EPA-estimated Highway rating of at least 30 mpg. Actual mileage will vary. Final EPA-estimated ratings available early 2019.
The Transit Connect Taxi offers seating for five with a roomy, flexible interior well-suited for livery service. It features more than 60 cubic-feet cargo volume behind the second row, more than the Nissan NV200 Taxi.
Along with the newly available EcoBlue diesel engine, the new 2019 Transit Connect Taxi comes with a recessed second-row seat, a taxi upfit wiring harness, first-row side curtain airbags, optional roof access hole for signage and a reverse sensing system. It is also available with School Bus Yellow paint.
Standard dual sliding side doors provide riders with a wide entrance and exit. A low vehicle floor ensures easy step-ups and step-downs. The new taxi can be made wheelchair accessible through the Ford Qualified Vehicle Modifier program. The modification features an easy-to-deploy ramp that doubles as a deck for cargo when stowed in the back.
First-ever Fusion Hybrid Taxi
The first-ever Fusion Hybrid Taxi shares parts with the Ford Police Responder Hybrid for improved durability in a livery duty cycle (police vehicles come with many heavy-duty chassis parts, like wheels and suspension).
For Fusion Hybrid Taxi, Ford is projecting EPA-estimated ranges comparable to that of the Ford Police Responder Hybrid (projected EPA-estimated ratings of 40 mpg City/36 mpg Highway/38 mpg Combined). Actual mileage will vary.
The 2019 Fusion Hybrid Taxi includes a police-tuned suspension with increased ride height and calibrated high-performance brakes, plus steel wheels. It features heavy-duty cloth seating or optional vinyl seating, vinyl floors, available School Bus Yellow paint, a standard rearview camera, and a mounting plate on top of the instrument panel to secure taxi meters and other fleet equipment.
The 2019 Transit Connect Taxi and 2019 Fusion Hybrid Taxi can be ordered now. The 1.5-liter EcoBlue® diesel on 2019 Transit Connect will be available to order soon. Both Ford taxi models go on sale by year-end.
  • Taxi!

Trying to review an Alfa Romeo vehicle is difficult as I found out with the Giulia Quadrifoglio. There were parts of model that I found to be quite amazing and worthy of putting it on my year-end favorites list. But other traits and details left a very sour taste in my mouth. I ended my review with this line,
“To some, that is the charm of an Alfa Romeo. Within all of those flaws is a brilliant automobile. For others, it is something that should be avoided at all costs.”
Now I find myself in the same difficult position with another Alfa Romeo, the Stelvio. My fingers were crossed that the Stelvio would avoid some of the pitfalls from the Giulia.
If you were to ask me to describe the Stelvio’s design, I would say it is a tall riding Giulia hatchback. The shared DNA is made quite clear in the front as there is a three-leaf design for the grille, narrow headlights set at a slight angle, and there are deep cuts in the hood. More of the Giulia can be seen in the side profile with flowing curves and noticeable fender bulges. One design trait that sets the Stelvio apart from other luxury crossovers is the sharply raked d-pillar that gives it a sporty edge.
The Stelvio’s interior mirrors the Giulia with the same modern design and mixture of high-quality and very cheap materials. I also had an odd build quality issue where the button for the driver’s heated seat would get stuck. I would have to press the button a few times to dislodge it. This is a bit worrying for a brand with a very questionable reliability history.
A set of leather sport seats that are part of an optional sport package came equipped. With increased side bolstering, the seats do an excellent job of holding you in during an enthusiastic drive. It is a shame that the seats aren’t comfortable for long trips. After an hour or so, I found that my thighs were becoming sore. A little bit more seat padding would do some wonders. In the back, there is adequate head and legroom for an average sized adult. Taller passengers will notice headroom is very much at a premium due to the sloping roofline. Cargo space slightly trails competitors with 18.5 cubic feet of space with the seats up and 56.5 when folded.
For infotainment, the base Stelvio comes with a 6.5-inch screen. The Ti makes do with a larger 8.8-inch screen. Both systems use a controller knob on the center console and voice commands to move around the system. If you read our Giulia Quadrifoglio review, then you know I had a number of problems with the infotainment system: Odd design choices, issues with USB and Bluetooth connectivity, and a number of crashes to name a few. I was hoping the Stelvio’s system would have ironed some of the issues. But sadly, the Stelvio experienced the same issues as the Giulia.
Alfa Romeo should have just used the UConnect infotainment system like Maserati does. Just put a different coat of paint and call something different.
Under the hood of the Stelvio lies a turbocharged 2.0L four-cylinder producing 280 horsepower and 306 pound-feet of torque. This is paired with an eight-speed automatic and all-wheel drive. There is also the high-performance Quadrifoglio with a 505 horsepower, twin-turbo V6 engine. 
Some turbo lag makes an appearance when the vehicle begins to accelerate. But once the turbocharger spools up, the Stelvio moves at a surprising rate. This comes down to a broad and flat torque curve. The eight-speed automatic mirrors what I found in the Giulia Quadrifoglio I drove earlier in the year - stumbles with gear changes at lower speeds, but becomes smoother as speed increases.
Handling is where the Stelvio really pulls ahead of the competition. On a winding road, the crossover exhibits excellent control of body motions. Steering provides decent weight and feel needed for an enthusiastic drive. I had to remind myself this isn’t a Giulia sedan, this is a compact crossover. But there is one item that will make you think twice about driving the Stelvio with gusto and that is brakes. The pedal feel was very inconsistent - lightly press on the pedal and the vehicle didn’t feel like it was slowing down, press a little bit further and it felt like the vehicle was going into a panic stop. The issue deals with the brake-by-wire system which uses sensors to measure the amount of force and speed applied to the pedal. This information is then transmitted to a controller which applies the appropriate amount of braking force. This is a problem a few other reviews have noted and one Alfa Romeo needs to address.
The ride is compliant with a fair number of bumps making their way inside. If you’re looking for a somewhat smoother ride, dropping to the smaller 18-inch wheels is recommended. Road and wind noise are kept to average levels for the class. But engine noise is very noticeable inside, sounding like an old diesel truck. Be prepared to keep the volume for the audio system up.
Like the Giulia Quadrifoglio, the Stelvio has me torn. The crossover has a lot going for it such as the sharp exterior, a very punchy turbo-four, and impressive handling. But then I look at the list of issues such as the problematic infotainment system, confused transmission, and a braking system that is very inconsistent. This isn’t including the dark cloud of Alfa Romeo’s reliability. During my week, I had a ‘Service Alarm’ light that would pop up when I started the vehicle. I wasn’t sure what that meant until I accidentally pressed the panic button and the alarm went off for five minutes. I was about ready to break out the wrenches and remove the battery to shut up the alarm, but then it stopped. It needs to be noted that FCA has issued four recalls on the Stelvio at the time of this writing.
If you really have your heart set on a Stelvio, be aware of what you’re getting yourself into. There are moments of brilliance mixed in with the perils. Everyone else should look at the competition.
Disclaimer: Alfa Romeo Provided the Stelvio, Insurance, and One Tank of Gas
Year: 2018
Make: Alfa Romeo
Model: Stelvio
Trim: Ti
Engine: Turbocharged 2.0L MultiAir2 SOHC Four-Cylinder
Driveline: Eight-Speed Automatic, All-Wheel Drive
Horsepower @ RPM: 280 @ 5,200
Torque @ RPM: 306 @ 2,000 - 4,800
Fuel Economy: City/Highway/Combined - 22/28/24
Curb Weight: 4,044 lbs
Location of Manufacture: Cassino, Italy
Base Price: $43,995
As Tested Price: $54,090 (Includes $995.00 Destination Charge)
Options:
Ti Sport Package 22S - $2,500
Driver Assist Dynamic Plus Package - $1,500
Dual-Pane Sunroof - $1,350
8.8-inch AM/FM Bluetooth Radio with 3D Navigation - $950.00
Harman Kardon Premium Audio - $900.00
Driver Assistance Static Package - $650.00
Vesuvio Grey Metallic - $600.00
Compact Spare Tire - $450.00
Convenience Package - $200.00
  • When an Italian does a compact luxury crossover

With more people trending towards trucks and utility vehicles, it would be expected that prices on cars would be falling. But not on used cars according to Edmunds.
In their latest Used Car Report, Edmunds says the average price for a used subcompact rose 3 percent in the first quarter. Compacts saw their average price increase by 3.9 percent. The reason according to the report is due to the increasing cost for a gallon of gas. 
"Used-car shoppers are typically more price-sensitive to changes in the market, but this is the first time in years that we're seeing renewed demand for smaller vehicles With rising fuel costs breathing fresh air into this segment, subcompact and compact cars are finally retaining value again," said Ivan Drury, senior manager of industry analysis at Edmunds.
With rising gas prices, the expectation would be that prices on used trucks and utility vehicles would drop. But Edmunds says prices for these models are holding steady as buyers are willing to pay a bit more at the pump as they place "value on increased cargo capacity, ride height, and other SUV and truck features". 
Source: Edmunds
  • Thank you high gas prices

Lexus finds itself in a bit of a bind. With demand for crossovers growing, Lexus is doing a serious look at its product lineup and deciding what needs to be added and what needs to taken out.
"We're more focused on maximizing the opportunities we have than comparing ourselves," said David Christ, the new general manager for Lexus to Automotive News.
"Our product plan is what I would call a work in progress."
The current focus for Lexus is the upcoming launches of the ES and the subcompact UX crossover. The ES is expected to keep current Lexus owners happy, but the new F-Sport package will hopefully bring in younger people - Lexus expects a quarter of ES sales to be the F-sport. The UX though is seen as what will bring the majority of young buyers to the brand.
But this focus has Lexus doing "a strategic look" at two of their older models, the IS and GS. Both models are late into their lifecycles: IS was launched in 2013, while GS dates back to 2011. The two aren't big sellers either. In 2017, Lexus only moved 7,773 GS models and 26,482 IS models. Rumor has it that the GS could go away if the ES gets all-wheel drive. Christ wouldn't comment on that.
"We can't do it all at once, but we're certainly evaluating both vehicles," said Christ.
Source: Automotive News (Subscription Required)
  • The rise of crossovers is to blame

We're coming up on three years since the Volkswagen diesel scandal came to light. It caused the German automaker to spiral downward with various fines, lawsuits, people either stepping down or being arrested, and sales tanking. By now, you would think that the pain is done and over. But you would be wrong.
Reuters reports today that prosecutors in Germany have fined Volkswagen a billion euros ($1.18 billion) over diesel emission cheating. In a statement, Volkswagen will accept the fine, therefore admitting responsibility for the cheating.
"Following thorough examination, Volkswagen AG accepted the fine and it will not lodge an appeal against it. Volkswagen AG, by doing so, admits its responsibility for the diesel crisis and considers this as a further major step towards the latter being overcome," the company said.
By accepting the fine, Volkswagen hopes "the active regulatory offence proceedings" being conducted will come to an end. It will unlikely end the various criminal cases that German prosecutors are working on against various Volkswagen executives.
Source: Reuters
  • Another day, another fine

Ford has sneakily teased the next-generation Explorer by releasing some photos of the next-generation Police Interceptor Utility. At first glance, you might think that you're looking at current Interceptor Utility. But Car and Driver did some tweaks to the photos which reveal some key changes.
Proportions more in line with a rear-wheel drive platform - longer front, shorter rear. Dash-to-axle ratio is different to the current model A belt line that rises Slightly tapered roofline (We've done our own set of tweaks to the photos which can be seen at the bottom of the article.)
Ford also announced that the next-generation Police Interceptor Utility will offer some sort of hybrid powertrain. The company is tight-lipped on specifics on the powertrain (like if it uses a four-cylinder or a V6), but says it is 40 percent more efficient than the 3.7L V6 and will return a combined figure of 24 mpg - 2 mpg better than the front-wheel drive 2.0L EcoBoost. Ford also claims the new Interceptor also boasts a larger cargo model, even with the hybrid's battery pack.
Ford isn't saying either if this would be appearing on the civilian Explorer, but it would seem to be a safe bet as Ford announced that their utility vehicles would offer some sort of electrification.


Source: Ford


All-New Ford Police Interceptor Utility Pursuit-Rated Hybrid Offers Improved Performance, Lower Gas Costs
All-New Ford Police Interceptor Utility is purpose-built for law enforcement with a standard hybrid powertrain that doesn’t compromise interior space, improves pursuit performance and aims to lower fuel costs, and it comes with standard all-wheel drive  Ford Police Interceptor Utility hybrid expected to save an estimated $3,200 per vehicle in yearly fuel bills versus today’s non-hybrid model, saving tax dollars Ford Telematics with built-in Ford modem and complimentary two-year subscription comes with every vehicle to enable agencies to gain access to quality vehicle information, including fuel use data, CO2 emissions reduction, vehicle health alerts and more WASHINGTON, D.C., June 12, 2018 – Ford, America's best-selling police brand, today introduced the all-new Police Interceptor Utility, the industry's first pursuit-rated hybrid SUV.
The all-new Ford Police Interceptor Utility hybrid responds to calls from law enforcement agencies for improved performance with lower operating costs to help make the lives of law enforcement officers easier with improved pursuit performance and standard all-wheel drive – and save agencies and taxpayers money. Its hybrid batteries are specially placed inside the vehicle so they do not compromise passenger or cargo space.
The all-new Police Interceptor Utility also reflects Ford’s plan to offer hybrid, plug-in hybrid or both versions for every new utility in North America.
“We’re committed to electrifying vehicles for all customers, including law enforcement who need the high performance and low operating costs that Ford’s next-generation hybrids will excel at providing,” said Hau Thai-Tang, executive vice president of Product Development and Purchasing. “Standard all-wheel drive is important because crooks don’t stop when it rains.”
While fuel economy certification isn’t complete, the Police Interceptor Utility hybrid is expected to have a projected EPA-estimated combined label of at least 24 mpg – approximately 40 percent improvement over the current 3.7-liter V6. 
Anticipated fuel economy gains, combined with expected fuel savings from reduced engine idling time, are expected to help save law-enforcement customers an estimated $3,200 per vehicle in yearly fuel bills versus the current Police Interceptor Utility.
If you applied these savings to every Ford Police Interceptor Utility sold in 2017, it would equate to more than $126 million at $2.93 a gallon, or more than 43 million gallons of fuel.
Sales of Ford Police Interceptor Utility rose 5 percent in 2018, building on five straight years of sales growth and capturing 65 percent of the total U.S. police vehicle market.
The all-new Ford Police Interceptor Utility hybrid is projected to accelerate faster, achieve a higher top speed and have at least 40 percent better fuel economy than the previous V6-powered model, helping catch suspected lawbreakers and reduce costs.
The new hybrid-powered Police Interceptor Utility also reduces engine idling time to save fuel when the vehicle is stationary. They hybrid can power demanding electrical loads from lights, computers, radios and other equipment using its lithium-ion hybrid battery, allowing the gasoline engine to shut off and intermittently run to charge the battery.
The Police Interceptor Utility hybrid is calibrated for law enforcement’s unique duty cycle. The utility automatically switches to maximum performance – with the engine and battery working at peak acceleration levels – when needed.
In addition to improved performance and no trade-offs in utility, cargo and passenger space, the Police Interceptor Utility features exclusive 75-mph rear impact protection for safety.
Technology Upgrades
The new Police Interceptor Utility also offers the following features, including:
Standard Ford modem and two-year complimentary Ford Telematics service – a powerful simple-to-use tool that provides vehicle data regarding fuel use, CO2 emissions reduction, and vehicle health Available all-new Police Perimeter Alert enhances previous Surveillance Mode by using the vehicle’s Blind Spot Information System that can monitor approximately 270-degrees of movement outside the vehicle, and analyze motion to determine potentially threatening behavior.  It features a visual display in the instrument cluster that shows moving objects, the motion trail, and threat level. When suspicious behavior is detected, the vehicle automatically sounds a chime, rolls up the windows and locks the doors Available Rear Camera on Demand that allows officers to see what’s happening behind the vehicle Available Class III trailer tow package that enables Police Interceptor Utility to tow up to 5,000 pounds “With Ford Telematics, we’re helping our police customers unlock the data from their vehicles to provide them with more effective ways to manage their fleets and improve operations,” said Stephen Tyler, Ford Police Brand Marketing Manager.
The all-new Ford Police Interceptor hybrid will be built at Ford Chicago Assembly plant and up-fitted at Ford’s Chicago Modification Center. It goes on sale next summer. 
  • Will have the option of a hybrid powertrain

Next week, Volvo will unveil the next-generation S60 sedan at their new plant in South Carolina. To whet our appetite, Volvo has dropped some teaser photos and information on the new Polestar Engineered tuning pack that will debut on the S60.
Only available on the T8 Twin Engine, the pack increases output from 400 horsepower and 472 pound-feet of torque to 415 and 494 respectively. Volvo says the changes to the ECU improves fuel consumption and "refines the automatic gear selection."
For the chassis, the Polestar Engineered tuning pack introduces recalibrated multilink front and rear suspensions, adjustable front strut, adjustable Öhlins shock absorbers, and a set of Brembo brakes.
S60 models equipped with the Polestar Engineered tuning pack will be easy to identify with brake calipers painted gold, a set of lightweight wheels, black chrome exhaust pipes, and gold seat belts.
The Polestar Engineered tuning pack will be available on the V60 and XC60 when it launches early next year. Volvo is planning to build a small number of these models for the global market.
Source: Volvo


Volvo Cars and Polestar launch new Polestar Engineered electrified performance offer
Volvo Cars, the premium car maker, is launching a new upgraded electrified performance offer called Polestar Engineered, specifically developed for its new 60 Series T8 Twin Engine plug-in hybrid cars.
 
The announcement comes one week before the company will reveal its new S60 premium sports sedan at the inauguration of its first US manufacturing plant in Charleston, South Carolina. The plant is the sole production site for the new S60, which is the first Volvo car made in the US.
 
Polestar Engineered, developed by Volvo Cars’ electric performance arm Polestar, is a complete offer, applying Polestar’s performance engineering expertise to the car’s wheels, brakes, suspension and engine control unit. The offer reflects Volvo Cars’ and Polestar’s commitment to electrification.
 
“Electric cars are our future,” said Håkan Samuelsson, president and CEO at Volvo Cars. “Today starts a new era of Volvo electrified models enhanced by Polestar’s performance engineering prowess. This strategy is firmly grounded in our shared belief in an electric future for the car industry.”
 
Polestar Engineered debuts on the forthcoming new S60 premium sports sedan. The offer is exclusively available on the top-of-the-line T8 Twin Engine and is positioned above Volvo’s R-Design versions.
 
Polestar Engineered will also be offered on the new V60 wagon and XC60 SUV from next year, available globally in limited numbers via Volvo dealerships and Care by Volvo, the company’s premium car subscription service.
 
New lightweight wheels have an open design to show off the eye-catching gold-painted six-piston brake callipers, the new hallmark color for Polestar Engineered components. Polestar emblems, black chrome exhaust pipes and gold seat belts also identify Volvo cars equipped with Polestar Engineered enhancements.
 
The Brembo mono-block six-piston brake callipers are cast in one piece and optimised for rigidity. The brake pads have increased heat tolerance while the brake discs’ slotted design further improves heat reduction.
 
The Polestar Engineered multi-link front and rear suspension incorporates premium Öhlins shock absorbers with dual-flow valves that allow stiffening in the springs and dampeners while retaining comfort. The strut bar and adjustable shock absorber design are shared with the Polestar 1 plug-in hybrid performance car.
 
Fine-tuning of the engine’s control unit increases the S60 electrified T8 Twin Engine output to 415hp* combined, with 494 lb./ft. (670Nm) of torque – the standard T8 Twin Engine delivers 400hp* and 472 lb./ft. (640Nm) combined. The software upgrades improve fuel consumption and emissions-neutral performance, and refines the automatic gear selection.
 
“The new S60 T8 Polestar Engineered is an electrified car that does what you want it to,” said Henrik Green, senior vice president of research and development at Volvo Cars. “All components have been fine-tuned to work together, delivering a responsive and exciting driver’s car.”
 
*US specification.
  • Also available on the V60 and XC60

In a staff-wide email sent today, Tesla CEO announced that the company would be laying off nine percent of its staff across the company. The cuts comes as part of "an effort to reduce costs and become profitable.”
“Given that Tesla has never made an annual profit in the almost 15 years since we have existed, profit is obviously not what motivates us. What drives us is our mission to accelerate the world’s transition to sustainable, clean energy, but we will never achieve that mission unless we eventually demonstrate that we can be sustainably profitable. That is a valid and fair criticism of Tesla’s history to date,” wrote Musk.
The layoffs will not effect workers on the production, instead focusing on those working in various white-collar positions. Musk stressed this will not affect plans on reaching production targets for the Model 3 in the coming months.
“Tesla has grown and evolved rapidly over the past several years, which has resulted in some duplication of roles and some job functions that, while they made sense in the past, are difficult to justify today,” Musk wrote.
Those being laid off will get "significant salary and stock vesting" by the company.
Source: Bloomberg, Fortune, Roadshow
  • Elon Musk says the cuts "will not affect our ability to reach Model 3 production targets in the coming months."

If the Trump administration goes forward with placing a 25 percent tariff on new cars, it could cost automakers between one to two million sales.
Analysis done by researcher LMC Automotive said if automakers pass on the full 25 percent tariff to customers, it could cut sales by about two million - about 10 percent of annual U.S. sales. If automakers absorb some some of tariff, the sales drop would reduce to just a million.
Jeff Schuster, senior vice president of forecasting for LMC Automotive tells Bloomberg that consumers would react in one of three ways.
Look at the used car market Move to domestically built products with cheaper pricetags Put off buying a new car with the hope this is only temporary While new car sales have been slipping from the record high of 17.6 million in 2016, LMC Automotive is predicting a still-strong 17.1 million deliveries by the end of the year.
Source: Bloomberg
  • The possible 25 percent tariffs could do some serious damage to car sales

A few weeks ago, based on some findings on GM's order guide, we reported that GMC would soon be announcing Graphite and Graphite Performance editions of the GMC Yukon and Yukon XL.  These new trims would mirror the RST and RST Performance Editions available on the Chevrolet Tahoe RST and Chevrolet Suburban RST.
Today, the official release is out.
For 2019, the Graphite Edition is an appearance package that offered darkened trim and grille, special wheels, and black roof rails.  Stepping from Graphite to Graphite Performance Edition gains the buyer:
6.2L V-8 engine. 10-speed automatic transmission. Magnetic Ride Control. 22-inch six-spoke Gloss black wheels. Active two-speed transfer case (4WD models only). Trailer brake controller. 170-amp alternator. 3.23 axle ratio. High capacity air cleaner. Bose Active Noise Cancellation. Multi-color Head-up Display. 8-inch reconfigurable Driver Information Center. 8-inch Color Touch Screen Navigation with GMC Infotainment System. Both packages are only available on SLT level Yukons, but selecting the Performance Edition allows for Denali level performance previously not available on a Yukon SLT.  Three colors will be available: Onyx Black, White Frost Tricoat, and Dark Sky Metallic. Both 2WD and 4WD will be available. 
Official pricing has not yet been announced, but based on Chevy's RST pricing we estimate a Yukon Graphite Edition 2WD to start around $59,600 and the performance edition to be around $62,300. 
 

2019 GMC Yukon Graphite Edition

2019 GMC Yukon Graphite Performance Edition

2019 GMC Yukon Graphite Edition Wheels

2019 GMC Yukon Graphite Performance Edition Wheels
GMC Press Release on Page 2
 
GMC Introduces 2019 Yukon Graphite Editions 
DETROIT — GMC is expanding its premium Yukon line with the addition of two 2019 Graphite Editions. The all-new Yukon Graphite Edition offers a darkened exterior appearance, while the Yukon Graphite Performance Edition adds vehicle performance upgrades. The Graphite Editions are exclusively available on SLT trim vehicles and can be ordered on either Yukon or Yukon XL in both 2WD and 4WD configurations. 
“The Yukon continues to lead the full-size SUV segment with premium features and an instantly recognizable and well-respected identity,” said Stu Pierce, senior marketing manager for GMC Trucks and Full-Size SUVs. “The all-new Graphite Edition builds on the commanding road presence and inherent capabilities of the Yukon and affords customers the opportunity to project a unique, yet distinctly GMC style.”
The Yukon Graphite Edition includes 22-inch bright machined wheels with Carbon Flash Metallic pockets, black assist steps with gloss black accents, premium black chrome grille mesh insert and fog lamp surrounds, body-color grille surround, black roof rails, gloss black beltline moldings and additional black trim. 
The Graphite Performance Edition requires the Graphite Edition and further adds: 
6.2L V-8 engine.  10-speed automatic transmission. Magnetic Ride Control. 22-inch six-spoke Gloss black wheels. Active two-speed transfer case (4WD models only). Trailer brake controller. 170-amp alternator. 3.23 axle ratio. High capacity air cleaner. Bose Active Noise Cancellation. Multi-color Head-up Display. 8-inch reconfigurable Driver Information Center. 8-inch Color Touch Screen Navigation with GMC Infotainment System. The 6.2L V-8 included with the Yukon Graphite Performance Edition features direct injection, Active Fuel Management and continuously variable valve timing for increased efficiency while providing 420 horsepower and 460 lb-ft of torque. The engine is paired to a 10-speed automatic transmission that further improves efficiency by reducing engine revolutions at highway speeds. These powertrain enhancements are complemented by Magnetic Ride Control, which uses sensors to “read” the road and can alter the damping rate of the shocks almost instantly. The combined power and torque, greater efficiency and composed ride provide a smooth and confident driving experience.
The 2019 Yukon and Yukon XL Graphite Editions will be available this summer in the United States. Package pricing will be announced closer to the on-sale date. Graphite Editions are offered in three exterior colors: Onyx Black, White Frost Tricoat and Dark Sky Metallic.
  • Select from Standard or Performance Editions

The past months has brought some interesting rumors to light on the 2019 Mazda MX-5 Miata. In March, a NHTSA document came to light that revealed the 2019 model would produce 181 horsepower from its 2.0L four-cylinder. A month later, a leaked document from a Canadian Mazda dealer confirmed the horsepower rating, along with some much wanted features such as a telescoping steering wheel.
Recently, Japanese outlet Car Watch had the chance to drive the updated 2019 MX-5 Miata for the Japanese market - called the Roadster. In their first drive report, they confirmed a number of details we have reported previously. For starters, the 2.0L has seen power boosted from 155 to 181. The engine has also see its redline increase from 6,800 to 7,500 rpm. This is due to a number of improvements for the engine including lighter pistons and a larger opening for the throttle body. Mazda has also fitted a new dual mass flywheel that will reduce vibrations coming inside, along with a new muffler. Other changes include new color choices for the exterior and interior; Smart City Brake Support, and a telescoping steering wheel.
Unsurprisingly, Mazda said that it "can't comment at this time" about if these changes will appear in the U.S. Given the amount of evidence, it would be a safe bet that we'll be seeing most, if not all appear on our MX-5 Miata in the near future.
Source: Car Watch, Road & Track
  • 181 horsepower, telescoping steering wheel...

The Mustang Shelby GT350 is already quick around a track, but Ford believed they could do better. So they brought the GT350 into their workshop and made various tweaks and changes. The end result is the 2019 Shelby GT350 that not only promises to be quicker, but also easier to drive at the limit.
It begins with the tires. Ford worked with Michelin on developing tires specific to the GT350. The end result is a set of special Pilot Sport Cup 2 tires with a unique tread pattern and compound. They wrap around a set of restyled 19-inch wheels. The anti-lock brakes and steering have been retuned to handle the performance of the tires.
The suspension gets a new set of springs, anti-roll bars, and an updated tune for the MagneRide adaptive dampers. A new aero package includes a revised grille with sections that are blocked out, revised rear wing, and a Gurney flap.
Ford has also worked on making the Shelby GT350 a bit more comfortable for passengers. There are new door panel inserts, power adjustments for the front seats, dual-zone climate control, 12-speaker audio system, and a eight-inch touchscreen.
Pricing hasn't been announced, but the 2019 GT350 will be available beginning early next year.
Source: Ford


‘Somewhere, Carroll Is Smiling;’ New 2019 Shelby GT350 Adds Tech From Mustang Road Course Racing And All-New Shelby GT500
Upgraded 2019 Mustang Shelby GT350 improves on precision and balance all to deliver faster lap times and performance on-track and on the street 2019 Mustang Shelby GT350 performance enhancements include improved aerodynamics that reduce drag with the new spoiler and adds downforce with new available Gurney flap installed, new custom Michelin Pilot Sport Cup 2 tires, plus chassis and antilock brake tuning for dramatically greater grip Shelby GT350 benefits from Ford Performance Mustang road course racing experience and Shelby GT500 aerodynamic advancements, plus hundreds of hours of on-track and full vehicle simulations; Billy Johnson, Ford GT World Endurance driver, helped dial in final performance tuning DEARBORN, Mich., June 11, 2018 – To improve the new Ford Mustang Shelby® GT350 driver confidence and lap times, Ford Performance leveraged its Mustang road course racing programs and all-new upcoming Shelby® GT500, infusing GT350 with the very latest in track and street technology.
“Somewhere, Carroll is smiling,” said Hermann Salenbauch, global director for Ford Performance vehicle programs. “The new Shelby GT350 is our ultimate track Mustang. We’ve stuck to Carroll Shelby’s original formula for winning championships and made our Shelby GT350 even better with the latest in race-proven aerodynamics, tire and chassis technology.”
From F-150 Raptor to the Ford GT supercar, Ford Performance is creating authentic performance cars, trucks and utilities that deliver heart-pounding excitement for customers around the world.
Next-level chassis technology and aerodynamics
Building on a road course racing and track-focused legacy born in 1965, Ford Performance engineers and designers incorporated the latest advances in tire, aerodynamics and chassis technology into the 2019 Mustang Shelby GT350.
Working exclusively with Michelin, the team also engineered new Michelin Pilot Sport Cup 2 tires with a Shelby GT350-specific tread pattern and different compound to deliver more grip for significantly improved acceleration and lateral acceleration, as well as braking. The 295/35 front and 305/35 rear tires are fitted to improved stiffness and optimize new 19-inch aluminum wheels.
An all-new rear spoiler with optional Gurney flap and optimized grille closeout was designed and tuned with experience gained from wind tunnel development of the Ford Performance Mustang road course racing cars and upcoming Shelby GT500 model. Together, they deliver significant rear greater aerodynamic efficiency when equipped with the new optional Gurney flap on the rear spoiler, which will be available after launch.
Upgrades to Mustang Shelby GT350’s standard MagneRide active suspension complement the aero and tire enhancements with recalibrated springs and revised damping to take full advantage of the improvements.
Stopping power is provided by six-piston front and four-piston rear caliper Brembo™ brakes. For added control and improved driver feedback, Shelby GT350’s electric power-assist steering and three-mode electronic stability control settings feature enhancements taken from Ford Performance’s hundreds of hours of competitive track testing.
Tuning with Billy Johnson in the driver’s seat
Billy Johnson knows racing. As a driver for the FIA World Endurance Ford GT and IMSA Mustang GT4 programs, Johnson has broad expertise in what makes for a great driver’s car. He worked with Ford Performance to dial in the Shelby GT350 for 2019.
Shelby GT350’s exclusive high-revving 5.2-liter V8 remains the most powerful naturally aspirated Ford production engine ever and the only one of its type in the segment – delivering 526 horsepower and 429 lb.-ft. of torque at a blistering 8,250-rpm redline. It’s mated to a track-proven and precise-shifting Tremec® 6-speed manual transmission.
Johnson said the result of the new Mustang Shelby GT350’s aerodynamics tuning, revised brake calibration, and much greater downforce is a more balanced, higher-performing car on the straightaways and especially in the corners.
“Along with improved grip, brake and chassis refinements, Shelby GT350 brings a whole new level of performance driving,” he said. “It’s a rewarding car to drive on track for amateurs and pros alike, while making the driver feel like a superhero. It’s confidence inspiring in corners and begs to be pushed harder and to take corners faster.”
More craftsmanship, technology and style
Inside, driver and passengers of the 2019 Mustang Shelby GT350 are treated to a comfortable, stylish and purpose-built cockpit boasting the latest in advanced technology and premium materials expected of a world-class sports car.  
Fresh sporting cues include a standard machined aluminum instrument panel appliqué with an available exposed carbon fiber version, plus newly designed door panel inserts in dark slate Miko® suede with accent stitching. A wrapped center console offers rich world-class craftsmanship. Standard Recaro race seats with firm side bolstering and open pass-throughs for safety harnesses offer the highest level of performance, while new power-adjustable seating is available with Miko suede inserts for those looking for added comfort.
A new high-performance, custom-tuned 12-speaker B&O PLAY audio system by HARMAN is now available for the 2019 Mustang Shelby GT350, controlled via the now standard 8-inch SYNC® 3 touch screen that features SiriusXM and FordPass™ Connect. Dual-zone electronic automatic temperature control is now standard, along with a universal garage door opener.
New colors for the 2019 Mustang Shelby GT350 include Velocity Blue and for the first time, Ford Performance Blue. Optional factory-painted over-the-top racing stripes are available in high-gloss Shadow Black, Oxford White or Kona Blue. Mirror-mounted Shelby Cobra Projection Lamps come standard in the available Technology Package.
The 2019 Mustang Shelby GT350 will be available starting in early 2019 and will be built at Flat Rock Assembly Plant in Flat Rock, Michigan. Enrollment in an exclusive, complimentary Track Attack driving program from Ford Performance is included with each vehicle.
  • New tires and revised suspension are the key changes

There have been rumors for the past few years of Porsche building a coupe-like version of the Cayenne. Those rumors are coming to fruition as Autocar reports that the Cayenne Coupe has been given the green light.
Porsche CEO Oliver Blume has given the go-ahead on the project which is expected to launch in the fourth quarter of next year. Like key competitors such as the BMW X6 and Mercedes-Benz GLE Coupe, the Cayenne Coupe will adopt of a liftback tailgate. Other design changes include a taillight shape and rear side windows. The model will be positioned as a performance model, which likely means no 3.0L turbocharged V6 from the base Cayenne. Instead, expect to find the twin-turbo 2.9L V6 and twin-turbo 4.0L V8.
Source: Autocar
  • Porsche joins the crossover-coupe pack

It is no secret Fiat Chrysler Automobiles has been dealing with a number of issues with the 2019 Ram 1500 launch. As we reported back in April, the  Sterling Heights Assembly plant was only operating at 60 percent of where the company wants it to be due to various issues. FCA announced that it would be investing $300 million to try and get production back on track, along with extending the production schedule to six days a week and running though Independence Day and Labor day.
But as Automotive News reports, there is a new issue that is likely driving customers away from the 2019 Ram 1500. Currently, the 1500 is only available with the 5.7L HEMI V8. The 3.6L V6 and 5.7L HEMI V8 with the 48-volt mild hybrid system are no where to be seen.
"I have customers looking for them and asking about them every week," said an unnamed Ram dealer in Michigan.
It is unclear why neither one of these powertrains are available. Automotive News has two possible guesses. One is that FCA engineers are still doing some fine-tuning work to the mild-hybrid system before putting them into production. The other comes down to the EPA becoming more  stringent with automakers in terms of emission and fuel economy testing.
While FCA is quick to point out that retail sales were up 18 percent in May to 27,011, we can't help but wonder if that increase is due to the massive incentives that are being put on the last-generation model. Through May, the average incentive on a last-generation Ram 1500 stood at $6.578 according to Autodata Corp. But the lack of new engines for the 2019 Ram 1500 is hurting, as year-to-date sales are down 8.4 percent. Dave Sullivan, a senior analyst with AutoPacific says the lack of V6 this long after the launch is becoming a problem.
"In the old truck, the V-6 represented about 20 percent of sales," he said.
Source: Automotive News (Subscription Required)
  • And the headaches continue for Ram Trucks

Porsche has been calling their upcoming electric sedan the Mission E since the launch of the concept. But when the production model arrives next year, it will be wearing a new name.
Yesterday, Porsche announced the model would be called Taycan (pronounced Tie-con). Loosely translated, the name means "lively young horse." A somewhat fitting name when you take a look at the Porsche emblem and there is a leaping horse.
“Our new electric sports car is strong and dependable; it’s a vehicle that can consistently cover long distances and that epitomizes freedom," said said Porsche Chairman Oliver Blume.
Porsche is still keeping tight lipped on specifics for the Taycan. The automaker has said previously that the model would use two electric motors to produce a total output of 600 horsepower. Back in December, we reported that there could be three power outputs ranging from 402 to 670 horsepower.
Source: Porsche


"Mission E" to become the Porsche Taycan
Porsche announces the name of its first electric sports car Atlanta, Georgia. The future of mobility is another step closer: Series production of the first purely electric Porsche is set to begin next year. In preparation, the vehicle previously operating under the working title "Mission E” has now been given its official name: Taycan. The name can be roughly translated as “lively young horse,” referencing the imagery at the heart of the Porsche crest, which has featured a leaping steed since 1952. “Our new electric sports car is strong and dependable; it’s a vehicle that can consistently cover long distances and that epitomizes freedom,” Oliver Blume, Chairman of the Executive Board of Porsche AG, explains. The Eurasian name also signifies the launch of the first electric sports car with the soul of a Porsche. Porsche announced the name for its first purely electric model as part of the “70 years of Porsche Sports Cars” ceremony.
Two permanently activated synchronous motors (PSM) generating a system output of over 600 horsepower accelerate the electric sports car to 60 miles per hour in well under 3.5 seconds and to 124 miles per hour (200 km/h) on the track in less than twelve seconds. The Porsche Taycan will also offer a consistent level of power that is unprecedented among electric vehicles: multiple launches in a row will be possible without a loss in performance, and the vehicle’s maximum range will be over 300 miles as measured in accordance with the New European Driving Cycle (NEDC). 
Names with meaning 
At Porsche, the vehicle names generally have a concrete connection with the corresponding model and its characteristics. The name “Boxster” describes the combination of the boxer engine and the roadster design; Cayenne denotes fieriness; the Cayman is sharp and agile; and the Panamera, inspired by the Carrera Panamericana long-distance race, offers more than any standard sedan. The name Macan is derived from the Indonesian word for tiger, with connotations of suppleness, power, fascination, and dynamics.
Future investment doubled
Porsche plans to invest more than six billion Euros in electromobility by 2022, doubling the investment that the company had originally planned. Of the additional three billion Euros, some 500 million Euros will be used for the development of Taycan variants and derivatives, around one billion Euros for electrification and hybridization of the existing product range, several hundred million for the expansion of production sites, and around 700 million Euros for new technologies, charging infrastructure, and smart mobility.
Extensive construction and expansion at the Stuttgart-Zuffenhausen headquarters
At the Porsche headquarters in Stuttgart-Zuffenhausen, a new paint shop, dedicated assembly area for the Taycan, and a conveyor bridge for transporting the painted bodies and drive units to the final assembly area all are currently being built. The existing engine plant is being expanded to manufacture electric motors, and a new body shop will also be developed. Investments are also planned for the Weissach Development Center. Production of the Taycan is creating around 1,200 new jobs in Zuffenhausen alone.
  • What was wrong with Mission E?

(Author’s Note: Before you ask, no this isn’t a typo. I really did drive a 2017 Tacoma in 2018. Due to some circumstances, the Tacoma took the place of another vehicle at the last minute. I didn’t realize it was a 2017 model until I saw the sticker. I’ll make note of the changes for 2018 towards the end of the piece.)
I’ll likely make some people annoyed with this line: The Toyota Tacoma is the Jeep Wrangler of the pickup world. Before you start getting banging on your keyboard, telling me how I am wrong, allow me to make my case. The two models have a number of similarities; off-road pedigree, not changing much in terms of design or mechanicals; and somewhat uncomfortable when driven on the road.
Since our last review of the Tacoma, not much has changed with the exterior. The TRD Off-Road package does make the Tacoma look somewhat mean with a new grille, 16-inch wheels wrapped meaty off-road tires, and a khaki paint color that looks like it came from an army base.  The Tacoma’s interior is very user-friendly with a comprehensive and simple dash layout. Most controls are where you expect to find them and in easy reach. But some controls are placed in some odd locations. A key example is the hill descent control which is next to the dome lights on the ceiling. Comfort is still almost nonexistent in the Tacoma. The front seats are quite firm and provide decent support. No height adjustment means a fair number of people will need to make comprises in comfort to find the right seating position. The back seat can fit adults, provided you don’t have anyone tall sitting in the front. Otherwise, legroom becomes very scarce. Under the hood is a 3.5L V6 producing 278 horsepower and 265 pound-feet of torque. This is paired with a six-speed automatic and four-wheel drive. At low speeds, the engine pulls quite strongly and smoothly. It is very different when traveling on the highway as the engine really needs to be worked to get up to speed at a somewhat decent rate. Part of this comes down to the automatic which likes to quickly upshift to maximize fuel economy. There is a ‘sport’ mode on the transmission that locks out fifth and sixth gear, but only improves performance marginally. Fuel economy is towards the bottom with EPA figures of 18 City/23 Highway/20 Combined. My average for the week landed around 19.5 mpg. TRD Off-Road brings forth a retuned suspension setup featuring a set of Bilstein shocks. Usually, this makes the ride is somewhat softer. But in the Tacoma, the ride is quite choppy on any surface that isn’t smooth. Steering is very slow and heavy, making tight maneuvers a bit difficult. A fair amount of wind and road noise is apparent. Any changes to be aware of for the 2018 Tacoma? The only change of note is the addition of Toyota Safety Sense-P. This suite of active safety features includes automatic emergency braking, automatic high-beams, adaptive cruise control, forward collision warning, and lane departure warning. The TRD Off-Road will set you back $35,515 for the Double Cab with the Long Bed - the 2018 model is about $1,410 more. With a few options, our as-tested price came to $40,617. Disclaimer: Toyota Provided the Tacoma, Insurance, and One Tank of Gas
Year: 2017
Make: Toyota
Model: Tacoma Double Cab with Long Bed
Trim: TRD Off-Road
Engine: 3.5L D-4S V6 with Dual VVT-i 
Driveline: Six-Speed Automatic, Four-Wheel Drive
Horsepower @ RPM: 278 @ 6,000
Torque @ RPM: 265 @ 4,600 
Fuel Economy: City/Highway/Combined - 18/23/20
Curb Weight: 4,480 lbs
Location of Manufacture: San Antonio, TX
Base Price: $35,515
As Tested Price: $40,617 (Includes $960.00 Destination Charge)
Options:
Premium & Technology Package - $3,035.00
Tonneau Cover - $650.00
Carpet Floor Mats w/Door Sill Protector - $208.00
Mudguards - $129.00
Bed Mat - $120.00
  • Driving a 2017 truck in 2018

Hyundai rolled out a new concept called the HDC-2 Grandmaster at the Busan Motor Show in South Korea today. This concept previews a new design language that will be appearing on future Hyundai models. Not many pictures of the Grandmaster were provided, but we can pull some details such as an imposing front grille, a boxy shape with rounded corners, and what looks like a sizable glass area.
“Today we showcased the HDC-2 concept vehicle as a blueprint for our evolved design strategy. Making a big step forward in terms of design with the Hyundai Look strategy, we will move towards becoming a brand that customers can really relate to emotionally. Moving on from being a brand that provides a great value, we will aspire to also become a brand that is widely beloved by our customers,” said Hyundai design chief SangYup Lee.
The Grandmaster also provides a preview for upcoming full-size crossover that will sit above the new Santa Fe. Recent spy shots reveal that the production model will have a similar shape to the concept. This new model is expected launch in the next couple of years.
Source: AutoGuide, Motor1
  • All about that box

GMC seems to be following Chevrolet's idea of offering different versions of its trucks to suit different buyers. Case in point is the recently revealed 2019 Sierra 1500 Elevation.
Starting with the double cab variant, GMC adds a combination of body-color and backed-out accents, along with a set of 20-inch wheels finished in black. Under the hood resides the recently unveiled turbocharged 2.7L four-cylinder producing 310 horsepower and 348 pound-feet of torque. Optional engines include the 5.3L V8 with 355 horsepower and the 3.0L turbodiesel inline-six. You will have the choice of two or four-wheel drive. GMC will also offer the X31 Off Road Package that brings Rancho off-road shock absorbers, locking rear differential, hill descent control, skid plates, a two-speed transfer case, and a heavy-duty air filter.
The 2019 Sierra Elevation conveys a youthful, athletic presence that demonstrates GMC’s tailored approach. With inherent truck capabilities and functionality, Elevation is able to take you off the beaten path along with your gear while standing out from the pack,” said Rich Latek, GMC marketing director.
The Elevation will be one of Sierra models available at launch later this fall.
Source: GMC


GMC Reaches New Heights with Next Gen 2019 Sierra Elevation
Double-cab model boasts a bold and confident attitude with elevated capability DETROIT — The launch of the next generation Sierra lineup continues with the introduction of the new 2019 GMC Sierra Elevation. Adding to other recently revealed bold, powerful models of the Sierra, the Elevation makes a statement in design, capability and advanced connectivity.
The Sierra Elevation, along with Denali, AT4 and SLT, is designed to meet the needs and preferences of discerning GMC customers. The next generation Sierras are built upon a prominent foundation of strong bodywork that incorporates chiseled fenders and a tall, powerful hood capped with a bigger and bolder grille than any Sierra prior. Elevation sets itself apart with distinct monochromatic door handles, bumpers and grille surround. The commanding design is amplified by black exterior accents, including the grille insert, tow hooks, side window trim and standard 20-inch aluminum wheels.
Like other modern GMC designs, advanced lighting technology plays a key role in shaping the 2019 Sierra Elevation. New high-intensity LED headlamps that incorporate C-shaped "light blade" signature lighting elements, LED fog lamps and C-shaped LED elements within the taillights are all standard.
“The 2019 Sierra Elevation conveys a youthful, athletic presence that demonstrates GMC’s tailored approach,” said Rich Latek, GMC marketing director. “With inherent truck capabilities and functionality, Elevation is able to take you off the beaten path along with your gear while standing out from the pack.”
The Sierra Elevation is based off the double cab model and is offered with two- or four-wheel-drive configurations. The next generation double cab has nearly 3 inches of additional rear-seat legroom compared to the current model and best-in-class double cab front head- and legroom (max.).
Elevated Capability
The Sierra Elevation leverages innovative technology and smart engineering to enhance capability and elevate driver confidence. With the Traction Select System and the twist of a dial, the driver can choose from preset modes designed for distinct purposes or conditions. Selecting one of these modes adjusts Sierra’s transmission shift points, throttle mapping and other systems to optimize performance for the situation at hand. Tour mode, for instance, is ideal for everyday driving, while Terrain mode configures the Sierra for venturing off the beaten path.
For those who frequently venture off-road, Sierra Elevation is available with the X31 Off Road package, which includes unique suspension tuning with Rancho shocks, locking rear differential, Hill Descent Control, protective underbody skidplates, heavy-duty air filter, dual exhaust system and a two-speed transfer case with low-range gearing topped off with all-terrain tires.
If trailering a camper or other gear is part of your adventure, the 2019 Sierra Elevation was designed from square one with trailering in mind. The available ProGrade Trailering System incorporates a number of innovative features, including an advanced available Trailering App, designed to help take the guesswork out of connecting and towing a trailer.
Purposeful Functionality
The Sierra Elevation was engineered to get you and your gear — be it kayaks, camping, mountain bikes, motorcycles or beyond — where you need to go, building on the foundation of the best-in-class cargo volume standard with every all-new Sierra: 89.1 cubic feet on standard box models. Thanks to more tie-downs, enhanced cargo lighting and larger rear corner steps, the task of loading and securing gear is easier than ever. A 120V outlet in the rear supplies power to equipment needed for a day at the campsite or on the trails.
Available accessory GearOn rails within the box allow for bike racks, kayak carriers and other accessories to be installed or adjusted quickly and easily. The rails’ integrated position makes cargo more accessible and frees up space in the rest of the box.
Next Generation Performance
The Sierra Elevation is available with a number of new engine and transmission configurations that deliver the perfect blend of power and capability.
Standard on the 2019 Sierra Elevation is an all-new 2.7-liter turbocharged engine paired with an eight-speed automatic transmission that delivers 310 horsepower and 348 lb-ft of torque.
The next generation 5.3-liter V-8 is also available on the Sierra Elevation, in conjunction with an eight-speed automatic transmission. This improved version of the 5.3-liter V-8 utilizes a new Dynamic Fuel Management system that enables the engine to operate on one to eight cylinders, depending on demand, to optimize power and efficiency.
Early in 2019, the Sierra Elevation will also be offered with a new 3.0-liter turbo-diesel inline-six-cylinder engine, along with a 10-speed automatic transmission.
Advanced Connectivity
An 8-inch diagonal GMC Infotainment System that incorporates Android Auto and Apple CarPlay compatibility* is standard on the Sierra Elevation, along with a six-speaker audio system. A premium GMC Infotainment System that incorporates a higher resolution touchscreen, advanced personalization features, voice recognition functionality and available in-vehicle apps is optional, as is a 7-speaker Bose premium audio system. USB Type A and Type C ports for charging mobile devices are standard.
The 2019 GMC Sierra Elevation will be available starting in the fall of 2018.
  • Plus a Turbo-Four Engine

Since the launch of Super Cruise on the 2018 Cadillac CT6, General Motors executives said the technology would expand to other brands. But they didn't give a timeframe as to when.
Today at the Intelligent Transportation Society of America conference in Detroit, GM product chief Mark Reuss said Super Cruise would begin rolling out to Buick, Chevrolet, and GMC models after 2020. This will follow Cadillac's expansion of the technology to other models beginning in 2020.
Super Cruise is "a feature that customers routinely come into dealerships asking about, shopping for, and specifically ordering," said Reuss in a speech.
"Making it available in every Cadillac on the showroom floor just makes sense."
GM also announced plans to introduce vehicle-to-everything (V2X) communications in a high-volume Cadillac crossover by 2023. This technology will allow the vehicle to communicate with everything from infrastructure to a person's smart phone to get information on construction, traffic lights, and other road hazards. This technology will expand to other Cadillac models in the future.
Source: The Detroit News, Cadillac


Cadillac to Expand Super Cruise Across Entire Lineup
Super Cruise to roll out to other GM brands V2X communication debuts in Cadillac crossover in 2023 New York — Cadillac plans to expand the rollout of Super CruiseTM, the world’s first true hands-free driver assistance feature for the freeway. Super Cruise will be available on all Cadillac models, with the rollout beginning in 2020. After 2020, Super Cruise will make its introduction in other General Motors brands. Cadillac also plans to offer V2X communications in a high-volume crossover by 2023 and eventually expand the technology across Cadillac’s portfolio. Mark Reuss, GM executive vice president of Global Product Development, Purchasing and Supply Chain, announced these plans at the Intelligent Transportation Society’s annual conference in Detroit Wednesday.
“The expansion of Super Cruise and V2X communications technology demonstrates Cadillac’s commitment to innovation, and to making customers’ lives better,” Reuss said. “GM is just as committed to ushering in a new era of personal transportation, and technologies like these will enable it.”
Reuss’ comments reaffirm GM Chairman and CEO Mary Barra’s pledge in her keynote address at the 2014 ITS World Congress, where she announced Cadillac would begin offering advanced intelligent and connected technology in its vehicles.
“Cadillac is proud to be the leader for the company’s innovation,” said Steve Carlisle, Cadillac president. “Groundbreaking technologies like these continue to provide unparalleled comfort and convenience for our customers.”
The Super Cruise driver assistance feature is made possible by precision LiDAR map data, high precision GPS, a state-of-the-art driver attention system and a network of camera and radar sensors. It requires an active OnStar service plan with emergency services to function. Customers can drive hands-free on more than 130,000 miles of limited-access freeways in the U.S. and Canada. The driver attention system helps to keep drivers engaged and detects when drivers need to pay more attention to the road. Even while using Super Cruise, drivers must always pay attention and not use a handheld device.
Cadillac introduced vehicle-to-vehicle (V2V) communications on the CTS sedan in 2017, which uses Dedicated Short-Range Communications (DSRC) technology. Using the Basic Safety Message as a base, V2V can be extended to the roadway infrastructure and other roadway users (e.g., cyclists, pedestrians, etc.) establishing a V2X ecosystem. Using V2X, compatible vehicles can be notified of hazardous road conditions, traffic light statuses, changing work zones and more. With a range of nearly 1,000 feet, drivers can be alerted to possible threats in time to avoid a crash.
  • Cadillac will begin rolling out Super Cruise on other models beginning in 2020

There were serious concerns before the beginning of Tesla's annual shareholders meeting mostly due to CEO Elon Musk's erratic behavior over the past month or so. But Musk was on his best behavior during the meeting, where some big announcements were made.
On the business front, Tesla shareholders voted to keep Antonio Gracias, James Murdoch, and Kimbal Musk on the board, despite criticisms from a group of shareholders that they aren't fully independent from Musk. There was also the proposal of splitting the chairman and CEO posts held by Musk, with one investor saying it has become difficult for Musk to oversee the company. This motion would be defeated.
"At Tesla we build our cars with love. At a lot of other companies, they're built by marketing or the finance department and there's no soul. We're not perfect but we pour our heart and soul into it and we really care," said Musk, choking up on the mic after the voting took place.
From there, Musk went on to talk about what's in the pipeline for Tesla. He started with the Model 3 by claiming it was the best selling mid-sized premium sedan in the U.S. and had a graph to prove it - though we're a bit dubious as to this claim since the graph doesn't label the x and y axises.
Musk also claimed that Tesla is producing 3,500 Model 3s per week and is “quite likely” to be building 5,000 of the sedans a week by the end of this month. This will happen through the addition of a third production line at their Freemont, CA Plant. 
“The biggest constraint on output is general assembly. We can probably get to 5,000 a week with the current two general assembly lines. But with the third one, I’m highly confident that we can exceed 5,000 units per week,” said Musk.
Production of the mystical $35,000 Model 3 will begin sometime early next year according to Musk. 
In other product news, the Model Y crossover was teased once again. The current plan is to reveal it next March with production to begin in 2020.
Autopilot made some news during the meeting as Tesla announced a new free trial to owners who haven't decided to opt-in. Musk revealed that a planned Autopilot upgrade will begin rolling out later this week and promises a marked improvement.
Other news from the meeting:
Tesla will be adding another plant in Shanghai. The plant will produce battery packs, cars, and powertrains. More details may be announced as soon as next month. Musk also revealed plans to build a plant in Europe towards the end of this year. Tesla service centers will be increasing in size and adding body shops. This could solve one of biggest issues of the current system to repair Teslas involved in accidents. Currently, Tesla requires a body shop to order parts directly from the factory, which takes weeks for parts to be delivered. The semi-truck has been going through various revisions in terms of design and powertrains with the goal of making it a world-wide vehicle. Source: Bloomberg, (2), Reuters, Roadshow
  • Thankfully, Elon Musk was behaving quite well

It appears to be German crossover day. This morning, we reported on Audi's new 'coupe' crossover, the Q8. This evening, BMW has pulled the covers off the 2019 X5.
Like the new X3, the 2019 X5 doesn't look all that different at first glance. Get a bit a closer and the changes become noticeable. The front is slightly bolder with a sculpted hood, larger kidney grilles, and hard corners for the headlights. The side profile features slightly more sculpting for the doors. For the back, BMW is retaining the dual-tailgate from the current X5. Overall dimensions grow by an inch on average.
The interior is a huge improvement over the outgoing model with new dash design and higher-quality materials. A new 12.3-inch display houses the latest version of BMW's iDrive system that has the ability to be updated over-the-air. BMW will continue to offer a third-row as an option, but will not be available at launch.
Two engines will be available for the U.S. market:
X5 xDrive40i: Turbocharged 3.0L Inline-Six - 335 horsepower, 330 pound-feet of torque X5 xDrive50i: Twin-Turbo 4.4L V8 - 456 horsepower and 479 pound-feet of torque Both engines will come with an eight-speed automatic. A plug-in hybrid will arrive down the road.
BMW will offer four suspension setups for the X5 including a standard steel spring and adaptive damper configuration, and a active off-road suspension with air springs. The upcoming X7 will share its steering system with the X5.
Production of the X5 will kickoff at BMW;s Spartanburg, South Carolina plant in the forth-quarter.
Source: BMW


The All-New 2019 BMW X5 Sports Activity Vehicle.
Sculptured styling with increased dimensions and capabilities. New BMW TwinPower turbo engines, 335hp 3.0L 6 cylinder and 456hp 4.4L 8-cylinder New Optional Off-Road Package with air suspension and new rear locking differential. New standard BMW Live Cockpit Professional with two 12.3-inch digital displays. New standard Active Driving Assistant and optional factory Remote Engine Start. Pricing to be announced closer to on sale date of Nov. 2018. Woodcliff Lake, NJ – June 5, 2018…Today, BMW launches the all-new 4th generation 2019 BMW X5 Sports Activity Vehicle with two variants, the X5 xDr40i and the X5 xDr50i. Since its introduction almost 20 years ago, the BMW X5 has been built exclusively in Spartanburg, SC. To date, more than 2.2 million X5’s have been sold worldwide, one third of those sales being in the U.S.
The all-new 2019 BMW X5 will again be built at BMW Plant Spartanburg, SC. This center of competence for BMW X models also handles production of the BMW X3, BMW X4, BMW X6 and will soon add the BMW X7.
New design language exudes confidence and authority.
A wheelbase that is 1.6 inches longer than its predecessor’s, a 1.1 inches increase in vehicle length, an extra 2.6 inches of width and a 1.0 inches increase in height give the all-new 2019 BMW X5 both a muscular appearance and a more generous level of space for passengers and their luggage. The latest X5 retains the hallmark proportions of an SAV, but the pared-back design language – clean surfacing and precise lines accentuating elegant poise and authority – is new. A sculpted hood a short front overhang, lightly hexagonal wheel arches and the dynamic sweep of the roofline exemplify the sporty yet rugged character of the all-new 2019 BMW X5.
“The BMW X5 embodies the origins of the BMW X family and, in its fourth generation, sends out its most powerful message yet in terms of presence and modernity,” says Adrian van Hooydonk, Senior Vice President BMW Group Design. “It defines a new X design language – robust, clear and precise.”
The most striking feature of the front end is the large BMW kidney grille with single-piece surrounds. The all-new BMW X5 comes standard with Adaptive LED headlights, while BMW Laserlights are available as an option and feature blue x-shaped elements, which split up the hexagonal light sources inside the familiar BMW twin headlights, make a distinctive visual statement.
The precise character line in the X5’s flanks, rise up at the rear door, contributing to the modern appearance of the all-new BMW X5. It defines the car’s powerful shoulders and feeds into the rear lights, which extend well into the flanks. At the rear, all lights feature LED technology.
xLine and M Sport model variants, options from BMW Individual.
Distinctive design features differentiate the xLine and M Sport model variants of the all-new BMW X5. The standard xLine model uses exterior cues including kidney grill bars finished in matte aluminum, underbody protection, roof rails and side window surrounds in satin Aluminum, plus other accents in Pearl-effect Chrome, to accentuate the off-road character of the all-new 2019 BMW X5. M Sport specification sees the wheel arch trim, bumper trim, rear underbody protection and side skirts painted in body color and complimented by matte aluminum kidney grille bars, and roof rails and side window surrounds in high-gloss black.
The all-new BMW X5 comes standard with 19-inch light-alloy wheels, the M Sport brings 20-inch M light-alloy wheels in twin-spoke design. Wheels in 21-inch and 22-inch sizes are available as options.
Interior design and controls
Modern and elegant surfacing radiates a feeling of space inside the all-new 2019 BMW X5. The front and rear occupants all enjoy generous accommodation amid an exclusive ambience. The instrument panel is broken up by sweeping horizontal lines, which combine with electroplated trim elements to emphasize the width of the interior. And with its large trim finisher and surrounds likewise made up of electroplated elements, the center console – rising up to the instrument panel – contributes to the handsome overall impression.
The raised seating position, driver-focused cockpit and new design and arrangement of the controls offer the person in the left seat the best possible view to enable him or her to maintain complete command over the task of driving. The fully-digital instrument cluster and the center display are connected visually by consistency of design and share the same graphics. The center console hosts the iDrive Controller, the newly designed transmission selector lever and all other driving-related controls – i.e. the Driving Experience Control switch, the start/stop button and the buttons to activate the air suspension settings and off-road modes (if equipped). A similarly new-look for the heating, air conditioning and lighting functions is on hand.
Carefully selected materials in the interior include a new Vernasca variant for the leather upholstery. Like the optional BMW Individual extended Merino leather trim, it is available in five colors. The all-new BMW X5 is fitted with standard electrically adjustable and heated sports seats. Customers can also specify optional multifunction seats with massage function and seat ventilation for the driver and front passenger.
The standard xLine and optional M Sport models also come with specific design features that bring a distinctive flair to the interior. The interior appointments for the standard xLine model accentuate the car’s versatility and luxurious ambience, while the optional M Sport model enhances the on board driving experience. The two lines include illuminated door sill plates specific to each variant and an anthracite headliner. M Sport trim also includes an M sports steering wheel, M-specific pedals, driver’s footrest and piping on the seats, plus exclusive interior trim strips in Aluminium Tetragon.
Innovations conceived to promote well-being and enhance luxury.
New features designed to maximize the luxurious ambience of the all-new 2019 BMW X5 include the four-zone air conditioning system and a Panoramic glass roof with a 30 percent larger see through area than on the outgoing model. The standard ambient lighting includes the Welcome Light Carpet – which illuminates the entry area to the car when the doors are unlocked or opened – and Dynamic Interior Light, which emits pulsating light signals in pre-defined situations: such as flashing lighting in the door if a door is opened while the engine is running or flashing lighting in the instrument console to alert to an incoming phone call.
The audiophile experience is provided by the optional Bowers & Wilkins Diamond Surround Sound System with 20 speakers and 1,500-watt output (expected to be available from 12/2018). The optional Rear-seat entertainment Professional system (expected to be available from 12/2018) comprises a pair of 10.2-inch full-HD touchscreen displays, a Blu-ray-compatible DVD player, two USB ports, an HDMI socket and two headphone jacks. The system is part of the new display and control concept allowing those in the rear of the vehicle to select and operate entertainment functions. A navigation map and BMW ConnectedDrive services can be accessed from the rear seats.
The all-new BMW X5 can now be specified with remote engine start and heated and cooled cup holders in the center console. Remote engine start can be operated through the Keyfob via a triple click on the lock button from the appropriate distance or via the BMW Connected App. The optional glass controls bring an all-new flourish to the interior of the BMW X5. This exclusive design feature has been developed for the transmission selector lever, the iDrive Controller, the start/stop button and the volume control button for the audio system.
Versatile functionality: two-section tailgate, third row of seats.
As well as increased levels of comfort and exclusivity, the all-new 2019 BMW X5 now offers enhanced functionality. It features a two-section tailgate for ease of loading. If the optional Comfort Access is specified, both sections can be opened and closed automatically and hands-free. If equipped with the optional Luggage Compartment package, (expected to be available from 12/2018), the cargo area cover will lower electrically into the load compartment floor.
If the optional third row seats is specified (expected to be available from 12/2018), customers will receive rear seats with electric fore-and-aft adjustment. A control panel in the cargo area can be used to slide the second-row seats forwards or backwards and fold down the backrests of the second and third rows. The second-row seats can be tilted forward electrically to ease entry/exit into and out of the two third-row seats.
Power and Performance
The all-new 2019 BMW X5 launches with a choice of two new gasoline engines. Heading the range is the BMW X5 xDrive50i, whose extensively developed V8 unit is making its debut. A six-cylinder inline engine can also be found under the hood of the BMW X5 xDrive40i. All engines channel their power through an eight-speed Steptronic transmission, while BMW xDrive intelligent all-wheel drive is on hand to ensure that power is translated into secure progress – on or off road.
The BMW TwinPower Turbo technology in the gasoline engines features turbochargers, High Precision Injection, VALVETRONIC fully variable valve timing and Double-VANOS variable camshaft timing.
Unrivalled power and an unmistakable sound: the new V8 engine.
Fundamentally upgraded from crankcase to engine management, the eight-cylinder engine aboard the BMW X5 xDrive50i serves up an intoxicating blend of prodigious power delivery and signature V8 soundtrack. The turbochargers’ positioning in the “V” between the banks of cylinders is just one of the standout features of the 4.4-liter unit. Newly designed heat plates ensure particularly effective thermal shielding for the crankcase and cylinder head. A new ignition system allows the engine to be restarted even more smoothly and swiftly when the Auto Start Stop function is activated.
The new engine’s peak torque of 479 lb-ft is available over a broad rev range from 1,500 to 4,750 rpm, while its maximum output of 456 hp is on tap between 5,250 and 6,000 rpm. This formidable pulling power is available early and doesn’t let up, resulting in a 0 to 60 mph time of 4.6 seconds.
Straight-six gasoline engine with a thirst for revs.
The power unit fitted in the new BMW X5 xDrive40i boasts the free-revving ability inherent in all six-cylinder inline engines from BMW, plus wonderfully eager response. The 3.0-liter unit employs a twin-scroll turbocharger and direct petrol injection technology whose maximum pressure of 5,076 psi ensures the fuel is delivered in extremely precise doses. The straight-six generates its maximum output of 335 hp between 5,500 and 6,500 rpm, while the peak torque 330 lb-ft is waiting to be unleashed from 1,500 – 5,200 rpm.
The new BMW X5 xDrive40i completes the 0 to 60 mph sprint in just 5.3 seconds.
Eight-speed Steptronic transmission with sportier shift characteristics.
All of the engines available for the new BMW X5 link up with a new, improved version of the eight-speed Steptronic transmission, whose wider ratio spread and new control electronics help to increase the powertrain’s overall efficiency. New torsion dampers reduce rotational irregularities and converter slip for superior shift comfort. And optimised hydraulic control enables even sportier gear shifts.
Optimum power distribution courtesy of enhanced xDrive all-wheel drive and an electronically controlled rear differential lock.
The task of maximizing traction, agility and directional stability in the new BMW X5 falls to the latest generation of the BMW xDrive intelligent all-wheel-drive system, which is now able to split drive torque between the front and rear wheels with even greater precision and speed, as the situation demands. For added efficiency, full power can be directed to the rear wheels only in situations where all-wheel drive is surplus to requirements.
The new xDrive system also offers a rear-biased set-up for those occasions when the driver adopts a particularly dynamic style at the wheel. The electronically controlled rear differential lock (available in both the Dynamic Handling Package and in the Off-Road package) gives the handling an even sportier edge. By limiting equalization of the rotational speeds of the inside and outside wheels through corners, it is able to optimize the transfer of power to the road in dynamic driving situations. As a result, the new BMW X5 can power out of bends with exceptional momentum. Governed by the Driving Stability Control (DSC) system, the locking function for the rear differential improves traction and power transmission when driving over loose ground or on road surfaces offering differing levels of grip for the left-rear and right-rear wheels. It does so by preventing a wheel from spinning when it is struggling for purchase. The locking effect is produced by means of an electric motor and allows as much as 1,106 lb-ft of drive torque to be redirected from the faster-turning wheel to the slower-turning wheel.
New chassis systems enhance off-road ability, sportiness and comfort.
The design principle of the new chassis – based on a double-wishbone front axle and a five-link rear axle – checks all the right boxes for supreme traction on rough terrain, coupled with excellent dynamic responses and ride comfort in road driving. The SAV now comes as standard with the Dynamic Damper Control system, whose electronically controlled dampers sharpen the X5’s handling dynamics at the same time as increasing ride and suspension comfort. The driver can select from two performance settings – for a more comfort-oriented or sportier driving style – using the Driving Experience Control switch.
An array of chassis systems available in a BMW X model for the first time make it possible to boost the off-road performance, sportiness or comfort of the new BMW X5 more effectively than ever before. Adaptive M suspension Professional with active roll stabilization and Integral Active Steering endows the car with exceptionally agility. The roll stabilisation system employs electric swivel motors to enable remarkably swift and precise compensation of body roll under dynamic cornering. This increases agility and directional stability when turning into corners and helps optimize traction when accelerating out. The system has the additional effect of increasing straight-line driving comfort by actively countering the vibrations triggered by bumps on one side of the road. Integral Active Steering (available as an individual option) is also operated electromechanically. By turning the rear wheels in either the same direction as the front wheels or the opposite direction – depending on the vehicle speed – it optimizes cornering agility, ensures effortless lane changes and helps the vehicle to dart through city traffic. Integral Active Steering therefore makes light work of maneuvering into and out of tight parking spots, while also increasing stability when overtaking at highway speeds.
The two-axle air suspension system with automatic self-levelling will be welcomed by anyone seeking greater ride comfort. The suspension’s air supply is controlled individually for each wheel using an electrically driven compressor with pressure reservoir, enabling it to balance out an unevenly loaded vehicle. Since the air suspension works in tandem with the Dynamic Stability Control (DSC) system, the vehicle load registered by its sensors can be factored into braking calculations. When the SPORT driving mode is engaged or the vehicle’s speed exceeds 86 mph, its ride height is automatically lowered by 0.8 inches. The driver can also adjust the body’s ground clearance – for off-road driving, for example – by pushing a button in the cockpit. It can be raised in two stages to a maximum of 1.6 inches above the standard setting. Another button in the luggage compartment activates a loading mode that lowers the vehicle by 1.6 inches. The next time the engine is started, the system will automatically revert to the last mode selected. The desired vehicle ride height can even be set with the engine switched off.
Customers can also specify an Off-Road Package, which is being offered in a BMW X model for the first time. Available for all model variants, the package’s specification includes rugged underbody protection at the front and rear of the vehicle, along with the two-axle air suspension and electronically controlled rear differential lock. The Off-Road package features its own special graphics in the instrument cluster and center display, and an extra button on the center console for selecting the four driving modes. The driver can therefore activate the ideal settings for the vehicle’s ride height, the xDrive system, the accelerator response, the transmission control, and the DSC system’s corrective inputs in preparation for driving on a range of surfaces, such as sand, rock, gravel or snow.
Driver Assist Systems
Offering a significantly expanded array of driver assistance systems compared with its immediate predecessor, the new BMW X5 clearly demonstrates its commitment to taking comfort and safety to new heights. By processing camera images and data acquired by radar sensors, the new systems enable even more comprehensive support for the driver in a variety of situations. As components of the BMW Personal CoPilot, they represent new milestones on the road to automated driving.
The standard Active Driving Assistant on the new BMW X5 includes Blind Spot Detection, Lane Departure Warning, Rear Collision Warning, Frontal Collision Warning and Pedestrian Warning with City Collision Mitigation (which now also alerts the driver if cyclists are detected) Cross Traffic Alert Rear, and Speed Limit Information.
Comprehensive safety and comfort package: Active Driving Assistant Professional.
Available as an option, the Driving Assistant Professional package is comprised of the Traffic Jam Assist with extended hands-off time (expected to be available from 12/2018) as well as the Lane Keeping Assistant with active side collision protection. The Automatic Lane Change feature can be used on highways when the Lane Keeping Assistant is active. Holding the direction indicator in the required direction is all it takes to initiate a lane change. If the sensors detect that there is space in the adjacent lane and that no other vehicle is approaching at high speed, the driver benefits from helpful steering assistance during the lane change. Another component of the system is the evasion aid, which can help avoid collisions with vehicles or pedestrians suddenly appearing in the driver’s path. As soon as an evasive maneuver corresponding to such a scenario is detected, the system assists the driver with steering inputs to direct the vehicle into a clear adjacent lane.
The array of assistance systems contained in this wide-ranging suite of safety and comfort features is composed of the Active Cruise Control (ACC) with Stop & Go and Cross Traffic Alert Front which reduces the risk of a collision when maneuvering forwards towards crossing traffic where visibility is restricted. Also, changing speed limits identified by the Speed Limit Info system can be used by the automatic cruise control system to match the vehicle’s cruise control speed to the road’s posted speed limit.
Active assistance when needed: Emergency Stop Assistant makes its debut.
A new development in the field of safety systems is the Emergency Stop Assistant, which is a component of the Driving Assistant Professional package. Intended to be used in situations where the driver is suddenly incapacitated because of a medical emergency, it is activated by pulling the electric parking brake switch. Depending on the driving situation and the vehicle’s surroundings, the Emergency Stop Assistant will bring the vehicle to a standstill either in the current lane, at the edge of the road or on the hard shoulder. At the same time, the hazard warning lights are activated and the Intelligent Emergency Call function automatically notifies the BMW Assist call center so the emergency services can be alerted.
For comfortable maneuvering into parking spaces: Parking Assistant Plus.
The function of many other assistance systems that make life easier for the driver when maneuvering into parking spaces has been further enhanced. The new BMW X5 is equipped with standard Park Distance Control (PDC), which brings sensors at the front and rear of the vehicle.
The Parking Assistant Plus in the new BMW X5 enables automatic selection and use of parallel parking spaces. These parking spaces are detected by ultrasonic sensors as the vehicle passes them. The Parking Assistant function is activated at the touch of a button on the center console. The system then takes care of the acceleration, braking, steering and gear changes necessary to maneuver into the space.
Unique, high-precision guidance: the Back-up Assistant.
A further illustration of BMW’s ongoing progress towards automated driving is provided by the Back-up Assistant. This function offers a level of assistance – for leaving a parking space or maneuvering in a confined area – as yet unmatched by other vehicles. The Back-up Assistant takes over steering to maneuver the vehicle mirroring the path most recently used in the forward direction. This system makes reversing for a distance of up to 55 yards a particularly effortless task in the all-new 2019 BMW X5. All the driver has to do is operate the accelerator and brakes and monitor the surrounding area. The system is initiated by pressing a button when the vehicle is stationary and the gear selector is in the “P” position. The steering movements made during the vehicle’s last forward maneuver are stored by the system and retained. This means the Back-up Assistant can be used to maneuver the all-new 2019 BMW X5 backwards out of a parking position that it drove into forwards the previous day.
The driver enjoys ideal all-round visibility, thanks to both the rearview camera and the Top View, Panorama View and 3D View functions of Parking Assistant Plus, which create a 360-degree image of the vehicle and its surroundings in the Center Display. In addition, drivers can use the Remote 3D View feature to access a three-dimensional live image of their vehicle and surroundings on a smartphone.
BMW Live Cockpit Professional: Seventh generation of the BMW iDrive Operating System
The BMW Live Cockpit Professional in the all-new 2019 BMW X5 combines a new display and control concept and the ultimate in connectivity to create a superb all-round package. The latest-generation of the iDrive comprises a high-resolution digital 12.3” instrument cluster display behind the steering wheel and a 12.3” center display diagonally across. The system offers many hardware upgrades including new haptic controls on the iDrive controller, an advanced tablet-like touch interface, stunning visualizations, and the largest displays in a BMW yet. This latest system perfectly blends the strengths of previous iDrive concepts with the modern ways in which people expect to interface with their popular electronic devices. The multi-modal approach of the iDrive touch controller, large touchscreen center display, cloud based voice control, and gesture control allow users to interact in the way of their choosing.
The seventh incarnation of iDrive, which runs the latest BMW Operating System, has a cutting-edge, fully digital design and is geared even more closely to the driver’s needs by allowing him or her to customize the system to his or her own preference with customizable widgets of information. This new level of personalization is then stored in the BMW cloud and can follow the customer to other BMW vehicles. Various information from categories such as driving, entertainment, navigation, connectivity, and the vehicle info itself, can be selected in nearly any combination in any of four layouts on the Center Display. Multiple pages can be created and easily accessed with a simple swipe across the screen with your finger.
To maximize the capabilities of the large 12.3” digital instrument cluster, the traditional circular gauges have been finessed into an all-new design pushing the speedometer and tachometer gauges to the outer edges of the display as geometric bands. This new design opens space in the middle for routing and navigation. Information from the center display can also be shown within the tachometer. Additionally, your driving mode will determine your visual display style.
Other elements of the BMW Live Cockpit Professional are the Navigation Professional system, a hard-drive-based multimedia system with 20 GB of memory and two USB ports, plus Bluetooth interfaces. The driver can be automatically detected and personal settings activated either using the traditional vehicle key or by downloading the driver’s personal settings the BMW Cloud.
Drivers can enjoy the full benefits of the car’s intelligent connectivity capabilities through vehicle apps such as news, weather, office and online search. Other capabilities include Intelligent Emergency Call – which automatically summons swift assistance in an emergency – and regular updates for the navigation system’s maps.
For the first time, a selection of digital services will be bundled together and offered for the new BMW X5 under the guise of the Connected Package Professional. The Connected Package Professional includes Remote Services, Concierge Services, On-street Parking Information, and Real Time Traffic Information and is standard on the all-new X5 for a duration of 4 years. Having this package on the vehicle will allow for easy integration and adaptation of new technology over time. Customers can continue to download various new digital services individually as they become available or renew existing services via the ConnectedDrive Store.
BMW Connected: digital services for individual mobility.
BMW Connected is the companion app for BMW drivers. Intelligent connectivity helps users to reach their destination easily and with minimal stress – and not only when in their car; BMW Connected is an all-embracing concept designed to seamlessly connect the driver and their smartphone with their vehicle.
At the heart of it all is the Open Mobility Cloud, which allows the app to connect the car with the customer’s digital devices. These could include the iiPhone and Apple Watch, smartphones and smartwatches running the Android operating system, Alexa-compatible smart devices and Google Home. For instance, the BMW Connected app can import appointments and addresses from the customer’s calendar entries straight into the navigation system to begin route guidance. The system calculates the optimum departure time based on real-time traffic information and notifies the driver with a message on their smartphone when it is time to leave. As the vehicle is linked up via the Open Mobility Cloud, it is able to access the calculated route directly when the navigation system starts up.
Always up to date thanks to Remote Software Upgrade.
The Remote Software Upgrade feature keeps the vehicle up to date with the latest software. All updates can be loaded over the air, similar to smartphones. The upgrades can be loaded onto a smartphone via the BMW Connected app when connected to a domestic Wi-Fi network or imported directly via the BMW’s built-in SIM card, which happens automatically for important vehicle upgrades.
Specifications
    X5 xDr40i X5 xDr50i Seats -- 5 5 Number of Doors -- 5 5 Drive type -- AWD AWD Length inches 194.3 194.3 Width inches 78.9 78.9 Height inches 69.0 69.0 Width including mirrors inches 87.3 87.3 Wheelbase inches 117.1 117.1 Ground clearance inches 8.7 8.7 Turning radius feet 20.7 20.7 Shoulder width front inches 60.0 60.0 Shoulder room rear inches 58.1 58.1 Legroom front inches 39.8 39.8 Legroom rear inches 37.4 37.4 Headroom front inches 40.8 40.8 Headroom rear inches 38.7 38.7 Trunk volume (SAE) ft³ 31.7 31.7 Fuel Tank capacity gallons 21.9 21.9 Curb weight lbs. 4,813 5,17 Gross vehicle weight lbs. 6,162 6,46 Payload lbs. 849 871 Tow capacity, 12% braked  lbs. 6,603 6,603 Tow capacity with factory hitch lbs. 7,209 7,209         Engine type -- B58B30M1 N63B44M3     X5 xDr40i X5 xDr50i Cylinders -- 6 8 Valves per cylinder -- 4 4 Stroke mm 94.6 88.3 Bore mm 82.0 89.0 Displacement cm³ 2,998 4,395 Compression rate :1 11 10.5 Engine power hp 335 456 at rpm 1/min 5,500 - 6,500 5,250 - 6,000 Engine torque ft. lbs. 330 479 at rpm 1/min 1,500-5,200 1,500-4,750 Fuel type -- gasoline gasoline Recommended Fuel -- AKI 93 AKI 93 Engine oil capacity quarts 6.5 10.5 Output per liter hp/liter 110.0 109.0 Transmission type -- 8HP 8HP Transmission type -- automatic automatic Gear ratios 1st gear -- 5.25 5.00 2nd -- 3.36 3.52 3rd -- 2.17 2.20 4th -- 1.72 1.72
  • Keeps that familiar look

Mercedes-Benz is the latest automaker to join the subscription service game. 
The Mercedes-Benz Collection has launched a two-year pilot program in Nashville and Philadelphia which will give subscribers access to 30 models variants for a monthly fee ranging from $1,095 to $2,995. There is a one-time activation fee of $495 when you sign up.
"We know there is a market opportunity for people who would like the ability to move in and out of vehicles, depending on what they need or want at a particular point in time, or who don't want to own a vehicle right now. That's why we are excited to test the waters with Mercedes-Benz Collection," said Mercedes-Benz USA CEO Dietmar Exler in a statement. 
Three subscription tiers will be on offer - Signature, Reserve, and Premiere. Each tier will have a selection of models ranging from sedans to SUVs. Each tier will also have a selection of AMG models. The monthly fee will include 24/7 roadside assistance, insurance, and maintenance. Subscribers will use an app on their phone to choose any vehicle within their tier and will be dropped off by a concierge service.
Mercedes hopes this program will help bring in new customers and encourage current ones to consider buying a new model.
"There will be customers who will test five to 10 vehicles [via the subscription program] and then decide to buy one model," said Exler.
Source: Automotive News (Subscription Required), Mercedes-Benz


Mercedes-Benz launches broadest luxury vehicle subscription plan in the U.S. with "Mercedes-Benz Collection"
Luxury Vehicle Subscription Service to Launch as Pilot in Nashville and Philadelphia Mercedes-Benz today launched Mercedes-Benz Collection, providing the broadest offering of any luxury automaker for those drivers who prefer the variety and convenience of a subscription service. A collaboration between Mercedes-Benz USA, Mercedes-Benz Financial Services USA and Mercedes-Benz dealers, Mercedes-Benz Collection allows subscribers to switch between different types of vehicles depending on their needs or lifestyle. The service is available as a pilot in two cities: Nashville, TN and Philadelphia, PA. 
"We're always looking to stay ahead of our customers' needs and wants, as well as to bring new people to the brand," said Dietmar Exler, president and CEO for MBUSA. "We know there is a market opportunity for people who would like the ability to move in and out of vehicles, depending on what they need or want at a particular point in time, or who don't want to own a vehicle right now. That's why we are excited to test the waters with Mercedes-Benz Collection."
"Customer's appetites are changing when it comes to how they access products and services, and our financial and mobility services are evolving to fit those demands. Adding Mercedes-Benz Collection's subscription services to our product portfolio is a natural fit," said Geoff Robinson, vice president, Mercedes-Benz Financial Services USA LLC. "We are working to provide one of the most diverse offerings in the market today and expect to learn a lot from this pilot."
There are three tiers in the program – Signature, Reserve and Premier – with two offered in each city and prices ranging from $1,095 to $2,995 per month (depending on city/level). Subscribers pay a one-time activation fee of $495 and may then choose from all the vehicle body styles offered in that subscription tier, including Mercedes-Benz SUVs, sedans, coupes, cabriolets, roadsters and wagon models. Each tier also allows access to the company's popular high-performance Mercedes-AMG models.
The Mercedes-Benz Collection works through a combination of the new Mercedes-Benz Collection app and a local concierge. Once subscribed, customers initiate vehicle exchanges, concierge communication and other actions via the app. Concierge staff then ensure the delivery is consistent with the details and preferences in the customer's profile. Subscribers can access any type of vehicle within their tier with no mileage limitations. The monthly subscription fee for the tier also includes insurance, 24/7 roadside assistance and vehicle maintenance.
How It Works:
Those interested can download the Mercedes-Benz Collection app via the Apple App Store or Google Play Store and hit "Sign up" Users then create an account (provide a credit card, select a plan and provide a picture of the driver's license associated with the account). Information is verified, and driving and credit history are checked (subscriber may be contacted with any questions). In most cases, the application is processed and the subscriber is contacted within one business day. Subscriber is contacted to find out his or her vehicle needs and desired delivery time and location. After the first delivery, subscribers put their requests in via the app. Requests received by noon can typically be fulfilled the next day. Concierge delivers the new vehicle washed, with a full tank of gas and takes away the previous vehicle. Further information on Mercedes-Benz Collection is available at collection.mbusa.com.   
  • Only available in Nashville and Philadelphia

Today at an event in in Shenzen, China, Audi revealed the long-teased Q8 crossover.
Audi describes the Q8 as a vehicle that "combines the elegance of a four-door luxury coupé with the practical versatility of a large SUV." We're really thinking that Audi stretching the definition of a "four-door luxury coupé" because the only the only coupe like features we can see are the lowered roof line and wider stance. The front end is a bit too busy with a large single-frame grille and vents for the bumper. Along the side, Audi's designers squared off many of the corners and there is a massive C-Pillar.
The interior is similar to the new A6 and A8 sedans with a modern design for dash, dual-touchscreens that control many aspects of the vehicle, and Audi's Virtual Cockpit system. There will be a fair amount of cargo space in the Q8 with Audi quoting measurements of 21.3 cubic feet with the rear seats up, and 61.9 cubic feet when folded.
All Q8s will come equipped with a 48-volt mild-hybrid system that acts as a starter motor and providing more oomph in hard acceleration. The system can also recover energy when braking. At the moment, Audi has only announced two engines for the Q8 - both 3.0L turbocharged V6s. One is a diesel that will be sold in Europe, and the other being a gas engine. quattro all-wheel drive will come standard.
Adaptive dampers will come standard, while an optional air suspension system can raise or lower the ride height by 3.5 inches. All-wheel steering is available as an option and can turn the rear-wheels up to 5 degrees.
Sales of the Q8 kick off in the third-quarter of this year for Europe. Expect the U.S. to follow either late this year or early next year.
Source: Audi


The new face of the Q family: the Audi Q8
Expressive design with new Singleframe and features from the original Audi quattro Generous, elegant interior, touch operating concept and high-tech navigation All-wheel steering and quattro drive for agile handling and best traction The Audi Q8 combines the elegance of a four-door luxury coupé with the practical versatility of a large SUV. Richly equipped, comprehensively connected and tough enough for off-road duty, it is a confident companion for business and leisure. The Audi Q8 launches on the European market in the third quarter of 2018.

Versatile, sporty, elegant: the dimensional and space concept
The Audi Q8 exudes sporty dynamics and upscale prestige like no other SUV from the brand with the four rings. 4.99 meters (16.4 ft) long, 2.00 meters (6.6 ft) wide and 1.71 meters (5.6 ft) tall, the SUV coupe is wider, shorter and lower than its Q7 sister model. With a wheelbase of nearly 3.00 meters (9.8 ft), it offers a spacious interior that beats of its direct competitors in most relevant dimensions, including interior length and headroom. There is a three-seat system in the rear with longitudinally adjusting upon request. With the seatbacks folded down, the luggage compartment under the power rear hatch holds up to 1,755 liters (62.0 cu ft).
New presence for the Q family: the exterior design
With the imposing Singleframe in octagonal design, the Audi Q8 is the new face of the Q family. The brawny radiator grille stands upright and, together with the spoiler that has been drawn toward the front and the large, highly contoured air inlets, emphasizes the self-confident look. The elegantly sloping roofline terminates in gently inclined D-pillars and rests against the quattro blisters above the wheel arches, which house up to 22-inch wheels. Numerous details hint at the design of the original quattro. Strong contours and athletically tight surfaces convey a feeling of power, sophistication and the special dynamics of the permanent all-wheel drive. The spoiler, wheel arch trims, door trim strips and diffuser are in a contrasting color, to further emphasize the off-road look.
Standard LED headlights illuminate the road, with HD Matrix LED technology available as an option. Here both the three-dimensional signature of the daytime running lights and the taillights have a digital character. A light strip connects the units at the rear. As in the original Audi quattro, a black surface underlays this strip. Q8 owners can use the myAudi app on their smartphone to activate various lighting functions and experience them from the outside.
Sporty driving experience: suspension and drive
Audi is quattro and quattro is Audi – of course this applies in particular to the Q8, the top SUV of the brand. The purely mechanical center differential transfers the forces to the front axle and rear axle at a ratio of 40:60 as standard. When required, it transfers the majority to the axle with the better traction. That plus as much 254 millimeters (10.0 in) of ground clearance, short overhangs and hill descent control means the Audi Q8 can keep going even after the pavement ends. The suspension with damper control is standard. Audi offers the adaptive air suspension with controlled damping as an option, with either comfort or sport setup. It adjusts the ride height depending on the driving situation and the driver’s preference by as much as 90 millimeters (3.5 in).
Besides the standard progressive steering, whose steering ratio becomes increasingly direct the further the steering wheel is turned, Audi also offers the option of all-wheel steering. It can turn the rear wheels as much as 5 degrees – counter to the direction of the turn at low speeds to increase agility and at higher speeds in the direction of the turn for better stability.
All drive systems are particularly efficient thanks to the new mild hybrid technology (MHEV). The 48-volt primary electrical system incorporates two important technology modules: a lithium-ion battery and a belt alternator starter. During braking, it can recover up to 12 kW of power and feed it back into the battery. The MHEV technology enables long coasting phases with the engine deactivated and a start-stop range that begins at 22 km/h (13.7 mph).
Clarity is the new premium: the interior
Easy-to-understand symbols stand for the digital precision from Audi and for the high level of integration of architecture and operation. The central element is the top MMI touch response display. With its black-panel look, it almost dissolves into a large, black surface when switched off. All elements refer logically to one another, from the flat air vent strip to the wide console on the center tunnel bearing the tiptronic selector lever. In the dark, the optional contour light traces the distinctive design lines of the interior and provides backlight for the three-dimensionally lasered quattro badge above the glove compartment – an example for the love of detail at Audi. Options including customized contour seats with massage function and ventilation, four-zone automatic air conditioning and the air quality package further enhance the elegant ambiance.
Sensitive and concise: controls and displays
With the MMI touch response operating concept of the new Audi Q8, nearly every function can be accessed via two large displays. The upper 10.1-inch display is used for controlling the infotainment and the navigation system. The driver uses the 8.6-inch display below that for heating and air conditioning, convenience functions and text input, the latter with his or her wrist resting comfortably and ergonomically on the selector lever.
Operation is swift and simple: A tactile and acoustic click confirms when a finger activates a function. In addition to all this, the natural language voice control turns the Audi Q8 into an intelligent dialog partner. Drivers can word their commands freely. The voice control can, for example, understand the sentence “I am hungry” and in response suggests restaurants close by.
The instruments are shown in the fully digital Audi virtual cockpit. Its high-resolution 12.3-inch display can be switched between two views via the multifunction steering wheel. The optional plus version includes a third, particularly sporty view. The head-up display also projects important information onto the windshield, including detailed lane guidance for navigation.
Clever networking: Audi connect and driver assistance systems
On the German market, the Audi Q8 comes standard with the top-of-the-line infotainment system, MMI navigation plus. It includes the Audi connect data transfer module with the LTE Advanced standard and a Wi-Fi hotspot. The navigation system recognizes the driver’s preferences based on previous journeys and therefore can make intelligent suggestions. The online services from Audi connect add predictive features to the route planning process. This lets the two Car-to-X services for traffic sign information and hazard information benefit from the swarm intelligence of the Audi fleet. The optional Audi connect key lets the driver lock/unlock the vehicle, and start the engine using a compatible Android smartphone. Individual user profiles allow as many as 400 preferred settings to be stored for multiple drivers. With the myAudi app, drivers can also transfer special destinations to the navigation system, stream music or transfer the smartphone calendar to the MMI.
The Audi Q8 is top-notch with respect to sound and connection quality thanks to the Audi phone box and voice-over LTE. The same applies to the Bang & Olufsen Advanced Sound System. It delivers fascinating 3D sound with height information to all five seats. The music unfolds exactly how it was recorded in the concert hall.
Whether parking, in the city or on long journeys – the Audi Q8 supports its driver in many situations. Among the systems contributing here are the adaptive cruise assist, efficiency assist, crossing assist, lane change warning, curb warning and 360 degree cameras. One highlight is the remote garage pilot, which will follow in early 2019. Under the supervision of the driver, it guides the SUV into a garage and back out again autonomously. The driver gets out of the car beforehand and activates the process using the myAudi app on their smartphone. The (remote) parking pilot offers a similar level of convenience. Behind all of these features is the central driver assistance controller. It continuously computes a differentiated model of the surroundings and uses this to manage the assistance systems. The required data are obtained – depending on the selected options – from up to five radar sensors, six cameras, twelve ultrasound sensors and the laser scanner. 
  • We're really stretching the definition of a coupe

Over two years ago, hundreds of thousands of people put down $1,000 deposit to order their very own Tesla Model 3 with the hoping of getting it in 2018. Flash forward to now and a growing number of those have been asking for their money back.
Second Measure, a company that analyzes billions of dollars in anonymized credit and debit card purchases to determine various trends said in a post today that 23 percent of reservation-holders have asked for a refund as of April, a noticeable increase from 12 percent last August. Contrast this with only 8 percent of holders that have configured a Model 3 for production. The remaining 69 percent is a mixture of those waiting for their turn to configure their vehicle and those who are waiting for a refund - numbers Tesla only knows.
A Tesla spokesperson told Recode that their internal data "does not align" with Second Measure's data, but would not go into specifics into as to how far off.
Tesla has been struggling with Model 3 production for some time, pushing back production targets several times. At the moment, Tesla is targeting "approximately 5,000 Model 3's per week in about two months."
Source: Recode, Second Measure
  • The Pandora Box known as the Model 3 continues to dole out the pain

Let us wind the clock back to November 2016. We wrote a piece in the rumorpile  saying that the next-generation Dodge Challenger and Charger had been pushed back to 2021. It was unclear as to why the models were being pushed back, but there was the interesting tidbit that they would be using the new Giorgio platform - what underpins the Alfa Romeo Giulia and Stelvio. But there may be a chance that the next-generation models could use a heavily upgraded version of the current platform which can trace its roots back to the 1990s from Mercedes-Benz.
"We may not necessarily have to go as far as the Giorgio architecture for Dodge as long as we are willing to commit to a significant upgrade to the current architecture to make it competitive. That's something that's already started," said FCA Sergio Marchionne during last Friday's five-year presentation.
"Certainly by the time we finish with that architecture, you will not recognize its origins. We may maintain its bare-bones structure."
Obvious question: Why not Giorgio?
"The problem with Giorgio is from size and capability standpoint it reflects much more of a European performance requirement than it does the American heritage of Dodge," said Marchionne.
We read this one of two ways. Either the current incarnation of Giorgio cannot fit a HEMI V8 or is unable to handle the power output of high-performance versions like the Hellcat.
As for the Chrysler 300, Marchionne hinted that it might not make a return.
Source: Motor Authority
  • Giorgio-who?

Fiat Chrysler Automobiles announced their latest five-year plan at an investor meeting in Italy. This is important as it will be the final plan presented by CEO Sergio Marchionne who will retire next year. Aside from news about Sergio actually wearing a tie (I'm being completely serious here -WM), there were some interesting bits to come out. We're going to breaking down what is in store for each brand along with intriguing information that was presented.
Jeep:

Four new models are expected to launch by 2022. They include the Wrangler pickup, Wagoneer/Grand Wagoneer, a smaller model to sit underneath the Renegade, and a three-row crossover to sit next to the Grand Cherokee. By 2021, Jeep is planning to have an electrification option on each nameplate by 2021, along with Level 3 autonomous capability - basically a car can drive itself in limited situations, but requires a driver to jump in at a moment's notice. Diesels will be gradually dropped from the various models, but no timetable was provided. A new 'hawk will be joining the Jeep family. Deserthawk will be models setup for "high-speed sand running". Think Ford Raptor as an SUV. This will launch in the first quarter of 2020. Production capacity will increase to keep up with the demand for SUV and crossovers around the world. Jeep will also introduce Jeep Wave. It's part 'loyalty program' and connected car services, and part subscription service. The loyalty part grants owners of the Hawk models and Wranglers 'Jeep Coins' when purchasing. The coins can be used to borrow other FCA products. Additional coins will be available for purchase. A pilot program will begin in 2019. A more traditional subscription service will launch in 2019. Subscribers pay a monthly fee for access to a fleet of FCA vehicles. Three tiers - Good, Better, and Best - determines vehicle selection, insurance, and concierge services. Jeep will also launch a in-car payment pilot program in 2019 as part of Wave.
Ram Trucks:

A new Ram Heavy-Duty will be arriving in 2019. By 2022, Ram will have three new/redesigned models: A midsize pickup, redesigned ProMaster City, and the high-performance Ram 1500 TRX. The TRX will compete against the Ford F-150 Raptor. Both the Ram 1500 and redesigned ProMaster City will come with Level 2 autonomous capability in 2021. Maserati:

The Alfieri, which was first shown in 2014 as a concept will finally launch it as the replacement for the GranTurismo by 2022. The platform has been designed in such a way that allows for three different powertrains - including a plug-in hybrid and fully-electric version. Maserati claims a 0-100 kph time of two seconds for the electric version. The Alfieri EV will serve as the flagship for Maserati's new Blue lineup. This is the designation for any Maserati model equipped with a fully-electric powertrain comprised of three motors, new battery tech, and all-wheel drive with torque vectoring. The Levante, Ghibli, and Quattroporte will also have Blue models. Redesigns of the Ghibli, Levante, and Quattroporte will arrive by 2022. All of them will have a plug-in hybrid option. A new, smaller crossover will sit alongside the Levante. It is expected to possibly use the platform that underpins the Stelvio. Maserati is hoping to sell 100,000 vehicles by 2022, double the current sales volume. Alfa Romeo:

Remember those rumors about the Giulia Coupe? It is real and will be named GTV. Alfa is promising more than 600 horsepower thanks to electric boost, all-wheel drive with torque vectoring, and 50:50 weight distribution. 8C will also be making a comeback as a mid-engine coupe. With a twin-turbo gas engine and electric drive system for the front axle, the combined output will be 700 horsepower. It will also feature a carbon fiber monocoque chassis. Alfa looks to getting out of the subcompact game as there is no product listed for 2022. They'll be sticking in the compact realm with a new Giuletta. Two new crossovers will be joining the lineup. One will sit underneath the Stelvio and the other will sit above. We know a little bit more about the larger model as it will be the first model to debut a new mild-hybrid system. It will be underpinned by a stretched version of the Giulia's platform. Also in the cards are long-wheelbase variants for the Giulia and Stelvio (most likely for China) and plug-in hybrid models. Other Details:
Fiat got a brief mention during the meeting. There will be a new 500e and a wagon variant known as Giardiniera. Both models will get a new electric powertrain built for small vehicles. The 500L and 500X will come with hybrid powertrains. No time frames were revealed. "Chrysler is going to continue to be a relevant brand in the United States," said Marchionne when asked about the brand. No mention of Dodge during the conference. FCA will be working a number of partners on developing autonomous vehicles. This includes an expanded partnership with Waymo, along with new partnerships with Aptiv and BMW. Diesel will be phased out from all passenger cars in Europe by 2021. Source: Fiat Chrysler Automobiles
  • Lots of changes for Jeep and Alfa Romeo

Volvo Cars of North America, LLC - Up 50.6% (9,338 Vehicles Sold This Month, 37,754 Vehicles Sold This Year)
Mitsubishi Motors North America - Up 31.7% (12,416 Vehicles Sold This Month, 56,178 Vehicles Sold This Year)
Jaguar Land Rover North America - Up 16.8% (9,469 Vehicles Sold This Month, 50,231 Vehicles Sold This Year)
Mazda North American Operations - Up 15.1% (29,980 Vehicles Sold This Month, 137,031 Vehicles Sold This Year)
FCA US LLC - Up 11% (214,294 Vehicles Sold This Month, 913,212 Vehicles Sold This Year)
Hyundai Motor America - Up 10.1% (66,056 Vehicles Sold This Month, 270,996 Vehicles Sold This Year)
Subaru of America, Inc. - Up 7.2% (60,146 Vehicles Sold This Month, 263,019 Vehicles Sold This Year)
Porsche Cars North America, Inc. - Up 4.2% (5,005 Vehicles Sold This Month, 24,529 Vehicles Sold This Year)
Volkswagen of America - Up 4% (31,211 Vehicles Sold This Month, 143,957 Vehicles Sold This Year)
BMW Group U.S. - Up 3.4% (30,888 Vehicles Sold This Month, 142,469 Vehicles Sold This Year)
American Honda Motor Co. - Up 3.1% (153,069 Vehicles Sold This Month, 641,261 Vehicles Sold This Year)
Kia Motors America - Up 1.6% (59,462 Vehicles Sold This Month, 236,992 Vehicles Sold This Year)
Ford Motor Company - Up 0.7% (242,824 Vehicles Sold This Month, 1,047,056 Vehicles Sold This Year)
Audi of America - Up 0.6% (19,315 Vehicles Sold This Month, 88,471 Vehicles Sold This Year)
Mercedes-Benz USA - Down 0.3% (30,187 Vehicles Sold This Month, 147,283 Vehicles Sold This Year)
Toyota Motor North America - Down 1.3% (215,321 Vehicles Sold This Month, 979,710 Vehicles Sold This Year)
Nissan North America - Down 4.1% (131,832 Vehicles Sold This Month, 635,599 Vehicles Sold This Year)

Brands:
Acura - Down 8% (12,819 Vehicles Sold This Month, 58,121 Vehicles Sold This Year)
Alfa Romeo - Up 4% (2,377 Vehicles Sold This Month, 10,016 Vehicles Sold This Year)
Audi - Up 0.6% (19,315 Vehicles Sold This Month, 88,471 Vehicles Sold This Year)
BMW - Up 3.3% (26,662 Vehicles Sold This Month, 123,979 Vehicles Sold This Year)
Chrysler - Down 18% (14,724 Vehicles Sold This Month, 75,146 Vehicles Sold This Year)
Dodge - Up 4% (46,581 Vehicles Sold This Month, 204,546 Vehicles Sold This Year)
Fiat - Down 46% (1,441 Vehicles Sold This Month, 6,859 Vehicles Sold This Year)
Ford - Up 1% (233,069 Vehicles Sold This Month, 1,006,321 Vehicles Sold This Year)
Genesis - Down 38.6% (1,076 Vehicles Sold This Month, 6,466 Vehicles Sold This Year)
Honda - Up 4.3% (140,250 Vehicles Sold This Month, 583,140 Vehicles Sold This Year)
Hyundai - Up 11.5% (64,980 Vehicles Sold This Month, 264,530 Vehicles Sold This Year)
Infiniti - Down 7.1% (11,625 Vehicles Sold This Month, 61,472 Vehicles Sold This Year)
Jaguar - Down 24% (2,366 Vehicles Sold This Month, 12,434 Vehicles Sold This Year)
Jeep - Up 29% (97,287 Vehicles Sold This Month, 408,033 Vehicles Sold This Year)
Kia - Up 1.6% (59,462 Vehicles Sold This Month, 236,992 Vehicles Sold This Year)
Land Rover - Up 42.3% (7,103 Vehicles Sold This Month, 37,797 Vehicles Sold This Year)
Lexus - Down 0.1% (25,391 Vehicles Sold This Month, 111,250 Vehicles Sold This Year)
Lincoln - Down 5.2% (9,755 Vehicles Sold This Month, 40,735 Vehicles Sold This Year)
Mazda - Up 15.1% (29,980 Vehicles Sold This Month, 137,031 Vehicles Sold This Year)
Mercedes-Benz - Up 0.3% (26,976 Vehicles Sold This Month, 132,657 Vehicles Sold This Year)
Mercedes-Benz Vans - Up 1.1% (3,101 Vehicles Sold This Month, 14,102 Vehicles Sold This Year)
MINI - Up 4% (4,226 Vehicles Sold This Month, 18,490 Vehicles Sold This Year)
Mitsubishi - Up 31.7% (12,416 Vehicles Sold This Month, 56,178 Vehicles Sold This Year)
Nissan - Down 3.8% (120,207 Vehicles Sold This Month, 574,127 Vehicles Sold This Year)
Porsche - Up 4.2% (5,005 Vehicles Sold This Month, 24,529 Vehicles Sold This Year)
Ram Trucks - Up 2% (51,884 Vehicles Sold This Month, 208,612 Vehicles Sold This Year)
Smart - Down 66.8% (110 Vehicles Sold This Month, 524 Vehicles Sold This Year)
Subaru - Up 7.2% (60,146 Vehicles Sold This Month, 263,019 Vehicles Sold This Year)
Toyota - Down 1.5% (189,930 Vehicles Sold This Month, 868,460 Vehicles Sold This Year)
Volkswagen - Up 4% (31,211 Vehicles Sold This Month, 143,957 Vehicles Sold This Year)
Volvo - Up 50.6% (9,338 Vehicles Sold This Month, 37,754 Vehicles Sold This Year)
  • Did April Showers bring May Flowers to Automakers?

Tomorrow will be Fiat Chrysler Automobile's final five year plan being presented under current CEO Sergio Marchionne. We reported on what is expected to be talked about yesterday in the rumor pile. Today, we have gotten a clear picture of what will be presented in the plan.
Automotive News found the schedule for the five-year presentation on a company website before being taken down. The schedule features sections for Jeep, Ram, Maserati, Alfa Romeo, Autonomous Driving and Connectivity, and CO2 reduction. Not listed on the schedule were Chrysler, Dodge, and Fiat. This unsurprisingly sent a number of people into a tizzy as they see this as a possible hint that these brands are going bye-bye. An FCA spokeswoman said Chrysler and Dodge will be talked about in other presentations "as appropriate." We're not sure this inspires confidence.
Source: Automotive News (Subscription Required)
  • Where are they?

President Donald Trump is no fan of German automakers. Take for instance this quote from last January,
He has also made comments about BMW in the past few months in light of possible tariffs (which appear to be going into effect today). Now, new comments have been brought to light where the president wants to try and ban German cars from the U.S.
German magazine Wirtschaftswoche reports that during French President Emmanuel Macron's visit to the U.S. in April, Trump said that he will maintain his current trade policy "until no Mercedes models rolled on Fifth Avenue in New York." This information comes from several unnamed European and U.S. diplomats. At the time of this writing, Reuters hasn't able to verify this information.
As we reported last week, the Trump administration has ordered a probe into new car imports on the basis of national security. It may result in imported vehicles being hit with a 25 percent tariff.
Let's suppose that President Trump somehow presents a ban on German cars, trying to get it implemented may be quite problematic .For one, not all vehicles from German automakers will fall under the ban - an example is the Mercedes-Benz G-Class is built in Austria by Magna-Steyr. German automakers also have a sizable production presence in the U.S. Germany’s auto industry association VDA said German automakers built 804,000 vehicles in the U.S. last year.
One thing is for sure; automakers will be dealing with more uncertainty for some time.
Source: Wirtschaftswoche, Reuters
  • Because automakers really want more uncertainty

(Author's Note: As was pointed out to me on Facebook, the diesel engine is nowhere to be seen on the consumer site or the configurator. Yet, it appears in FCA's media materials. In an email sent this afternoon, Ram Trucks spokesman Nick Cappa said the option has been dropped for 2018. This review has been updated with this new information. -WM)
I’ll admit that I was a bit crazy requesting a 2018 Ram ProMaster van for review. Ever since it was introduced, I have been interested in this rebadged version of the Fiat Ducato van sold elsewhere. Unlike most vans that use a rear-wheel drive layout, the ProMaster uses a front-wheel drive one. I wanted to know if this works for a vehicle designed for work. But I also have an odd curiosity to cargo vans in general as I wondered what it would be like to drive one for a week as my daily driver. This is what I found out.
Function over form best describes the design brief for the Ram ProMaster. The overall profile reminds us of an oversized dustbuster with a steeply raked and short front end and tall sides. Awkward is the kindest word to use on the ProMaster’s front end with the grille placed very low, acres of gray plastic, headlights positioned near the windshield, and a large glass area. The rest of the ProMaster’s design fits in line with other cargo vans with clean sides, split-opening rear doors, and a set of optional wheels. 
The ProMaster offers a wide variety of configurations. With three weight classes, three body styles, and various roof height and length options, you’ll be able to find a van that fit your needs. Our particular tester is one of the popular configurations; a 2500 with the 159-inch wheelbase and high roof option.
Getting inside the ProMaster isn’t tough thanks to wide opening front doors and steps to help you climb up. Once in, you’ll notice one of the key benefits to the ProMaster’s exterior. The large glass area not only makes the interior feel airy, it provides excellent outward visibility. This helps make maneuvering in tight spaces easier.
The design is very utilitarian with a plain look and controls within easy reach of the driver and passenger. There are some clever touches such as the integrated clipboard latch on the top of the dash to hold paperwork and numerous storage spaces. Many surfaces are covered in hard plastics which will hold up to the various work demands being put upon by owners.
One area that will be a major issue for drivers is the seating position. Instead of you sitting in front of the steering wheel, Ram has the wheel set up similar to a school bus or semi-truck where you sit over it. Not helping is the placement of the pedals where you step down instead of push forward. The end result is a driver being in a hunched over position. This could be somewhat alleviated if there was a tilt adjustment for the steering wheel. But Ram only offers a telescoping adjustment. The only way to get a sudo-tilt adjustment is to adjust the angle of the seat.
The seats themselves are perfect for a long workday with excellent support and firm cushioning. It needs to be noted that the ProMaster only offers the bare minimum when it comes to seat adjustments such as angle and position. If you want lumbar adjustments, you need to tick that box on the option list.
All ProMasters come with a 5.3-inch touchscreen with FCA’s UConnect infotainment system. Our test van came with the optional TomTom navigation system. The small screen makes it slightly difficult to look at quickly or use while on the move. We would skip the TomTom navigation system as the graphics are quite dated and it takes some time to process before providing directions. At least the base UConnect system has many of the qualities we like on the larger systems such as a simple user interface and snappy performance.
Step behind the cockpit to enter the massive cargo space. Our particular ProMaster configuration boasted 420 cubic feet of space and max payload of 4,020 pounds. One of the reasons I had requested the van was to get a number of items at my parent’s house to be donated. The van was up to the task by swallowing up everything including a dining room set. The low step-in height, rear-doors that open up 260-degrees, and numerous tie-down points to keep cargo in its place were appreciated.
There are two engines on offer for the ProMaster. We had the base 3.6L V6 producing 280 horsepower and 260 pound-feet of torque. This is paired with a six-speed automatic. There is an optional a 3.0L turbodiesel inline-four with a six-speed automated manual. (No more diesel for 2018 according to FCA). The V6 engine moves the van with no issue even with a large amount of cargo. As for the automatic, it delivers smooth shifts. However, the transmission showed some slowness to change gears. We’re assuming this is due to van only having 350 miles when we took delivery. For those who need a specific setup in the cargo area such as plumbers or painters, Ram offers various uplift packages that include such items as shelving, integrated tool boxes, and dividers.
The low mileage might also explain the fuel economy figure of 15.7 mpg in mostly city driving. No EPA numbers are available due to the van’s gross vehicle weight being above 8,500 pounds.
It is evident that Ram’s prime consideration for the suspension was tuned to deal with heavy loads and not comfort. With the van empty, the ride quality is quite harsh with many bumps making their way inside. Fill up the van and the ride begins to smooth out somewhat. Steering takes a lot of effort as it's very slow and requires a driver to make a number of rotations to do simple turns. There is a fair amount of road and wind noise coming inside the passenger compartment.
If I was to judge the ProMaster like I would with a normal passenger car or SUV, it would be towards the bottom. There is a long list of problems such as the odd driving position, the number of comfort features that are optional, slow steering, and harsh ride. But I need to look at the ProMaster in a different light since it isn’t built for people like me. It is built for people who need a vehicle that can handle holding a lot of cargo or tools, along with being on some sort of worksite for periods at a time. Then the ProMaster begins to show some bright spots. The massive cargo area with the low step-in and tie-down point make it great for deliveries or moving. Using a front-wheel drive setup doesn’t hurt the ProMaster’s capability in terms of payload, and will help the van when the weather becomes terrible like a snowstorm. Finally, the V6 engine is plenty powerful for any situation the ProMaster is in.
While I found the ProMaster to be a bit much to be used a daily driver for me, I can very much see the appeal for those in the commercial market. Just be sure to try the seating position as that will be the item that will influence your decision the most.
Disclaimer: Ram Trucks Provided the ProMaster 2500, Insurance, and One Tank of Gas
Year: 2018
Make: Ram Trucks
Model: ProMaster Cargo
Trim: 2500 159" Wheelbase - High Roof
Engine: 3.6L DOHC 24-Valve V6
Driveline: Six-Speed Automatic, Front-wheel Drive
Horsepower @ RPM: 280 @ 6,400
Torque @ RPM: 260 @ 4,400
Fuel Economy: City/Highway/Combined - N/A
Curb Weight: 4.483 lbs
Location of Manufacture: N/A
Base Price: $35,095
As Tested Price: $43,460 (Includes $1,395 Destination Charge)
Options:
Sliding Driver-Side Door without Glass - $595.00
Trailer Tow Group - $585.00
UConnect 3 Navigation with 5-inch Display - $495.00
16-inch x 6.0-inch Aluminum Wheels - $445.00
Wood Composite Floor - $445.00
Premium Appearance Group - $395.00
Interior Convenience Group - $345.00
ParkSense Rear Park-Assist System - $295.00
Rear Hinged Doors with Deep Tinted Glass - $295.00
Speed Control - $295.00
Upper and Lower Side Wall Paneling Group - $295.00
LED Cargo Areas Light Bars - $285.00
225/75R16C BSW All-Season Tires - $250.00
Driver/Passenger 6-Way Adjustable Lumbar Seats - $245.00
Power Folding/Heated Mirrors - $245.00
Security Alarm - $245.00
DOT Certified Roadside Safety Kit - $195.00
Heated Driver Seat - $195.00
Leather-Wrapped Steering Wheel - $195.00
SiriusXM Sat Radio w/1-Year Subscription - $195.00
Rear Assist Handles - $150.00
Heated Passenger Seat - $145.00
Instrument Panel Bright Bezels - $95.00
12-Volt Rear Auxiliary Power Outlet - $45.00
  • Sadly Not Living Down By the River

Friday will mark the end of an era as Fiat Chrysler Automobiles CEO Sergio Marchionne will present his final five-year plan before he retires next year. Bloomberg has gotten a possible preview of what to expect from various sources.
The overall plan will see FCA focus their resources on "promising niches" instead of competing against such brands as Volkswagen and Toyota in the mass-market. This is possibly seen as a possible plus if FCA was somehow able to partner/merge with another automaker.
Jeep is expected to be the focal point of the new five-year plan. Currently, the brand makes up 70 percent of FCA's profits according to estimates from analysts. Marchionne wants to double the sales of brand by 2022 from 1.4 million vehicles sold last year. To do this, Jeep will expand its presence in Asia, Brazil, and Europe. The lineup will also expand with hybrid models arriving next year. Ram Trucks will also be expanded to other markets around the world. There is also talk about possibly combining Alfa Romeo and Maserati as "a single division in FCA's financial reports." Investors could see as a possible first step to a spinoff.
Meanwhile, Fiat's lineup is expected to be cut down to just 500 and Panda, with sales limited to Europe, Brazil, and emerging markets. This could mean Fiat withdrawing from the U.S. and China due to poor sales. The former could be problem due to dealer contracts. There is also talk about shrinking Chrysler, though we don't know how much smaller it could get aside from just disappearing.
We'll find out more details later this week.
Source: Bloomberg via Automotive News (Subscription Required)
  • A Grand Finale for Marchionne

Care By Volvo is a very intriguing option for buyers. For just $600 or $700 month, you can get into XC40 with insurance, maintenance, replacement of wear items, telematics-based concierge service. The subscription lasts 24 months and provides a yearly allowance of 15,000 miles, along with the option to swap into a new model after 12 months.
But Roadshow reports that Volvo had some issues with getting Care By Volvo up and running. Readers tell the outlet they have been waiting on their vehicles with barely any updates coming from Volvo. Forum and Reddit posts are expressing the same thing with some reporting hold-ups due to paperwork. 
There is some good news for those who ordered a vehicle through Care By Volvo. 
"The first round of paperwork has gone out to several customers and we are on track to deliver the first Care by Volvo cars before month [May] end," said Volvo spokesman Jim Nichols.
Volvo did not reply to Roadshow's inquiries into how many people have signed up for the program, how many XC40s have been delivered, or how many people are still waiting for their vehicles. We may have an answer to the first inquiry thanks to a Reddit poster who wrote this,
While Volvo is still ironing out the various issues with Care, they are planning to add the new V60 and upcoming S60 in the near future.
Source: Roadshow
  • You doing ok Volvo?

Nissan's goal in the U.S. for quite some time was increasing its market share. To do this, the company piled on the incentives and sold more vehicles to rental car fleets. While fine in the short-term, the long-term effects would hurt profitability and brand image. This isn't helped by sales declining 6.5 percent this year and a growing supply of vehicles on dealers - Kelly Blue Book reports an 88-day supply of Nissan vehicles.
Nissan is changing its plan for the U.S. Back at the 2018 NADA Show in April, Nissan's U.S. sales chief Dan Mohnke told dealers the company would focus on boosting profitability by reducing inventory. One way to do that is cutting back on production.
The Nikkei Asian Review reports Nissan is slashing production as much as 20% at their North American plants. The cuts are already taking place at Nissan's two plants in the U.S. (Canton and Smyrna, TN) and three in Mexico. No layoffs are expected, instead, workers will have an extra day or two off of work. The cuts are expected to end in the fall when production of the next-generation Altima kicks off. It is expected that the production cut will drop Nissan's U.S. sales for the year by three percent.
Source: Nikkei Asian Review
  • Profit over market share

Since 2014, there have been numerous rumors about Apple's self-driving project known as Titan. At one time, the project had a 1,000 workers with the goal of designing and building a self-driving electric vehicle. But numerous issues and changes in vision has caused the project to be majorly behind scheduled. A new report from the New York Times shines a light at the current circumstances.
According to sources with knowledge of the project, Apple signed a deal with Volkswagen late last year that would see the automaker provide less than two dozen of T6 Transporter vans to the technology company. Apple will equip the vans with their self-driving tech and be used as shuttles around their Cupertino base. The sources say the vans are "consuming nearly all of the Apple car team’s attention". A number of former Apple employees added that the project "lacked a clear plan beyond the vans, including any near-term commercial goals."
Volkswagen wasn't Apple's first choice for an automaker partner. BMW and Mercedes-Benz were the tech company's first and second choices. Various discussions would be held with both German automakers, but would ultimately go no-where as they balked at Apple's request "to hand over control of the data and design." Other automakers were spoken to, but wouldn't go far as automakers were not ready to give up control or Apple wanted " a more attractive partner." Volkswagen, however, jumped at the chance, as it was seen as a way to help improve their reputation after the diesel emission mess.
It's unclear whether this deal will only be for the vans or extend further. 
Source: New York Times
  • Very much an odd couple

Last year, the final Dodge Viper rolled down the Conner Avenue assembly line. The vehicle would once again enter the history books as one of the maddest sports cars. But a new report says the Viper will be making a comeback, albeit with some major changes.
Car and Driver has posted their '25 Cars Worth Waiting For: 2019–2022' piece and the Dodge Viper is on the list. The new model will retain its front-engine, rear-drive layout and spaceframe with independent suspensions front and rear. Extensive use of aluminum and carbon fiber will help keep weight down. 
One disappointment for Viper fans is the new model not having a V10. Instead, FCA is developing a new aluminum-block V8. A 550 horsepower naturally-aspirated version will serve as the base, with a more potent 700 horsepower supercharged variant to follow. A manual transmission of some sort is expected.
Car and Driver predict that Dodge will show off the Viper at next year's Detroit Auto Show - which marks the 30th anniversary of the introduction of the original Viper. Production is expected to begin in late 2020 beginning with the convertible. The coupe is expected to follow a few years later.
Car and Driver is quite confident, going as far to say "trust us: A new Viper is happening." We need some more evidence and possibly some spy photos before we hop aboard this train.
Source: Car and Driver
  • Rising from the dead once again

The lengths that automakers go to with camouflaging vehicles continues to amaze us. Case in point, the first spy photos of the next-generation Chevrolet Suburban has hit the internet. General Motors has covered up every surface, including the underside. That's because the new Suburban appears to be ditching the solid rear axle for an independent setup. We know this as a spy photographer found the right spot where there was minimal camouflage and captured it.
Why is Chevrolet switching to an IRS setup? It might have to do with the new Ford Expedition which moved to independent rear suspension. A source told Autoblog that Chevrolet wouldn't have fit IRS because it was expensive, but plans changed when the Expedition made a big splash with it. Of course, IRS could have been in the cards for some time. Nevertheless, this setup will help improve ride quality significantly.
Engines are expected to mirror the new Silverado, which might include the new turbocharged 2.7 four-cylinder.
Source: Autoblog, CarScoops
  • Major changes for the suspension

Before the new Corolla hatchback hits dealers later this summer, Toyota has revealed pricing and fuel economy numbers.
The base SE will set you back $20,910 (includes a $920 destination charge), while the XSE begins at $23,910. That will net you a new 2.0L four-cylinder with 168 horsepower and a six-speed manual. A CVT is available for an additional $1,100.
This is what you get on either trim:
SE:  Toyota Safety Sense 2.0 with automatic emergency braking with pedestrian detection, adaptive cruise control, and lane departure warning; 8-inch touchscreen with Apple CarPlay compatibility, and 16-inch wheels. XSE: 18-inch wheels, LED fog lamps, upgraded infotainment system, leather-and-fabric upholstery, and heated front seats.  As for fuel economy, the SE with the CVT is the mileage leader with EPA estimates of 32 City/42 Highway/36 Combined. The XSE CVT is next with figures of 30/38/33. For the manual, Toyota only has figures for the SE which are 28/37/31. Numbers on the XSE manual are coming soon.
Source: Toyota
  • Also, we have fuel economy figures

Is it possible to teach an old car new tricks? That’s the question Chrysler believes it has answered with the 2018 300. The current-generation model has been with since 2012, though the platform it uses goes back to nineties. Chrysler has been making various improvements to it with an updated look, new transmission, and revised trims. Spending a week with the 2018 300S, I found there were a number of things that make it a worthy contender. But there were some issues that made me leery of fully recommending this model.
Somehow, the Chrysler 300’s design just gets better with age. The boxy shape of the body is complemented by a large mesh grille, slim headlights, and a clean looking rear. The S trim adds a hint of aggression with side skirts, rear spoiler, and multi-spoke 20-inch wheels. The green color and bronze trim pieces on this vehicle received a number of comments from the peanut gallery during my week. They ranged from what 1940’s army base did the 300 come from to some comparing it to appliances from the late sixties to early seventies. While I do applaud the chutzpah of the person who decided to go with this combination, I think the bronze accents are a bit much. Thankfully, they are an option and one I recommend skipping. Inside, the 300 isn’t aging so well. Most of the interior is fitted with cheap and somewhat flimsy plastics, very disappointing on a vehicle with a nearly $50,000 price tag. The soft-touch plastic used on the dashboard looks somewhat out of place with its textured pattern. For 2018, the 300 gets the new UConnect 4 system. The key changes are updated graphics and compatibility with Apple CarPlay and Android Auto. Thankfully, the updated UConnect system retains the logical layout with large touchscreen buttons and menu structure that we like so much. Our 300S tester came equipped with the base 3.6L V6 engine. Unlike most 300s equipped with this engine, the S gets slightly more power (300 horsepower and 284 pound-feet vs. 292 and 280). This is paired with an eight-speed automatic and optional all-wheel drive. Rear-wheel drive comes standard. Despite the small boost in power, the V6 in the 300S feels similar to other 300s and Dodge Charger/Challengers we have driven. On paper, the V6 is somewhat slow to the competition with a 0-60 time of over six seconds. But on the road, it doesn’t show any sign of sluggishness. There is enough power for most driving situations such as making a pass or leaving a stoplight. This is likely helped by the eight-speed automatic which provides quick and smooth shifts. Fuel economy is slightly disappointing if you opt for the AWD with EPA figures of 18 City/27 Highway/21 Combined. My average for the week landed around 20.4 mpg on a 50/50 mix of city and highway driving. S models differ from other 300s in the suspension. Chrysler uses a stiffer setup on the S to improve handling. It does show a marked improvement with less body lean and the chassis is willing to play. But it isn’t a vehicle you want to push around as the 300’s weight is very noticeable when cornering. The stiffer suspension will mean a slightly rougher ride. The 20-inch wheels that come standard on the S doesn’t help matters. As I mentioned earlier, this particular 300S is quite expensive with an as-tested price of $49,660 with destination. It isn’t worth the money considering you can get into a well-optioned Buick LaCrosse or Kia Cadenza for similar prices and feel you got your money’s worth. Also, Dodge offers the Charger R/T Scat Pack and Daytona 392 with 6.4L V8 that provide more performance for less money. Disclaimer: Chrysler Provided the 300S AWD, Insurance, and One Tank of Gas
Year: 2018
Make: Chrysler
Model: 300
Trim: S AWD
Engine: 3.6L DOHC 24-Valve V6
Driveline: Eight-Speed Automatic, All-Wheel Drive
Horsepower @ RPM: 300 @ 6,350
Torque @ RPM: 264 @ 4,800
Fuel Economy: City/Highway/Combined - 18/27/21
Curb Weight: 4,267 lbs
Location of Manufacture: Brampton, Ontario
Base Price: $38,295
As Tested Price: $49,660 (Includes $1,095 Destination Charge)
Options:
300S Premium Group - $3,495
300S Premium Group 2 - $1,895
SafetyTec Plus Group - $1,695
S Model Appearance Group - $1,495
Beats Audio Group - $995
300S Alloy Package - $695
  • This old full-size sedan

If you happen to have a pre-production Honda Civic Type R just sitting around, what would you do with it? If you happen to an engineer in special projects division at Honda's Swindon plant in the U.K., you decide to make it into a pickup.
Codenamed ‘Project P’, the Type R pickup made its debut at the Society of Motor Manufacturers and Traders (SMMT) Test Day. To create this truck, the special projects division changed everything from the b-pillar to the back to install a bed with diamond-plate metal bed and a set of rollbars. The big rear wing is retained.
The rest of the vehicle is pretty much identical to the standard Type R with a turbocharged 2.0L inline-four producing 306 horsepower, six-speed manual transmission, and adaptive suspension. Honda says the truck can hit 60 mph in 6.5 seconds and hit a top speed of 165 mph - just 5 mph slower than the standard Civic Type R.
"We have a special projects division at the factory in Swindon and this project was a fantastic opportunity for the team to show just what their creative minds could do. The passion that our engineers have for Honda is shown in our latest creation and we are even considering taking it to the Nurburgring to see if we can take the record for the fastest front wheel drive pickup truck!” said Alyn James, project lead.
Before someone asks, Honda explicitly states in the press release "no plans to put the concept into production."
Source: Honda


Honda Reveals Civic Type R Pickup Truck concept at SMMT Test Day
Created by the team behind Synchro Motorsport at the Swindon factory Potentially one of the fastest pickup trucks on UK roads No plans to put concept into production Honda UK has stolen the show at the annual SMMT Test Day this year by showcasing a Civic Type R Pickup Truck concept, almost a year after the launch of the standard road car.
Built by a specialist team from the Product Engineering department at the Honda of the UK Manufacturing (HUM) factory in Swindon and codenamed ‘Project P’, the Civic Type R Pickup Truck has been modified and developed from the standard road car to create potentially one of the fastest pickup trucks on UK roads.
To create the Project P concept, the team used a pre-production version and adapted the design rearwards from the B-pillars of the car, with sweeping lines from the roofline to the back hiding a flatbed loading area in the centre of the car where the rear seats and boot space would normally be.
Finished in Rallye Red, the concept retains the iconic rear wing associated with both the FK2 and FK8 Civic Type R, which, in a clever piece of engineering, is movable to allow direct and unfettered access to the rear of the truck.
Using the same powertrain, suspension and gearbox as the standard road car, it is estimated Project P will complete the 0-62mph sprint in under six seconds and reach a top speed of over 165mph. It also possesses the same driving modes of comfort, Sport and +R, Project P offering both ride comfort as well as a unique racing capability on track.
Alyn James, project lead, commented: “We have a special projects division at the factory in Swindon and this project was a fantastic opportunity for the team to show just what their creative minds could do. The passion that our engineers have for Honda is shown in our latest creation and we are even considering taking it to the Nurburgring to see if we can take the record for the fastest front wheel drive pickup truck!”
Phil Webb, head of car at Honda UK, added: “This Civic Type R Pickup Truck concept by the special team at our Swindon-based plant demonstrates the passion and commitment of the team there – going above and beyond outside working hours to deliver the final product. There are no plans to put this in to production but we will be using it to transport our lawn and garden products as and when required!”
  • This is madness we can get behind

Automakers already have enough of a headache with the current administration in the white house, but news that broke today is only going to make it even worse.
Wilbur Ross, the U.S. Secretary of Commerce has announced that President Donald ordered an investigation under Section 232 of the Trade Expansion Act of 1962 to determine "whether imports of automobiles, including SUVs, vans and light trucks, and automotive parts into the United States threaten to impair the national security."
"There is evidence suggesting that, for decades, imports from abroad have eroded our domestic auto industry. The Department of Commerce will conduct a thorough, fair and transparent investigation into whether such imports are weakening our internal economy," said Ross in a statement.
There's also this interesting bit in the statement,
The Wall Street Journal reported yesterday that tariffs as high as 25 percent could be slapped on new cars. Currently, the tariff on imported vehicles is at 2.5 percent. Imported trucks are already hit with a 25 percent tariff via the chicken tax.
There are a couple likely reasons for this investigation,
Mid-term elections are coming up and this is seen as a way to court voters in the heartland with the promise of bringing back jobs to the U.S. Possibly being used as leverage in negotiations with Canada and Mexico over the North American Free Trade Agreement (NAFTA); the European Union, and China. This investigation could hurt Mexico the most as they are the largest source of U.S. auto imports - delivering just under $50 billion of imports last year. As for automakers, Bloomberg reports that Jaguar Land Rover, Mazda, and Mitsubishi would be the most affected as all of their vehicles are imported. The news sent the stock prices of foreign automakers downward. Shares in Mazda dropped 5.2 percent at the close of trade in Japan, while Daimler and BMW saw their stock price drop more than two percent.
This announcement has gotten condemnation from various governments, trade groups, analysts, and automakers. Here are just a few.
"China opposes the abuse of national security clauses, which will seriously damage multilateral trade systems and disrupt normal international trade order," said Gao Feng, spokesman at the Ministry of Commerce in China during a regular press briefing.
"We will closely monitor the situation under the U.S. probe and fully evaluate the possible impact and resolutely defend our own legitimate interests."
“We have to consider this as something of a provocation. I have the growing impression that the U.S. no longer believes in the competition of ideas, but only the law of power. It fills me with grave concern,” said Eric Schweitzer, president of the Association of German Chambers of Commerce and Industry.
“The U.S. auto industry is thriving and growing. To our knowledge, no one is asking for this protection. This path leads inevitably to fewer choices and higher prices for cars and trucks in America,” said  John Bozzella, CEO of the Association of Global Automakers, a trade group that represents Hyundai, Nissan, Toyota, and others.
Source: Automotive News (Subscription Required), Bloomberg, Reuters, Wall Street Journal (Subscription Required), U.S. Department of Commerce


U.S. Department of Commerce Initiates Section 232 Investigation into Auto Imports
Today, following a conversation with President Donald J. Trump,  U.S. Secretary of Commerce Wilbur Ross initiated an investigation under Section 232 of the Trade Expansion Act of 1962, as amended.  The investigation will determine whether imports of automobiles, including SUVs, vans and light trucks, and automotive parts into the United States threaten to impair the national security as defined in Section 232.  Secretary Ross sent a letter to Secretary of Defense James Mattis informing him of the investigation.
“There is evidence suggesting that, for decades, imports from abroad have eroded our domestic auto industry,” said Secretary Ross. “The Department of Commerce will conduct a thorough, fair, and transparent investigation into whether such imports are weakening our internal economy and may impair the national security.” 
During the past 20 years, imports of passenger vehicles have grown from 32 percent of cars sold in the United States to 48 percent.   From 1990 to 2017, employment in motor vehicle production declined by 22 percent, even though Americans are continuing to purchase automobiles at record levels.  Now, American owned vehicle manufacturers in the United States account for only 20 percent of global research and development in the automobile sector, and American auto part manufacturers account for only 7 percent in that industry.  
Automobile manufacturing has long been a significant source of American technological innovation. This investigation will consider whether the decline of domestic automobile and automotive parts production threatens to weaken the internal economy of the United States, including by potentially reducing research, development, and jobs for skilled workers in connected vehicle systems, autonomous vehicles, fuel cells, electric motors and storage, advanced manufacturing processes, and other cutting-edge technologies.  
Following today’s announcement, the Department of Commerce will investigate these and other issues to determine whether imports of automobiles and automotive parts threaten to impair the national security.  A notice will be published shortly in the Federal Register announcing a hearing date and inviting comment from industry and the public to assist in the investigation.
  • May lead to tariffs and other issues

Last week, Kia announced a new 48-volt mild-hybrid system that would be paired up with a diesel engine to improve performance and emissions. The first model will be the European-market Sportage. Today, Kia has unveiled a lightly refreshed Sportage with minor updates and more information on the mild-hybrid system.
Exterior changes are quite small with new bumpers and headlights. The top GT-Line comes with new chrome trim and metallic skid plates. Inside, Kia has fitted a new steering wheel and instrument cluster. For safety, the 2019 Sportage gets Kia's Smart Cruise Control with Stop & Go, around-view camera system, and a driver attention warning.
As for the mild-hybrid powertrain, it will come paired with a 2.0L ‘R’ diesel four-cylinder. No power figures or fuel economy figures were provided by Kia. The company also announced a new 1.6L diesel that will take the place of the 1.7. 
Kia will launch the 2019 Sportage in Europe in the next quarter. We're expecting Kia to do something similar to the U.S. Sportage, minus the diesel mild-hybrid engine. But it should be noted that Kia is working on a mild-hybrid system for gas engines, so our updated Sportage could have a mild-hybrid powertrain of its own.
Source: Kia


KIA UNVEILS NEW SPORTAGE WITH DIESEL MILD-HYBRID POWERTRAIN, NEW TECHNOLOGIES AND FRESH DESIGN
Wednesday, 23 May 2018
Updated interior and exterior design for UK and global best-seller Revised powertrain line-up includes EcoDynamics+ 2.0-litre diesel mild-hybrid and efficient new 1.6-litre ‘U3’ diesel EcoDynamics+ powertrain reduces CO2 emissions by up to four per cent under WLTP New technologies include upgraded infotainment and active driver aids On-sale in Europe during Q3 2018 Kia Motors has revealed the New Kia Sportage, introducing a range of enhancements to the brand’s UK, European and global best-seller. The new model pairs an updated exterior and interior design with new safety and infotainment technologies. Powertrains are also fully-compliant with future emissions standards.
The Sportage’s advanced new EcoDynamic+ 48V diesel mild-hybrid powertrain is the first to be launched as part of the brand’s global powertrain electrification strategy. Kia is the first manufacturer to offer hybrid, plug-in hybrid, battery-electric and 48-volt mild-hybrid technology across its full model line-up. Kia will launch 16 advanced powertrain vehicles by 2025, including five new hybrids, five plug-in hybrids, five battery-electric vehicles and, in 2020, a new fuel-cell electric vehicle.
Kia sold more than 131,000 examples of the Sportage in 2017, representing a quarter of the brand’s total European sales. In the UK, the Sportage continues to be the brand’s biggest seller with 39,683 delivered to customers in 2017, making up over a third of UK sales last year. Updates to the Sportage range also include modifications to ‘GT-Line’ models. European customer deliveries of the new model will start during Q3 2018.
Upgraded powertrains include new EcoDynamics+ diesel mild-hybrid
The Sportage now offers a wider range of engines, including Kia’s new ‘EcoDynamics+’ 2.0-litre ‘R’ diesel mild-hybrid powertrain. EcoDynamics+ supplements acceleration with power from a 48-volt battery, and extends engine ‘off time’ with a new Mild-Hybrid Starter-Generator unit. It can reduce CO2 emissions by up to four per cent on the Worldwide harmonized Light vehicles Test Procedure (WLTP).
The Sportage’s existing 1.7-litre CRDi (Common-Rail Direct injection) diesel engine has been replaced with Kia’s efficient new 1.6-litre ‘U3’ CRDi engine, the cleanest diesel engine Kia has ever made. The new 1.6-litre diesel engine produces 115 or 136ps, with higher-powered models available with all-wheel drive and seven-speed double-clutch transmission.
All powertrains are now fully compliant with the Euro 6d TEMP emissions standards.
Updates to attractive Kia SUV design
Improvements to the Sportage’s sporty exterior design include new front and rear bumpers, as well as redesigned front and rear lamps and new 16-, 17- and 19-inch alloy wheel designs. Options include chrome sill trim and metallic skid plates, and five new paint colours.
‘GT-Line’ models are equipped with a gloss black hot-stamped radiator grille, a gloss black and silver skid plate, and dark chrome inserts on the side sills and rear tailgate. The GT-Line’s unique 19-inch alloy wheels have been redesigned, and all models are fitted with a dual exhaust rear valance and revised ‘ice cube’ LED fog lamp designs.
The newly-refined cabin features a new steering wheel and revised instrument cluster, as well as new black-and-grey two-tone upholstery. ‘GT-Line’ models are available with new black-and-grey two-tone leather seats, or optional black leather with red accents.
Smart safety technologies and new infotainment systems
The new Sportage adopts Kia’s latest advanced driving assistance systems, including Smart Cruise Control with Stop&Go, an Around View Monitor for easier parking manoeuvres, and Driver Attention Warning, to combat fatigue and inattentiveness at the wheel. European customers have a choice of Kia’s new infotainment systems: a 7.0-inch touchscreen, or a new ‘frameless’ 8.0-inch infotainment system.
UK on-sale date, pricing and specification will be announced in due course.
  • Could we be seeing something like this in the U.S. in the future?

There has been a lot of talk about driverless cars with companies (both automotive and tech) promising a safe and grandiose future and a number of high-profile crashes that have resulted in fatalities. This got us wondering how the general public feels about them. Recently, two studies came asking this and their results are very interesting.
First up is CarGurus which asked 1,873 vehicle owners in the U.S. between the ages of 18 to 65 about self-driving vehicles. 79 percent of participants said they were not excited about owning a self-driving car. 84 percent said they were unlikely to own a self-driving car in the next five years. This number drops to 59 percent when the window is extended to ten years.
Here's where it gets interesting:
In terms of geographical areas, owners on the West Coast are the most excited at 26 percent. The least, those in Central U.S. at 18 percent. When it comes to brands, BMW owners lead the pack when asked if they would consider a self-driving vehicle from their brand - 55 percent. Least likely? That would be Chrysler owners at 23 percent Safety is the key reasons that owners are excited and concerned about self-driving cars - 64 and 81 percent respectively. When asked what company is most trusted to develop self-driving cars, 27 percent of participants said none. Second and a bit of surprise was Tesla at 24 percent. (We're wondering if this survey was done before the fatal crash of a Tesla Model X on Autopilot in late March) The second study comes to us from AAA which asked people how trustful are you of self-driving cars. 73 percent said they would be too afraid to ride in an autonomous car, up from 63 percent in late 2017. Additionally, 63 percent of those asked said they would feel less safe either walking or on a bike if there is a self-driving vehicle. We have to assume that the fatal crash involving an Uber autonomous vehicle made this number rise.
AAA's study also found a big surprise. Millenials, a group that is quick to accept new technologies, are not as trusting as they once were. In late 2007, 49 percent said they were afraid to ride in an autonomous vehicle. Now, that number rose to 64 percent.

“Despite their potential to make our roads safer in the long run, consumers have high expectations for safety. Our results show that any incident involving an autonomous vehicle is likely to shake consumer trust, which is a critical component to the widespread acceptance of autonomous vehicles,” said Greg Brannon, AAA’s director of Automotive Engineering and Industry Relations.
Source: Roadshow, AAA


AAA: American Trust in Autonomous Vehicles Slips
ORLANDO, Fla. (May 22, 2018) – Following high-profile incidents involving autonomous vehicle technologies, a new report from AAA’s multi-year tracking study indicates that consumer trust in these vehicles has quickly eroded. Today, three-quarters (73 percent) of American drivers report they would be too afraid to ride in a fully self-driving vehicle, up significantly from 63 percent in late 2017. Additionally, two-thirds (63 percent) of U.S. adults report they would actually feel less safe sharing the road with a self-driving vehicle while walking or riding a bicycle.
“Despite their potential to make our roads safer in the long run, consumers have high expectations for safety,” said Greg Brannon, AAA’s director of Automotive Engineering and Industry Relations. “Our results show that any incident involving an autonomous vehicle is likely to shake consumer trust, which is a critical component to the widespread acceptance of autonomous vehicles.”
Surprisingly, AAA’s latest survey found that Millennials – the group that has been the quickest to embrace automated vehicle technologies — were the most impacted by these incidents. The percentage of Millennial drivers too afraid to ride in a fully self-driving vehicle has jumped from 49 percent to 64 percent since late 2017, representing the largest increase of any generation surveyed.
“While autonomous vehicles are being tested, there’s always a chance that they will fail or encounter a situation that challenges even the most advanced system,” said Megan Foster, AAA’s director of Federal Affairs. “To ease fears, there must be safeguards in place to protect vehicle occupants and the motorists, bicyclists, and pedestrians with whom they share the road.”
AAA supports thorough testing of automated vehicle technologies as they continue to evolve, including testing under progressively complicated driving scenarios and under varying conditions, but not at the expense of safety. Additionally, to help prevent the accidental misuse of the systems, AAA advocates for a common sense, common nomenclature and classification system, and similar performance characteristics of future autonomous vehicle technologies.
“There are sometimes dozens of different marketing names for today’s safety systems,” continued Brannon. “Learning how to operate a vehicle equipped with semi-autonomous technology is challenging enough without having to decipher the equipment list and corresponding level of autonomy.”
To help educate consumers on the effectiveness of emerging vehicle technologies, AAA is committed to the ongoing, unbiased testing of automated vehicle technologies. Previous testing of automatic emergency braking, adaptive cruise control, self-parking technology and lane keeping systems has shown both great promise and great variation. Future AAA testing will look at how well systems work together to achieve higher levels of automation.
  • Both have some interesting results

Ford's announcement of dropping most of their lineup of traditional cars likely caused a number of automakers to consider doing something similar. One automaker that will not be doing this is Subaru.
Dominick Infante, Subaru’s national manager of product communications told Motor Trend one of the key reasons they keeping traditional cars is increasing gas prices.
“Gas prices are starting to come up now. So a good hedge for better economy is having a sedan,” said Infante.
“So we still make the Impreza and the Impreza hatchback. They do get better gas mileage than say a comparable CUV like the Crosstrek so we do sell those so if the market does change that’ll help sales of sedans.”
Subaru's entry-level Impreza helps bring first-buyers in and performance models like the WRX/STI and BRZ draw in customers in their late 20s and early 30s.
Still, Subaru's car lineup is taking it on the chin. Here are the sales numbers through April,
Impreza: 22,287 (Down 16.3% YTD)
Legacy: 14,730 (Down 13.9% YTD)
WRX/STI: 9,854 (Down 8.2% YTD)
BRZ: 1,286 (Down 10.1% YTD)
Their crossover lineup is doing slightly better. Again, here are the sales numbers through April,
Crosstrek: 45,728 (Up 66.6% YTD)
Outback: 58,205 (Up 2% YTD)
Forester: 50,783 (Down 9.7% YTD)
Source: Motor Trend
  • Subaru isn't planning to drop their car lineup anytime soon

One of the key materials used in electric car batteries is cobalt. But there are growing concerns that the supply of cobalt is getting scarce as more and more automakers begin building electric cars.
A new report from Bloomberg New Energy Finance says cobalt shortages are expected to happen earlier than previously forecast. This issue possibly brings a big challenge to the rollout of electric vehicles over the next five to seven years.
"The long lead time to bring on new mines and the concentration of cobalt reserves in the Democratic Republic of the Congo mean there is a real possibility of supply shocks in the early 2020s," analysts from BNEF wrote.
"If capacity does not grow as planned, cobalt prices could continue to spike and there could be a major cobalt shortage. This would have serious implications on the electric vehicle market."
The price of cobalt has tripled within the past two years as more automakers begin building electric vehicles. Peter Deneen, the managing director at consultancy EV-Metals Resources Group said in an email that the market price for cobalt has risen in the "prospect of supply constraints". But the price doesn't include the potential risk of political upheaval in the Democratic Republic of the Congo - accounts for more than two-thirds of mined cobalt.
Concerns have automakers accelerating development of batteries that have smaller amounts of cobalt. Chinese automaker BYD is expected to introduce batteries that have a nickel-manganese-cobalt ratio of 8:1:1 by the end of this year. BMW is expected to follow in 2021 with a similar ratio. According to BNEF's report, this chemistry will account for 57 percent of EV batteries by 2030.
There is also the idea of recycling batteries that could provide 100,000 metric tons of cobalt a year by 2030. But the amount would have to mean all batteries from consumer electronics are recycled. Currently, the recycling rates around between 25 to 50 percent according to the report.
Source: Bloomberg via Automotive News (Subscription Required)
  • More electric vehicles mean more cobalt supply problems

Before the start of this year's Detroit Auto Show, Ford held a press conference revealing new models such as the new Bullitt Mustang and Ranger. But they also teased a new electric crossover wearing an iconic name - Mach 1. The only details provided by Ford is that it would provide a range of 300 miles and launch in 2020. A new report from Autocar has some possible new details on the vehicle.
The Mach 1 crossover currently has the codename of CX430 and will likely have some design cues inspired by the Mustang. Underpinning the model will be Ford's C2 platform. Currently, this platform is being used for the next-generation Focus and Escape crossover.
The Mach 1 is part of Ford's plan to launch 16 electric vehicles by 2022.
Source: Autocar
  • Some will be disappointed by the platform choice

While the spotlight has been on crossovers and their upcoming EV, Jaguar is still committed to building sports cars.
“The F-Type has been a huge success. We love sports cars – and I use the plural quite deliberately. Whether that is delivered by a body variant or something else remains to be seen, but for now let’s just say that the body type is very important for us,” said Hanno Kirner, the person overseeing product strategy at Jaguar Land Rover.
Emphasis mine. Jaguar only has one sports car at the moment - the F-Type. But according to Autocar, a second coupe being the successor to the XK (departed Jaguar's lineup in 2014). Some of their evidence comes from comments made by Jaguar’s head of design, Ian Callum last year.
“I want a two-seater [the F-Type] and a 2+2. We’re working on something now. There’s nothing approved, but we instigate in design.”
Reportedly, Callum's team completed a design concept for an XK replacement but was scrapped when Jaguar killed the XK.
Autocar says this new successor to the XK isn't expected until after 2021. Part of this comes down to a new modular platform that is currently being worked on and will debut on the next-generation F-Type - due in 2019. This new platform is reportedly flexible enough to do a 2+2 coupe. Jaguar's Ingenium engine family will provide power for both models and expect some hot versions, including an SVR variant down the road. There is also talk about electrification, but that appears to be a long way out.
Source: Autocar
  • F-Type might not be Jaguar's sole coupe anymore

Fiat Chrysler Automobiles finds itself in a fair amount of hot water over the use of defeat devices in the 3.0L EcoDiesel used in the Ram 1500 and Jeep Grand Cherokee with various lawsuits. But that water could become hotter as newly unsealed documents reveal FCA's suppliers discussed the use of illegal software back in 2010.
Sergio Pasini, the controls and calibration director at supplier VM Motori wrote in an email that FCA wanted to use software in their diesel engine that could detect when a vehicle was undergoing emission tests and activate emission controls. 
The software known as 't_engine' "is, no matter what Fiat says, a cycle detection," Pasini wrote in the email.
The lawsuit also alleges that another supplier, Robert Bosch GmbH, warned VM Motori about 't_engine' and that they could face “serious penalties” if it was discovered by regulators. Bosch it should be noted is under investigation for its involvement in the Volkswagen diesel emission scandal.
The documents are part of a proposed class-action lawsuit filed against FCA in San Fransisco which alleges the company misled buyers of the EcoDiesel by "touting the fuel economy and performance of its EcoDiesel engines while cheating on emissions tests to win regulatory approval."
“We continue to cooperate with various governmental investigations related to diesel emissions, and emails such as those referenced have been previously provided to the agencies. It is inappropriate to draw conclusions from isolated communications and internal deliberations, without the more detailed context that is part of the reviews FCA is conducting as part of the investigation process,” FCA wrote in an email statement.
Source: Automotive News (Subscription Required)
  • Dates back to 2010

.Over the weekend, Tesla CEO Elon Musk took to Twitter and announced a new powerful version of the Model 3. The version according to Musk will cost $78,000 and will be "quicker & with better handling.
The last line of Musk's tweet made us chuckle since the current Model 3 warranty doesn't permit racing and autocross.
Nevertheless, it has brought up questions as to where the $35,000 Model 3 is. For a number of buyers who plopped down the $1,000 deposit, this is the model they are waiting for. Musk gave a roundabout answer to where the low-priced Model 3 is.
There is some truth to Musk's madness. Tesla is burning through cash like it is going out of style. According to Bloomberg, the company used up more than a billion in the first quarter. One way Tesla raises money is rolling out their most expensive variants of the Model S, X, and 3. Once they have enough cash, they will begin production of less expensive models.
But the Model 3 has proven to be very problematic for Tesla. Various delays and production issues have caused Tesla to push back production targets for the Model 3 again and again. Tesla is aiming to produce 5,000 Model 3s a week by the end of the second quarter.
“The idea that it’s supposed to be a car for everyone is kind of laughable. Anyone who wanted a base model may have to wait years out,” said Ivan Drury, senior manager of industry analysis at Edmunds.com.
Source: Bloomberg (Subscription Required)
  • Where's the mystical $35,000 Model 3?

Fiat Chrysler Automobiles' CEO Sergio Marchionne will be making one final move before his retirement - ending production of mass-market vehicles in Italy.
Sources tell Bloomberg that on June 1st, Marchionne will unveil a plan that will see the end of production for the Alfa Romeo MiTo and Fiat Punto to make way for more upscale models. Fiat's historic plant in Turin will be retooled to build a new smaller Maserati SUV alongside the Levante. Another plant nearby Naples will be home to a small Jeep SUV after production of the Fiat Panda moves to Poland. It should be noted that the plan isn't finalized and details could change. FCA declined to comment when reached by Bloomberg.
Part of the reason for the change comes down to Marchionne's belief that there is no future in building affordable cars in high-wage European countries. 
The report also mentions that FCA will be cutting Fiat's lineup to just the 500 and Panda in the future
Source: Bloomberg
  • Changes afoot

Chevrolet has spilled a bit more information on the upcoming 2019 Silverado's powertrain lineup. The big story is a new turbocharged 2.7L four-cylinder becoming the base engine for the volume LT and new RST trims. We'll give you a moment to work through the shock that you're most likely experiencing.
The 2.7 is rated at 310 horsepower and 348 pound-feet of torque. The torque figure is impressive when you consider that the 4.3L V6 (now relegated to the W/T, Custom, and Custom Trail Boss trims) produces 22 percent less torque. 0-60 mph is said to take under seven seconds. This engine can also run on just two cylinders. No word on fuel economy, but we wouldn't be surprised if this engine is close to the top in terms of the Silverado's powertrain lineup.
The complete list of powertrain options available on the 2019 Chevrolet Silverado
4.3L V6, 6-Speed Automatic: 285 horsepower and 305 pound-feet of torque Turbocharged 2.7L 4-Cylinder, 8-Speed Automatic: 310 horsepower and 348 pound-feet of torque 5.3L V8, 6- or 8-Speed Automatic: 355 horsepower and 383 pound-feet of torque 3.0L Turbodiesel I-6, 10-Speed Automatic: TBD 6.2L V8, 10-Speed Automatic: 420 horsepower and 460 pound-feet of torque “A major focus of the next-generation Silverado is expanding the range of choices. With all-new engines and a broader model range, there’s a Silverado for everyone, whether you’re buying your first pickup or your tenth,” said Tim Asoklis, chief engineer for the Silverado 1500.
Source: Chevrolet
A SILVERADO — AND AN ENGINE — FOR EVERY NEED
The all-new 2019 Silverado 1500 offers six engine and transmission combinations, including an all-new 2.7L Turbo, and V-8 engines with industry-first Dynamic Fuel Management offering 17 different modes of cylinder deactivation DETROIT — With eight trims paired with six engine/transmission combinations, even more customers will find a 2019 Silverado 1500 perfectly tailored to their needs for performance, efficiency, technology and value.
“A major focus of the next-generation Silverado is expanding the range of choices,” said Tim Asoklis, chief engineer for the Silverado 1500. “With all-new engines and a broader model range, there’s a Silverado for everyone, whether you’re buying your first pickup or your tenth.”
The all-new 2019 Silverado 1500 propulsion lineup includes:  
Over half of the models will be equipped with the most advanced V-8s in the brand’s history: updated versions of Chevrolet’s proven 5.3L and 6.2L engines equipped with industry-first Dynamic Fuel Management featuring 17 different modes of cylinder deactivation. An all-new, advanced 2.7L Turbo engine that replaces the 4.3L V-6 as the standard engine on the high-volume Silverado LT and new Silverado RST, expected to offer 22 percent more torque, greater fuel efficiency and a stronger power-to-weight ratio than the current model. Proven 4.3L V-6 and 5.3L V-8 engines deliver full-size truck capability and performance for the most affordable trucks in the Silverado lineup. An all-new, Duramax 3.0L inline-six turbo diesel will be available in early 2019. A Silverado — and an engine — for every need
Each engine/transmission combination is matched with exterior design and interior features to create distinct personalities for each Silverado trim, based on three broad customer profiles: High Value, High Volume and High Feature.
High Value — For customers seeking full-size truck capability and the highest level of affordability, the Work Truck (WT), Custom and Custom Trail Boss trims offer two proven engine and transmission combinations:
Standard: 4.3L V-6 with Active Fuel Management and a six-speed automatic transmission (SAE-certified at 285 hp/305 lb-ft). Available: 5.3L V-8 with Active Fuel Management and a six-speed automatic transmission (SAE-certified at 355 hp/383 lb-ft). High Volume — For customers shopping in the heart of the truck market, the LT, RST and LT Trail Boss trims balance technology, efficiency and performance:
Standard for LT and RST: All-new 2.7L Turbo with Active Fuel Management and stop/start technology paired with an eight-speed automatic transmission (SAE-certified at 310 hp/348 lb-ft). Standard on LT Trail Boss and available on LT and RST: An updated 5.3L V-8 with Dynamic Fuel Management and stop/start technology with an eight-speed automatic transmission (SAE certified at 355 hp/383 lb-ft). Available on LT and RST: The all-new Duramax 3.0L Turbo-Diesel with stop/start technology paired with a 10-speed automatic transmission will be available in early 2019. High Feature — For customers shopping for a premium truck, the LTZ and High Country trims offer the highest levels of performance and technology, including:
Standard: Updated 5.3L V-8 with Dynamic Fuel Management and stop/start technology paired with an eight-speed automatic transmission (SAE certified at 355 hp/383 lb-ft). Available: Updated 6.2L V-8 with Dynamic Fuel Management and stop/start technology paired with a 10-speed automatic transmission (SAE certified at 420 hp/460 lb-ft). Available: The all-new Duramax 3.0L inline-six Turbo-Diesel with stop/start technology paired with a 10-speed automatic transmission will be available in early 2019. Improved Driving Experience
The performance of each engine/transmission combination benefits from a truck that is lighter and more aerodynamic than the previous model.
“With less weight and less wind resistance, we improved the driving dynamics without sacrificing fuel efficiency,” said Asoklis. “The next-gen Silverado is a bigger truck, but the chassis feels more responsive and acceleration is more pronounced. I would argue it’s the best-driving truck we have ever built.”
The 2019 Silverado is larger than before, including a wheelbase that is up to 3.9 inches (100mm) longer, yet overall length is only 1.6 inches (41mm) longer, enabling both more cargo volume and more interior room for all cab lengths. Remarkably, it’s also lighter, weighing up to 450 pounds (204 kg) less than the current Silverado when comparing crew cab V-8 models, due to extensive use of mixed materials and advanced manufacturing.
To improve the aerodynamic efficiency of the next-gen Silverado, the front grille features functional air curtains, similar to those introduced on the sixth-generation Camaro, that reduce wind drag by routing air around the front wheel wells. The powerful side profile also enhances aerodynamics, with an integrated spoiler at the rear edge of the cab that directs air onto the contoured tailgate, reducing wind drag from the bed. Most models also feature active aero shutters integrated in the front grille that close to reduce wind drag and open to provide improved engine cooling when needed. Changes like these result in a 7 percent increase in total aerodynamic efficiency.
From the family of the Most Dependable, Longest Lasting full-size pickups on the road*
For the new Silverado, Chevy set the lofty goal of improving on the legacy of the Most Dependable, Longest Lasting full-size pickups on the road. To do so, the next-gen truck will be subjected to more than 475,000 validation tests and accumulate a staggering seven million miles of real-world testing before the first 2019 Silverado 1500 is delivered to customers.
That includes a battery of tests for the Silverado engines and transmissions that will simulate a range of customer needs:
Each type of engine was first subjected to a “torture test” in a dynamometer test cell, running for months nonstop to simulate a lifetime of maximum hot and cold cycles. Each Silverado variant is certified to the SAE J2807 standard for towing and payload capacity. Certification requires a full battery of grueling tests such as the Davis Dam test, in which the truck must carry its maximum gross combined vehicle weight up a 7 percent grade in 110-degrees F (43 degrees C) heat, with no reduction in performance, including air-conditioning. Chevrolet engineers prove every Silverado engine and transmission design for lubrication capability on tilt stands, originally developed for Corvette, that tilt at an angle of up to 53 degrees and can simulate angles at a rate of up to 40 degrees a second — the equivalent of up to 1.4g. Production plans
Silverado production commences with crew-cab V-8 models starting in the third quarter. In the fourth quarter, production will expand to include regular- and double-cab models, as well as V-6 and 2.7L Turbo engines. The new Duramax 3.0L inline-six turbo diesel will be available in early 2019.
EPA fuel economy estimates and towing/payload capacities are not yet available, and will be announced closer to launch.
2019 CHEVROLET SILVERADO PROPULSION LINEUP
 
4.3L V-6
w/AFM (6-spd.) 2.7L I-4 Turbo w/AFM (8-spd.)  
5.3L V-8 w/AFM (6-spd.)
5.3L V-8 w/DFM (8-spd.)
3.0L I-6 Turbo-Diesel  (10-spd.)
6.2L V-8 w/DFM (10-spd.)
Work Truck (WT)
Std.
--
Avail.
--
--
--
Custom
Std.
--
Avail.
--
--
--
Custom Trail Boss
Std.
--
Avail.
--
--
--
LT
--
Std.
--
Avail.
Avail.
--
RST
--
Std.
--
Avail.
Avail.
--
LT Trail Boss
--
--
--
Std.
--
--
LTZ
--
--
--
Std.
Avail.
Avail.
High Country
--
--
--
Std.
Avail.
Avail.
* Dependability based on longevity: 1987-July 2017 full-size pickup registrations.
ALL-NEW 2.7L TURBO ENHANCES VERSATILITY OF THE 2019 SILVERADO
Technological powerhouse delivers performance and efficiency DETROIT — The all-new 2019 Chevrolet Silverado 1500 will be offered with an all-new, technologically advanced 2.7L Turbo that expands the range of available engines and builds upon additional choices to help customers find the Silverado that perfectly suits their needs.
Standard on LT and RST trims, the new engine delivers an SAE-certified 310 horsepower and 348 lb-ft of torque, for 22 percent more torque than the 4.3L V-6 it replaces. Developed specifically for truck applications, the new 2.7L Turbo inline four-cylinder engine delivers peak torque from 1,500 to 4,000 rpm.
The next-gen Silverado with the 2.7L Turbo delivers 0-60 mph performance in less than seven seconds and weighs 380 pounds less than the current Silverado with the 4.3L V-6. Compared with competitive full-size trucks, the Silverado 2.7L Turbo is expected to deliver comparable payload capability with greater torque than the 3.3L V-6 in the Ford F-150 XLT and the 3.6L V-6 in the Ram 1500 Big Horn.
“The new 2.7L Turbo is a technological marvel, with our most advanced valvetrain,” said Tom Sutter, chief engineer for the 2.7L Turbo. “With a broad, flat torque curve and quick throttle response, it punches above its weight, delivering surprising performance and efficiency.”
The cornerstone of the 2.7L Turbo is an innovative double overhead cam valvetrain that enables:
Chevrolet’s first use of Active Fuel Management (cylinder deactivation) on a four-cylinder engine. High- and low-lift valve profiles. Continuously variable valve timing. Additional engine technologies supporting the engine’s performance and efficiency include:
Dual-volute turbocharger housing for improved throttle response and low-speed torque. Chevrolet’s first application of Active Thermal Management, which uses targeted engine heating and cooling to improve engine performance in hot and cold ambient temperatures. An integrated exhaust manifold that is part of the cylinder head assembly and recovers exhaust heat for faster engine and transmission warmup, with quicker turbo response. Stop/start technology that automatically stops the engine in stop-and-go traffic for fuel efficiency. An electric water pump that eliminates the drag of a conventional, engine-driven pump to enhance efficiency. It also enables continual cabin heating even when the engine is disabled by the stop/start feature. Designed as a truck engine
The new 2.7L Turbo engine represents a clean-sheet design for Chevrolet and was developed from the outset as a truck engine.
To help generate the strong low-end torque customers expect in a truck, it was designed with a long piston stroke of 4.01 inches (102mm), which is the distance the piston travels up and down within the cylinder.
The long stroke enables improved combustion and thus a higher compression ratio. Typically, a long stroke can increase the load of the pistons against the cylinder walls, generating more friction. That’s alleviated in the 2.7L Turbo with an offset crankshaft. It is slightly off-center of the cylinders, allowing a more upright position for the connecting rods during their movement.
To support the high cylinder pressures that come with turbocharging, the crankshaft and connecting rods are made of forged steel and the pistons are made of a tough aluminum alloy with a cast iron ring groove insert.
All elements of the 2.7L Turbo were designed for the demands of turbocharged performance in a truck environment, and the engine was subjected to the same rigorous durability standards as the Silverado’s proven V-8 engines.
The 2.7L Turbo features an aluminum block and cylinder head for reduced mass.
Unique valvetrain offers more precise control
The 2.7L Turbo’s valvetrain is GM’s first to incorporate variable lift, duration and Active Fuel Management to optimize performance and efficiency across the rpm band. It is a key reason the engine’s peak torque is available at only 1,500 rpm.
The system’s electro-mechanical variable camshaft effectively allows the engine to operate with three different camshaft profiles, complementing the variable valve timing system to deliver optimized operating modes for different engine speeds and loads:  
High valve lift for full power. Low valve lift for balance of power and efficiency. Active Fuel Management shuts down two of the cylinders in light load conditions to further conserve fuel. “It’s like having different engines for low- and high-rpm performance,” said Sutter. “The camshaft profile and valve timing is completely different at low and high speeds, for excellent performance across the board.”
The camshaft design alters the lift of the intake and exhaust valves. As the engine load changes, electromagnetic actuators allow a movable shaft containing different cam lobes to shift imperceptibly between high-lift and low-lift profiles.
Lift is the distance the valve travels from its seat when opened, and duration is the amount of time the valve remains open. Higher lift and longer duration allow more air to flow into the combustion chamber, so the system’s high-lift lobe profile enhances performance at higher rpm, while the low-lift profile optimizes efficiency at low- and mid-range speeds.
Dual-volute turbocharger builds torque
The 2.7L Turbo engine employs an advanced dual-volute turbocharger that elevates the performance and efficiency advantages of a conventional turbo, with quicker response and enhanced low-rpm torque production.
Rather than a single spiral chamber (volute) feeding exhaust gas from the exhaust manifold to drive the turbine on the turbocharger, the dual volute design has a pair of separate chambers with two exhaust gas inlets and two nozzles to drive the turbine. The design allows the exhaust pulses of the engine to be leveraged for faster spool-up and subsequent boost production, particularly at low rpm, where the effect significantly enhances torque output and drivability.
It works in unison with the engine’s integrated exhaust manifold/turbocharger housing, which splits the exhaust channels from the cylinder head so the exhaust flows through two separate channels in the turbo housing, based on the engine’s exhaust pulses. When complemented by the precision of the engine’s valvetrain, that separation leverages exhaust scavenging techniques to optimize gas flow, which decreases exhaust gas temperatures, improves turbine efficiency and reduces turbo lag.
An electronically controlled wastegate and charge-air cooling system support the turbocharger and enhance its effectiveness. Compared to a conventional wastegate, the electronically controlled version offers more precise management of the engine’s boost pressure for smoother, more consistent performance.
With the charge-air cooler, the pressurized, heated air generated by the turbocharger is pumped through a heat exchanger before it enters the engine. That lowers the air charge temperature by about 130 degrees F (74 C), packing the combustion chambers with cooler, denser air that enhances power production. The system achieves more than 80 percent cooling efficiency with less than 2 psi (12 kPa) flow restriction at peak power, contributing to the engine’s available torque production at low rpm.
Additional features
A variable-pressure oiling system with a continuously variable-displacement vane oil pump enhances efficiency by optimizing oil pressure as a function of engine speed and load. With it, the oil supply is matched to the engine requirements rather than the excessive supply of a conventional, fixed-displacement oil pump.
Active Thermal Management helps the engine warm up faster and achieve its optimal engine temperature for performance and efficiency. The system uses a rotary valve system to distribute coolant through the engine in a targeted manner. It sends heat where it’s needed to warm up the engine to reduce friction and heat the cab, or cools when needed for high power operation.
An electric water pump — a first for Chevy trucks — supports the Active Thermal Management system and further enhances the engine’s performance and efficiency by eliminating the parasitic drag that comes with a conventional engine-driven water pump.
Direct fuel injection is used to optimize efficiency and performance. With direct injection, a higher compression ratio (10.0:1) is possible because of a cooling effect as the injected fuel vaporizes in the combustion chamber, reducing the charge temperature and improving resistance to spark knock. Direct injection also enables gas scavenging from the combustion chamber to the turbo for fast response.
Dual overhead camshafts contribute to the 2.7L Turbo’s smoothness and high output, with dual independent continuously variable valve timing working with the valvetrain to deliver optimal performance and efficiency. The dual independent system, which allows the intake and exhaust valves to be phased at different rates, promotes linear delivery of torque with near-peak levels over a broad rpm range, and high specific output (horsepower per liter of displacement) without sacrificing overall engine response or driveability.
An integrated exhaust manifold on the cylinder head assembly promotes faster engine warmup and quicker turbo response.
Oil jets located in the block are employed for performance and temperature control. They target the underside of the pistons and the surrounding cylinder walls with an extra layer of cooling, friction-reducing oil. The jets reduce piston temperature, allowing the engine to produce more power and enhance long-term durability.
Stop/start enhances fuel economy in city driving. The driver-selectable system shuts off the engine at stoplights and certain other stop-and-go situations, saving fuel. The engine automatically restarts when the driver takes their foot off the brake.
The all-new 2.7L Turbo is matched with a Hydra-Matic eight-speed automatic transmission featuring enhancements designed to improve shift quality, as well as a new centrifugal pendulum absorber torque converter that reduces vibrations to improve smoothness.
The all-new 2.7L Turbo will be built at the General Motors Spring Hill facility in Tennessee.
The 2019 Silverado goes on sale this fall. EPA fuel economy estimates and towing/payload capacities are not yet available and will be announced closer to launch.
  • A four-cylinder in a full-size truck? What?!

PSA Group's decade-long plan of possibly returning to the U.S. continues forward and they are facing their next roadblock, setting up a dealer network. Trying to convince dealers to sell brands that haven't been sold since the early nineties. But the French automaker believes they have a solution, using a tech-centric approach that will be affordable.
"We see the high cost of doing this business; we see the challenges that exist in profitability for dealers and OEMs. We believe with the new tools, the new technology, the new customer expectations, there are leaner, more agile ways to do this," said PSA North America chief Larry Dominique to Automotive News.
"We need to find a way to reduce our fixed costs. We want people to make a profit selling a new car."
A possible strategy could look similar to Hyundai's Shopper Assurance where a customer can do a number of tasks at home such as scheduling a test drive, apply for financing, and complete paperwork. There are things that will benefit from a physical presence such as service and vehicle delivery. Dominique said that he will not be asking those who decide to sell whatever brand PSA Group has in mind to go crazy with building a facility.
The bit about making a profit with selling a new vehicle is important here. Data from the National Automobile Dealers Association reveals that new vehicle losses for dealers rose $22 per car in 2015 to $421 in 2017. Used cars got hit worse with dealers losing $2 per car in 2017, from making $132 only three years ago.
Source: Automotive News (Subscription Required)
  • There's a fair amount of tech involved

Automakers have been bailing out of various auto shows for the past few years. Case in point, a number of German automakers pulling out of the Detroit show for 2019. Volkswagen is the latest one to announce that it will not be showing up to a major auto show.
Reuters reports that the German automaker will be skipping this year's Paris Motor Show. 
“The Volkswagen brand is continually reviewing its participation in international motor shows,” the company said in a statement. Instead, Volkswagen could host “various communications activities” in the city, including test drives.
Volkswagen joins other automakers including Ford, Mazda, Nissan, Opel, and Volvo that are skipping Paris.
Part of Volkswagen's decision comes down to cost-cutting due to the fallout of the diesel emission scandal. But the move is part of a larger trend of Automakers being more considerate of how they spend their marketing budgets. Declining numbers of attendees and competing shows such as CES in Las Vegas are the key reasons for this.
Volkswagen's other divisions such as Audi, Seat, and Skoda will be appearing in Paris according to a spokesman for Volkswagen's French operations.
Source: Reuters
  • The continuing trend of automakers dropping out of shows

Last week, Ford halted production of their F-Series pickup after a fire ravaged a supplier's plant in Southwestern Michigan. While Ford and supplier Meridan said everything was ok, analysts said it the shutdown could hurt Ford if it lasted more than a week. Last night, Ford announced that it would restart production of the F-150 at their Dearborn plant on Friday. Production at Kansas City and Louisville will come back online on Monday.
Getting to this point took a lot of work for both Ford and Meridan. According to Automotive News, Ford was the first automaker on site after the fire and was able to retrieve all of the tooling over a 48-hour period. One of dies used was shipped to Meridan's plant in Nottingham, UK. To get it there was a bit of a challenge since it weighs 87,000 pounds. Ford was able to charter an Antonov cargo plane (one of just 21 planes in the world that handle this task) and get it shipped to the UK in just 30 hours.
Faced with unexpected adversity, the Ford team, including our global supply partners, showed unbelievable resiliency, turning a devastating event into a shining example of teamwork. Thanks to their heroic efforts, we are resuming production of some of our most important vehicles ahead of our original targets," said Hau Thai-Tang, Ford's executive vice president of product development and purchasing in a statement.
Ford declined to say how much production was lost during the shutdown. James Albertine, an analyst with Consumer Edge Research said the week before that Ford could lose up to 15,000 trucks due per week due to the shutdown.
The company is planning to make up for some of the lost production by shortening the summer shutdown at the Dearborn and Kansas City plants.
Source: Automotive News (Subscription Required), Ford


Ford Restarting F-150, Super Duty Production Ahead Of Schedule After Fire At Magnesium Parts Supplier
Ford is resuming production of the F-150 pickup at Dearborn Truck Plant on Friday. Ford team has also successfully repaired the supply chain for Super Duty; production targeted to restart by Monday for Super Duty at Kentucky Truck Plant and F-150 at Kansas City Assembly Plant Ford marshaled a global team of experts, that included partners and suppliers, following a May 2 fire at Meridian Magnesium Products in Eaton Rapids, Mich., to quickly refurbish and relocate tooling needed to produce parts for the Ford F-150, Super Duty and five other vehicles – Ford Expedition, Explorer, Flex and Lincoln Navigator and MKT Because of this quick action, Meridian is producing truck parts again at its Eaton Rapids facility. Plus, Ford airlifted tooling to a Meridian facility in the U.K. to produce parts for F-150, which will further speed production ramp-up Ford Expedition, Explorer, Flex and Lincoln Navigator and MKT production continue uninterrupted Company reaffirms 2018 adjusted EPS guidance range of $1.45 to $1.70; expects adverse impact of $0.12 to $0.14 per share in second quarter due to lost production DEARBORN, Mich., May 16, 2018 – Ford Motor Company is restarting production of the popular F-150 at Dearborn Truck Plant Friday after just over one week of downtime. The company has also successfully repaired the supply chain for Super Duty, with production targeted to restart by Monday at the Kentucky Truck Plant as well as the Kansas City Assembly Plant that also makes F-150 pickups.
This follows the massive May 2 fire at the Meridian Magnesium Products facility in Eaton Rapids, Mich.
“While the situation remains extremely dynamic, our teams are focused on returning our plants to full production as fast as possible,” said Joe Hinrichs, Ford president, Global Operations. “The ramp-up time to full production is improving every day.”
Ford teams, together with suppliers including Walbridge and other contractors, worked nearly around the clock to get America’s best-selling vehicle franchise back on line as quickly as possible.
The teams removed 19 dies from Meridian’s badly damaged facility, and in one case, moved an 87,000-pound die from Eaton Rapids, Mich., to Nottingham, U.K., via an Antonov cargo plane – one of the largest in the world – in just 30 hours door-to-door. A die is a tool used to cut or shape material using a press.
“Faced with unexpected adversity, the Ford team, including our global supply partners, showed unbelievable resiliency, turning a devastating event into a shining example of teamwork,” said Hau Thai-Tang, Ford’s executive vice president of Product Development and Purchasing. “Thanks to their heroic efforts, we are resuming production of some of our most important vehicles ahead of our original targets.”
Work started immediately in the aftermath of the May 2 fire. Teams removed and remediated safety concerns – including dangling siding – and restored electricity, gaining approval to access the site while debris still smoldered inside.
This allowed Ford and Meridian to safely retrieve and relocate tools to more quickly resume part production and work to minimize the financial impact of the stalled plants.
Ford recovered, repaired and validated most dies that were at the Eaton Rapids facility, and Meridian is now producing parts for the F-150 at two locations – Eaton Rapids and Nottingham, U.K. Production of bolsters for Super Duty is also restarting at the Eaton Rapids plant.
Under normal circumstances, moving tooling the size of a bolster die would take approximately 10 days just to get the proper import and export approvals. However, Ford and its suppliers managed to cut the total time for the entire move to 30 hours, including trans-Atlantic flight time.
When the team removed the die from the Eaton Rapids factory, it was shipped to Rickenbacker International Airport in Columbus, Ohio. Rickenbacker had both the capacity to handle such a large piece of equipment and allowed an Antonov An-124 Russian plane, one of the largest planes in the world – typically used to transport trains, dump trucks and even a 25-foot sea yacht – to take off as soon as the equipment was loaded.
Nearly 4,000 miles away, a team in Nottingham was waiting to receive the die and take it to Meridian’s nearby factory. In between, the Ford team received a U.K. import license for the die – a mere two hours before the plane touched down.
Parts produced at Nottingham are being shipped via daily flights on a Boeing 747 jet until production in Eaton Rapids returns to pre-fire levels.
Inventories of Ford’s best-selling F-Series pickups and other vehicles remain strong and customers won’t have a problem finding the model they want.
  • Other plants will follow a few days later

Hyundai's N performance division has its eye on building a hotted-up Kona. 
Albert Biermann, head of the N sub-brand tells Auto Express that he has asked engineers to begin work on a test mule. Biermann also revealed what engine could be under the hood, a turbocharged 2.0L four from the i30 N.
“I’ve told them [the engineers] to build the car and we’ll see what happens with getting it approved. It has to be the i30 N powertrain, really. Of course, we can give Kona different specifications on suspension and steering, although there are some common components we can use in that area as well, because it’ll be front-wheel drive, like the i30 N. But we already know that it has to be that car’s engine and gearbox for the Kona N, yes,” said Biermann.
Emphasis mine. Hyundai's top brass needs to give the green light to make the Kona N a reality. We're assuming by building a test mule, it may give N some leverage to possibly make it into a production model.
Auto Express says that the Kona N would use the 250 horsepower variant of the turbo-four, and not the 271 horsepower version available with an optional Performance Pack.
Source: Auto Express
  • How to make a fast subcompact crossover

Tesla's 'production hell' is continuing on and is causing the automaker to shut down the Model 3 assembly line for almost a week.
Reuters has learned from two sources that Tesla will stop production of the Model 3 from May 26th to 31st in an effort to fix the various bottlenecks on the line. A Tesla spokesperson declined to comment.
Tesla warned that there would be 10 days of temporary shutdowns this quarter in an effort to try and get Model 3 production back up and running smoothly. CEO Elon Musk said the shutdowns would be used to make upgrades to reach a goal of building 5,000 Model 3s by the end of June. Already, Tesla stopped production for a few days last month, and also in February.
The key problem is Tesla's over-reliance on robots for production, something Musk acknowledges. 
Source: Reuters
  • More production hell issues

Within the next few weeks, Volvo will unveil the all-new S60 sedan. It will be the first model in Volvo's lineup to not be offered with a diesel engine.
“Our future is electric and we will no longer develop a new generation of diesel engines. We will phase out cars with only an internal combustion engine, with petrol hybrid versions as a transitional option as we move towards full electrification. The new S60 represents the next step in that commitment,” said Håkan Samuelsson, president and chief executive of Volvo Cars in a statement.
This news isn't that surprising when you back at comments made by Samuelsson in 2016.
Starting next year, Volvo will begin rolling out their electrification strategy that will see all-new Volvo models be equipped with either a mild-hybrid, plug-in hybrid, or full-electric powertrains. By 2025, Volvo is expecting 50 percent of new cars to be fully electric.
Source: Volvo


Volvo Cars to eliminate diesel from the new S60 sedan
The new Volvo S60 sedan - to be launched later this spring - will be the first Volvo to be produced without a diesel engine, highlighting Volvo Cars’ commitment to a long-term future beyond the traditional combustion engine.
All new Volvo models launched from 2019 will be available as either a mild petrol hybrid, plug-in petrol hybrid or battery electric vehicle. This is the most comprehensive electrification strategy in the car industry and Volvo Cars was the first traditional car maker to commit to all-out electrification in July 2017.
“Our future is electric and we will no longer develop a new generation of diesel engines,” said Håkan Samuelsson, president and chief executive of Volvo Cars. “We will phase out cars with only an internal combustion engine, with petrol hybrid versions as a transitional option as we move towards full electrification. The new S60 represents the next step in that commitment.”
Last month, Volvo Cars reinforced its electrification strategy, by stating that it aims for fully electric cars to make up 50 per cent of its global sales by 2025. The announcement was made at the 2018 Beijing Auto Show, positioning it as a powerful player in China, the world’s leading market for electrified cars.
The new S60, a premium mid-size sports sedan, is based on Volvo’s in-house developed Scalable Product Architecture (SPA), which also underpins the company’s award-winning new 90 Series and 60 Series cars. The S60’s estate sibling, the V60, was launched earlier this year in Stockholm.
The new S60 will initially be available with a range of four-cylinder Drive-E petrol engines as well as with two petrol plug-in hybrid versions. Mild hybrid versions will follow next year.
Production of the new S60 will start this fall at Volvo Cars’ brand new manufacturing facility outside Charleston, South Carolina. The Charleston plant will be the only manufacturing  location for the new S60, meaning American-built S60s will be sold in the US market as well as overseas through exports.
  • Farewell diesel
    -Volvo

In the coming weeks, Hyundai dealers will be getting their first batch of the 2019 Veloster and Veloster Turbo models. Before then, Hyundai has revealed the pricing for their polarizing three-door coupe.
The base Veloster will kick off at $19,385 (includes an $885 destination charge) and nets you a 2.0L four-cylinder Atkinson-cycle four-cylinder producing 147 horsepower and 132 pound-feet of torque. This will come paired with a six-speed manual, with a six-speed automatic adds a $1,000. There is a decent amount of equipment such as automatic emergency braking, heated side mirrors, lane keep assist, and a 7-inch infotainment system with Apple CarPlay and Android Auto. A Premium package that offers automatic climate control, blind spot monitoring, heated seats, and an 8-inch infotainment system with navigation adds $3,250 for the Veloster equipped with the automatic.
Next up is the Veloster Turbo R-Spec that swaps the 2.0L for the turbocharged 1.6L four-cylinder producing 201 horsepower and 195 pound-feet of torque, and a six-speed manual. This gets a unique interior, LED headlights, and Michelin Pilot Sport 4 summer tires. A dual-clutch transmission is available for an additional $2,500 and includes automatic climate control and heated seats.
Topping the lineup is the Turbo Ultimate beginning at either $27,535 (manual) or $29,035 (DCT). The Ultimate gets adaptive cruise control (DCT only), head-up display, 8-inch infotainment system with navigation, and pedestrian detection.
Those hoping to learn about pricing for the Veloster N will need to wait a bit longer.
Source: Hyundai


Hyundai Introduces All-New 2019 Veloster and Veloster Turbo
Veloster retains unique two-plus-one door asymmetrical bodystyle configuration Available 1.6-liter turbocharged engine with 201 horsepower and 195 lb.-ft. of torque Generous cutting-edge infotainment and connectivity features Standard multi-link rear suspension for agile dynamics Starting at $18,500 for 2.0 manual-transmission model AUSTIN, Texas, May 15, 2018 – Hyundai unveiled its all-new Veloster and Veloster Turbo models at the North American International Auto Show in January 2018. The fresh design was a collaborative effort of Hyundai designers from Seoul, South Korea and the U.S. design center in Irvine, California. The new Veloster features a comprehensive exterior and interior redesign, powertrain enhancements, and a bevy of new and improved infotainment and connectivity features. The 2019 Veloster began production in March 2018 in Ulsan, Korea, with U.S. market availability in the second quarter of 2018.
“Our new 2019 Veloster represents an even more compelling offering for young and young-at-heart automotive enthusiasts with more expressive design, involving dynamics and cutting-edge infotainment features,” said Mike O’Brien, vice president of Product, Corporate and Digital Planning at Hyundai Motor America. “When combined with Hyundai’s outstanding value and efficiency, the new Veloster is sure to attract a progressive new group of enthusiast buyers.”
ALL-NEW DESIGN
The Veloster merges the design appeal of a sport coupe with the versatility of an additional passenger side rear door in an asymmetrical two-plus-one configuration for easier rear-seat access. From the front, available LED headlights and LED Daytime Running Lights flank a striking new grille design. Functional air curtains add both a visual design cue and an active aerodynamic function. Hyundai’s signature cascade grille shape has morphed into a strong, three-dimensional design that sets the sport coupe apart.
Much of the redesign is derived from enhanced proportions and volume; the new shape clearly conveys focused dynamic performance, even standing still. Its stance is more muscular, with higher-volume fenders and wheel arches for a more planted appearance. The cowl point and A-pillar are further rearward and now connect the hood line and belt line into an integrated, powerful gesture. Available 18-inch alloy wheels aggressively fill the wheelhouse openings. Further, the roofline has been lowered for a unique profile and a distinctive coupe-inspired essence. The fender line is also more coupe-like, and the rear now has a more aggressive integrated diffuser design. Available LED taillights help complete the rear view with a high-tech appearance.
Also available is a full darkened roof treatment for a high-contrast performance appearance. Veloster’s dynamic rear design has a distinctive glass hatch and center-fascia chrome exhaust tips, with a single outlet for the 2.0-liter model and dual-outlets for Turbo and R-Spec models.
INTERIOR
The asymmetrical design carries through to the interior, with a driver-focused interior layout and on the Turbo Ultimate, a contrasting color environment that visually separates the driving cockpit. Each trim level has unique colors, materials, and accents, further differentiating each model with varying hues and textures.
In addition to these new colors and textures, the new Veloster also offers generous rear cargo capacity, with 19.9 cubic feet of interior volume behind the 2nd row seat, more than Mini Cooper, Mini Clubman and VW Beetle.
2.0-LITER NU ENGINE 
The Veloster 2.0-liter 4-cylinder engine uses the Atkinson-cycle for superior efficiency and lower emissions. The 2.0-liter engine delivers a peak output of 147 horsepower at 6,200 rpm (estimated) and maximum torque of 132 lb.-ft. at 4,500 rpm (estimated). The Nu 2.0-liter also features Dual Continuously Variable Valve Timing, an electronic throttle control, variable induction and innovative anti-friction coatings. The 2.0-liter engine is coupled with either a six-speed manual or a six-speed electronically-controlled automatic transmission. Three driver-selectable modes include Normal, Sport, and Smart, according to changing driver preferences.
GAMMA 1.6-LITER TURBOCHARGED ENGINE
The 1.6-liter turbocharged, direct-injected four-cylinder engine produces 201 horsepower at 6,000 rpm (estimated) and 195 lb.-ft. of torque from 1,500-4,500 rpm (estimated). Turbo models generate 201 horsepower on regular fuel, which represents a best-in-class specific output of 125.6 horsepower per liter. Further, there is an over-boost function that raises peak torque output to 202 lb.-ft. under maximum acceleration. Engine tuning maximizes low- and mid-range torque, for optimum acceleration under daily driving conditions.
Veloster Turbo is paired with a standard six-speed manual transmission or a seven-speed dual clutch transmission (DCT). For R-Spec manual transmission models, a B&M Racing® sport shifter will also be applied (later availability). Both transmissions were developed in-house by Hyundai. The Veloster Turbo seven-speed dual-clutch transmission features steering wheel-mounted paddle-shifters and SHIFTRONIC® transmission gear control. In addition, all Veloster Turbo models feature Active Engine Sound, which enhances intake and exhaust powertrain sound character inside the cabin for a more visceral driving experience, especially during spirited driving. All A/T and DCT models also offer three selectable driving modes, including Normal, Sport and Smart, (Normal and Sport on M/T models), according to driver preferences for engine, transmission and steering feel. The Smart mode varies within the range of settings according to how the vehicle is currently being driven (such as in an economical or a more spirited manner). For Turbo models, driver preference for Active Engine Sound is also available.
TORQUE VECTORING CONTROL
All Veloster models offer Torque Vectoring Control (TVC). This active cornering feature utilizing capabilities from the Electronic Stability Control (ESC) and powertrain control systems, allows Veloster to improve dynamic cornering during more enthusiastic driving. TVC uses wheel-speed sensors coupled with ESC algorithms to apply precise braking force to the inside front wheel during spirited cornering. This active braking redirects power to the outside front wheel in the turn, reducing wheelspin for enhanced cornering grip and corner-exit acceleration. Overall, this provides Veloster drivers with an incremental margin of cornering precision during enthusiastic driving.         
Further, Veloster Turbo features a quicker-ratio steering rack and a revised steering calibration to match, which gives drivers precise cornering, feedback and control.
DCT TRANSMISSION
Hyundai’s EcoShift DCT takes the benefits of a manual transmission, such as low fuel consumption, and blends these with automatic transmission benefits, such as high comfort levels and driving ease. In addition, the DCT enables direct connection for high efficiency and uninterrupted torque transfer during shifts. The DCT also incorporates Hyundai’s Hillstart Assist Control (HAC), designed to minimize rolling backwards on steep ascents.
Veloster’s compelling combination of performance with efficiency is a formula many industry competitors are seeking to duplicate. Hyundai’s development focus on all the factors of efficient performance, such as small-displacement turbocharged engines, dual-clutch transmissions, comprehensive lightweighting, efficient aerodynamics, and reduction of parasitic engine losses through electric-powered ancillaries, have combined to yield simultaneous benefits in performance and efficiency to the consumer.
TURBO MODEL SPORT-TUNED DYNAMICS
Veloster Turbos are fitted with a McPherson strut front suspension, coil springs, gas shock absorbers and a 24-mm diameter front stabilizer bar. The rear suspension is a lightweight independent multi-link design with a 19-mm stabilizer bar to further control body roll. The rear suspension uses gas-pressurized shock absorbers for ride comfort with excellent control. Veloster features electric power steering that adjusts assistance to changing driving conditions while improving fuel economy over a conventional steering system. When equipped with the six-speed manual transmission, available 18-inch alloy wheels are fitted with Michelin® Pilot Sport 4 summer tires.
All Veloster models also use aluminum front steering knuckles for a total of 10.6 lbs. of reduced unsprung mass at the front suspension compared with the previous generation. In addition, the rear suspension carrier is aluminum, resulting in an 8.4 lb. reduction of unsprung mass for the rear suspension compared with the previous generation.
ADVANCED STANDARD SAFETY
2019 Veloster includes standard Forward Collision-Avoidance Assist (FCA), which uses the car’s front-facing camera to detect an imminent collision and avoid impact or minimize damage by braking autonomously. Three additional systems also utilize the front-view camera to boost safety and convenience: Lane Keeping Assist (LKA), High Beam Assist (HBA) for the available LED headlights, and Driver Attention Warning (DAW). Lane Keep Assist is a standard safety feature for 2019 Veloster.
By sensing road markings, LKA helps to prevent accidental lane departure by helping to steer the vehicle as required. HBA automatically controls the high beam headlights by dimming and illuminating them automatically as needed with approaching traffic, while the Driver Attention Warning system monitors a spectrum of driver-related characteristics to detect driver fatigue or careless driving.
Veloster radar systems also assist with the available Blind-Spot Collision Warning (BCW) to detect approaching vehicles from the rear that may be obscured from view and alert the driver of their presence during lane changes. The Rear Cross-Traffic Collison Warning (RCCW) detects when another vehicle may have entered the car’s rearward path, such as when backing out of a parking spot, and provides a driver alert. Veloster Turbo also offers available Smart Cruise Control for additional driver convenience.
All Velosters feature a rearview camera with dynamic guidelines fitted to all models for superior parking visibility. Velosters have an exceptional level of standard safety features for the sporty coupe segment highlighted by a Vehicle Stability Management (VSM) system, which optimally manages ESC (Electronic Stability Control) and the Motor-Driven Power Steering (MDPS).
VSM works to control two effects. The first is when a driver accelerates or brakes on a split-mu surface (slippery on one side, dry pavement on the other) and the vehicle wants to pull in one direction. VSM detects this condition and sends a signal to the MDPS to apply steering assist to counter this force. VSM counters the pull and automatically provides counter-steering. VSM reacts the same way during sudden lane changes or fast cornering.
All Velosters feature six airbags—including dual front, front seat-mounted side-impact, and front and rear side curtain airbags. The Veloster braking package includes four-wheel disc brakes and an Anti-Lock Braking System (ABS) including Brake Assist, which provides maximum braking force when a panic stop is detected, and Electronic Brake-force Distribution (EBD), to automatically adjust the braking force to front and rear axles based on vehicle loading conditions.
ADVANCED INFOTAINMENT AND CONNECTIVITY
Veloster offers a full suite of sophisticated technologies paired with user-friendly functionality to keep passengers informed and entertained. The premium infotainment system offers various advanced connectivity features, including standard Android Auto™ and Apple CarPlay™. Also available are SiriusXM® Radio, HD Radio and next-generation Blue Link® LTE-powered connectivity. The standard seven-inch color LCD display includes AM/FM/MP3 touchscreen audio, auxiliary inputs, and Rear View Monitor. The available floating-design eight-inch touchscreen navigation display includes next-generation Blue Link, traffic flow and incident data via HD radio, and Infinity® premium audio with eight speakers, including a subwoofer and Clari-Fi ™ music-restoration technology.
A Heads-Up Display system is available, projecting a virtual image onto the transparent panel mounted behind the instrument panel and helping the driver to keep his or her eyes on the road. With an 8.0-inch projected-image size and an outstanding 10,000 nits of luminance, the Heads-Up Display ensures both excellent day- and night-time visibility. Information projected includes speed, navigation instructions, cruise control, Lane Departure Warning, Blind-Spot Collision Warning and audio system information. When in Sport mode, the system projects more driver-focused information including RPM, MPH and transmission gear. Deployed vertically by a simple touch of a button beside the steering wheel, the display disappears into the dashboard when not in use.
Customers expect to be connected to their electronics at all times, so Veloster comes standard with a multifunction seven-inch touchscreen display. Veloster audio/navigation systems also offer:
Available Qi wireless-charging capability Available eight-inch display audio or audio/navigation system Available HD Radio® capability “Eyes Free” Apple Siri® integration for iPhone Navigation map and music split-screen display function Navigation map with enhanced junction-view lane guidance Veloster Turbo features standard Infinity Premium audio with eight speakers, including a subwoofer, passive radiator and external amplifier. A SiriusXM® Satellite Radio interface is integrated into the head unit and features channel logos and data services.
Veloster also offers available smartphone wireless charging. To charge a device, simply place a compatible smartphone on the wireless-charging interface located in the center console storage, recharging without the need for cables. The system indicates when the phone has fully charged, reminds occupants to remove their phone when exiting the vehicle, and detects when a foreign object is in the recharging area that could interfere with charging. The system is fully compliant with WPC’s Qi standard for ease of use.
NEXT-GENERATION BLUE LINK® CONNECTED CAR SYSTEM
Veloster offers Blue Link®, including three years of complimentary Blue Link services, with enhanced safety, diagnostic, remote and guidance services. Blue Link brings connectivity directly into the car with technologies like Remote Start with Climate Control, Remote Door Lock/Unlock, Car Finder, Enhanced Roadside Assistance, and Stolen Vehicle Recovery. Blue Link features can be accessed via buttons on the rearview mirror, the MyHyundai.com web portal, the Blue Link smartphone app, the Amazon® Alexa Blue Link skill, and the Blue Link Google Assistant app. Some features can also be controlled via Android Wear™ and Apple Watch™ smartwatch apps. The latest release of the Blue Link smartphone app includes:
Widgets for easy access to remote features Ability to send Point-of-Interest data to vehicle navigation system (if so equipped) Access to Blue Link notification settings More details on specific Blue Link-equipped vehicles available at www.hyundaibluelink.com.
COLOR
Veloster is available in a variety of energetic exterior colors, including: Ultra Black, Chalk White, Sonic Silver, Thunder Gray, Sunset Orange, Racing Red, and Space Gray. Interior environments include cloth (2.0/Turbo R-Spec), cloth/leather combinations (2.0 Premium/Turbo), and all-leather (Turbo Ultimate) models.
PRICING
VELOSTER ENGINE AND TRIM
MSRP
2.0 M/T
$18,500
2.0 A/T
$19,500
2.0 A/T PREMIUM
$22,750
TURBO R-SPEC M/T
$22,900
TURBO DCT
$25,400
TURBO ULTIMATE M/T
$26,650
TURBO ULTIMATE DCT
$28,150
  NOTE: EXCLUDES FREIGHT CHARGE OF $885
 
  • To begin at $19,385

Mitsubishi is starting to find its footing thanks to the alliance it formed with Nissan towards the end of 2016. The company last year that it plans on "launching 11 new and redesigned models" for the U.S. Two of the models have go on sale this year, the Eclipse Cross and Outlander Plug-In Hybrid. But what about the other nine? Motor Trend has learned some details on a fair number of vehicles in the cards.
Outlander: Redesign coming in 2021 and will use the underpinnings of the Nissan Rogue, Outlander Sport: To be redesigned in 2022. Will be based on the platform that is used on the Nissan Rogue Sport and upcoming Kicks. Hybrid/Electric Models: Mitsubishi is planning to offer a plug-in hybrid or pure electric powertrain for all of their models.  Possible Midsize Truck: The number one request of Mitsubishi's U.S. dealers is a midsize truck. Mitsubishi is reportedly studying a truck for the U.S. But for the truck to get approval, it needs to make sense for the alliance to move forward. If approved, the truck would likely be built in the U.S. to avoid the chicken tax. Source: Motor Trend
  • What's in the cards for Mitsubishi?

Lawsuits are fun as they bring forth documents that reveal the internal workings of a company. Case in point is a securities case against Fiat Chrysler Automobiles. Earlier this week, lawyers filed excerpts of an email from CEO Sergio Marchionne to Gualberto Ranieri, the company’s U.S. spokesman sent in 2015. According to Reuters, the email reprimanded Ranieri for making comments about how the company doesn't use defeat devices in their vehicles.
“Are you out of your goddam mind?” wrote Marchionne in the email.
Marchionne also wrote that Renieri's actions were “utterly stupid and unconscionable” and that he should be fired.
In a statement provided to Reuters, FCA said it was “understandable that our CEO would have a forceful response to any employee who would opine on such a significant and complex matter, without the matter having been fully reviewed through its appropriate channels.”
The statement goes onto say the Ranieri's comments come only a few days after it was revealed Volkswagen used defeat devices in their diesel vehicles “and before a comprehensive internal review and discussions with component suppliers was possible.”
The lawsuit against FCA was filled back in 2015 over allegations of defrauding investors by overstating its ability to comply with vehicle safety laws. The company downplayed various safety problems that helped inflate their stock price from October 2014 to October 2015. However, FCA would be fined by the National Highway Traffic Safety Administration over lapses in various vehicle recalls. 
An amended version of the lawsuit that claims the company did not fully comply with emission laws was filed last year.
Source: Reuters
  • The wrath of Sergio

Next month could be bringing some big news for Alfa Romeo. Autocar is reporting that FCA CEO Sergio Marchionne will be announcing a new large SUV and Giulia coupe at the company's Balocco test track in Italy.
The large SUV, which we first reported on back in December, will use a stretched version of the Stelvio's platform. It will be the first Alfa model to come equipped with a mild hybrid system, along with an electric turbo using a 48V electrical system.
The Giulia Coupe (first brought to light last month), will be offered with the same engines found in the Giulia sedan, along with two hybrid powertrains featuring an energy recovery system (ERS). The turbo 2.0L version is expected to produce 345 horsepower combined, while the 2.9L biturbo V6 will produce 641 horsepower. Autocar also reports that a five-door variant (see Audi A5 Sportback and BMW 4-Series Gran Coupe) is a possibility. 
Both models are expected to go on sale next year.
Source: Autocar
  • All about that electrification

A new report from the Wall Street Journal reports that engineers at Tesla wanted to put more safeguards for Autopilot to keep drivers attentive to the road, but were rejected by executives.
This has been concern within Tesla since the launch of Autopilot and only intensified in 2016 when a Model S crashed into a trailer in Florida. The driver was killed and an investigation revealed that Autopilot was on at the time. After the crash, Tesla brought in suppliers to talk about possible ways to keep a driver's attention on the road. Two ideas mentioned in the report included,
Tracking the eyes of a driver to make sure they are watching the road. This would use a camera and infrared sensors. Cadillac uses something similar with their SuperCruise system. Incorporating sensors into the steering wheel to monitor whether a driver's hands were on the wheel. Autopilot already has a sensor to monitor small movements of the wheel and will issue a warning to the driver if it doesn't detect any movement. The downside is that the driver can quickly touch the wheel to stop the warnings for a few moments. However, the ideas were thrown out by Tesla executives (including CEO Elon Musk) due to costs and concerns that the technologies would be ineffective or annoy drivers.
“It came down to cost, and Elon was confident we wouldn’t need it,” a source told the Wall Street Journal.
A key issue with Autopilot is the false sense of confidence that drivers give to it - see the number of near-miss videos on Youtube as evidence. Tesla says in their owner manuals Autopilot has limitations and drivers must agree to a screen when Autopilot has engaged, "that it is their responsibility to stay alert and maintain control." Musk admitted during Tesla's recent earnings call that complacency with Autopilot was an issue.
“When there is a serious accident, it is almost always, in fact, maybe always the case, that it is an experienced user,” said Musk.
“And the issue is...more one of complacency, like we get too used to it.”
Source: Wall Street Journal (Subscription Required)
  • I wonder if Tesla is having a rethink about this

The list of automakers skipping the 2019 Detroit Auto Show continues to grow. Automotive News reports that Audi is the latest automaker to skip next year's show. The company wrote in a statement that it "has had a long and successful history at NAIAS, debuting countless models that Audi customers enjoy today. For 2019, we have decided that we will not participate in NAIAS. We will continue to evaluate Auto Shows on a case by case basis relative to the timing of our product introductions and the value the show brings from a media and consumer perspective."
Just within the past few months, both BMW and Mercedes-Benz have announced they would be no-shows for the 2019 Detroit Auto Show for similar reasons. Other reasons cited by automakers include reallocating money for marketing, not wanting to compete for attention with other automakers, and more competition from other shows such as the Consumer Electronics Show.
The Detroit Auto Dealers Association, the group who puts on the show is trying their best to lure automakers to the show once again. A spokesman told Automotive News that plans are underway to change up the show and provide automakers "a global stage that delivers cost-effective opportunities to audiences" that "only Detroit" can offer. There is also talk of moving the show to October.
Source: Automotive News (Subscription Required)
  • Joining alongside BMW and Mercedes-Benz

Yesterday, Ford held its annual shareholder meeting and executives were once again defending the decision to cut most of their car lineup and focusing on trucks and utility vehicles. Automotive News reports that shareholders questioned CEO Jim Hackett and Executive Chairman Bill Ford about the move and the two said the changes are necessary due to the changing tastes of customers. Ford expects 90 percent of its North American mix to be made up of trucks and utility models by 2020. 
"This doesn't mean we intend to lose those customers. We want to give them what they're telling us they really want. We're simply reinventing the American car," said Hackett.
"We don't want anyone to think we're leaving anything. We're just moving to a modern version. This is an exciting new generation of vehicles coming from Ford."
Bill Ford blamed the media coverage for the negative reaction to this move. The company officially made the announcement during their first-quarter earnings reports, but rumors of this move had been floating around for over a year.
"I wish the coverage had been a little different. If you got beyond the headline, you'll see we're adding to our product lineup and by 2020 we'll have the freshest showroom in the industry. The headlines look like Ford's retreating. In fact, nothing could be further from the truth."
We have to think a fair amount of this 'negative' media coverage comes from Ford comes from the lack of information concerning the future of Ford's entry-level lineup and Lincoln. Ford's entry-level crossover is the EcoSport which begins at $19,995 and only returns EPA figures of 27 City/29 Highway/28 Combined (23/25/29 for the AWD model), which will push some buyers away. We don't know if Ford is planning an update to the EcoSport to boost fuel economy figures or has another model in the cards to sit underneath the EcoSport.
Lincoln's future is murkier. The only comment made about the brand was by Hackett, saying the Continental (only introduced two years ago) would continue "through its life cycle". This is leading a fair number of people to think the Continental's days are numbered.
For now, Ford is focusing on their $25.5 billion cost-cutting goal by 2022 and getting those trucks and SUVs out the door. The hope is this will help Ford's stock price, which has been a major point of contention with shareholders for many years.
"I share your frustration. The whole management team does. Look, we want to get the stock price moving. The business can get fitter, and it will get fitter," said Bill Ford.
Source: Automotive News (Subscription Required)
  • You can guess as to why

It feels somewhat weird to be writing a review of the 2018 Ram 1500 as the 2019 model begins to slowly roll out to dealers. Ram is trying their best get the 2018s out the door. At the time of this writing, Ram is offering up to $12,356 bonus cash on certain 1500 models. Seems very tempting, but are there some other reasons to consider the older 1500 over the new one?
Design is very subjective. One person may like the design of a vehicle, while the another may think it is quite ugly. Case in point, I’m not a fan of 2019 Ram 1500. The new shape makes the Ram look like any other pickup truck on sale. At least the 2018 model still retains the big-rig styling that was introduced with the 1994 Ram 1500. The front end is in your face with a large grille, square headlights, and muscular hood. The side profile shows off a set of 20-inch wheels standard on the Limited and the optional RamBox storage system. That isn’t to say the 2018 Ram 1500 doesn’t have design issues either. The Limited trim swaps the standard crosshair grille for one that features ‘RAM’ in big letters. It is just a bit much and doesn’t quite fit in with the rest of the truck. Since our last review of the Ram 1500 in 2016, not much has changed in the interior. It still has one of cleanest layout for controls and material quality is quite high. Some will snicker at the belt-buckle seat pockets and a ‘Limited’ badge stitched in the center console, but thankfully those touches are only on the higher end models. I do wish Ram would put in a telescoping adjustment for the steering wheel as it would make easier to find a comfortable driving position. The adjustable pedals alleviate this issue somewhat. One change I was glad to see was the newest version of UConnect being installed on the 2018 model. This brings an updated interface and compatibility with Android Auto and Apple CarPlay. The new interface makes UConnect even easier to use with clearer text and brighter screen. Integration with Apple CarPlay is one the best as it only took a few seconds for the system to find my phone and bring up the CarPlay interface. If you decide to go with the Limited, the only engine on offer is the 5.7L HEMI V8 with 395 horsepower and 410 pound-feet of torque. An eight-speed automatic and four-wheel drive complete the powertrain. Those wanting other options will need to drop down to one of the lower trims. On paper, the HEMI V8 seems like a capable performer with close to 400 horsepower. On the road, the HEMI doesn’t quite match up to those expectations. Despite having a muscle car snarl when accelerating, the HEMI V8 is noticeably slower than competitors. As an example, the Ram 1500 took a few ticks longer to hit 70 mph than the previous GM or Toyota full-size trucks I have driven. I cannot pinpoint the possible culprit to this, but I have the feeling the truck’s curb weight and the eight-speed automatic play a role. EPA fuel economy figures for the 2018 Ram 1500 with the HEMI V8 and four-wheel drive are 15 City/21 Highway/17 Combined. My average for the week landed at 14.7 mpg in mostly city driving. Ram still holds an edge when it comes to the ride quality. The coil-spring setup for the rear suspension gives the truck a ride quality more akin to a sedan with most bumps being smoothed over. This truck also came with an optional air suspension which lowers the truck at highway speeds to improve fuel economy. It also makes getting in and out of the Ram 1500 slightly easier. One item I hope Ram has improved with the 2019 model is the steering. The system used in the 2018 Ram 1500 is quite slow and light, meaning it takes more effort to do simple tasks such as pulling into a parking spot. The Ram 1500 Limited is only available in one configuration - Crew Cab, 5’7” cargo bed, 5.7L HEMI V8, and 4WD. Base price is $56,375, with our test truck coming in at $63,870. For most folks, I would recommend dropping down to the likes of the Big Horn or Laramie as they offer more configuration options in terms of powertrains, cabs, and features. Aside from the deep discounts being on offer for the 2018 Ram 1500, deciding whether to go for the old or new model will come down to personal desires. For some, seeing the various improvements and the shiny new body will draw them towards the 2019 model. For others, the deep discounts and being a proven product will bring them over to the 2018 model. I fall into the latter category at the moment, but it might change whenever I get the chance to drive the 2019 Ram 1500. Disclaimer: Ram Provided the 1500, Insurance, and One Tank of Gas
Year: 2018
Make: Ram
Model: 1500
Trim: Limited
Engine: 5.7L HEMI VVT V8
Driveline: Eight-Speed Automatic, Four-Wheel Drive
Horsepower @ RPM: 395 @ 5,600
Torque @ RPM: 410 @ 3,950 
Fuel Economy: City/Highway/Combined - 15/21/17
Curb Weight: 5,387 lbs
Location of Manufacture: Warren, MI
Base Price: $53,595
As Tested Price: $63,870 (Includes $1,395 Destination Charge and $300 Suede Headliner Delete Credit)
Options:
Limited Package 26V - $3,200.00
Limited Tungsten Edition - $1,825.00
Ram Box Cargo Management System - $1,295.00
Power Sunroof - $1,095.00
Tri-Fold Tonneau Cover - $595.00
Anti-Spin Differential Rear Axle - $435.00
Single Disc Remote CD Player $345.00
Trailer Brake Control - $295.00
3.92 Rear Axle Ratio - $95.00
  • Taking a look at the outgoing model one last time

There will soon be another police vehicle you'll need to keep an eye out for. Today, Dodge announced the Durango Pursuit which will give police departments another choice in the utility segment.
Power comes from the 5.7L HEMI V8 producing 360 horsepower and 390 pound-feet of torque. This comes paired with an eight-speed automatic and full-time all-wheel drive system. A two-speed transfer case should help out if a chase goes off-road. There are numerous upgrades including stronger brakes, heavy-duty oil cooler and water pump; and larger alternator. Standard equipment includes tri-zone temperature control, eight-way power adjustments for the driver, and trailer sway control.
“Unofficial testing results at the Michigan State Police 2018 model-year vehicle evaluation event created such a stir among law enforcement agencies that we simply had to find a way to build this vehicle. The Dodge Durango is already known as the Charger of SUVs, so it is only natural that the new Durango Pursuit complements the Charger Pursuit in police fleets across the country,” said Steve Beahm, Head of Passenger Car Brands, Dodge//SRT, Chrysler and FIAT – FCA North America.
Police departments will need to be quick on ordering one, as Dodge will only be offering the Durango Pursuit for a limited time.
Source: Dodge


Dodge Announces Police Pursuit Version of 2018 Durango

May 10, 2018 , Auburn Hills, Mich. - Dodge is expanding its police vehicle lineup, adding a new Pursuit version of its Dodge Durango.
“Unofficial testing results at the Michigan State Police 2018 model-year vehicle evaluation event created such a stir among law enforcement agencies that we simply had to find a way to build this vehicle,” said Steve Beahm, Head of Passenger Car Brands, Dodge//SRT, Chrysler and FIAT – FCA North America. “The Dodge Durango is already known as the Charger of SUVs, so it is only natural that the new Durango Pursuit complements the Charger Pursuit in police fleets across the country.”
 
The 2018 Dodge Durango Pursuit is powered by the legendary 5.7L HEMI® V-8, coupled with a full-time, active all-wheel-drive (AWD) system. This is the same powertrain combination most commonly deployed in the Dodge Charger Pursuit, the top-selling police sedan in the U.S. market. The Durango Pursuit also offers a two-speed transfer case for true low-range off-road capability and incorporates larger, heavy-duty anti-lock brakes that deliver a 60-0 mile per hour (mph) stopping distance of 134 feet.
 
Other notable standard features of the 2018 Dodge Durango Pursuit include:
5.7L V-8 HEMI with Fuel Saver Technology delivers best-in-class horsepower (360) and torque (390 lb.-ft.) Eight-speed automatic transmission delivers quick shifts and improved fuel economy Rear-wheel-drive-based drivetrain is the foundation for Durango’s outstanding on-road driving performance. Standard AWD further enhances driver confidence by leveraging the SUV’s 50/50 weight distribution Segment’s longest wheelbase (119.8 inches) provides added stability and improved handling Best-in-class 7,200 lb. towing capability 8.1 inches of ground clearance ParkView® rear backup camera with ParkSense® alert Eight-way power adjusting driver seat controls Air conditioning with air filtration Under-vehicle mount for spare tire, maximizing interior cargo space and accessibility Class-exclusive, K-9 friendly Tri-Zone interior temperature control Trailer sway control Spot lamp wiring prep package 220-amp alternator 800 cold cranking amp (CCA) battery Heavy-duty oil cooler and water pump Power locking fuel filler door The new 2018 Dodge Durango Pursuit V-8 AWD is available for order for a limited time. For more information, law enforcement agencies should call (800) 999-3533.
  • The Ford Police Interceptor Utility and Chevrolet Tahoe PPV have some competition

Rolls-Royce is talking up a big game with their new Cullinan SUV with their press release mentioning it is the "most anticipated car of 2018 and, quite possibly, the most anticipated Rolls-Royce of all time," and an "all-terrain high-bodied car that makes the idea of authentic, luxury off-road travel a reality for the first time." Okay...
Our first thought seeing the Cullinan was, "wow, Rolls-Royce has built a tall Phantom wagon." The front and part of the side profile comes directly from the Phantom sedan. There is the large Rolls-Royce grille, square headlights, and the suicide rear-doors. For the back, the Cullinan is the first Rolls to use a tailgate. The company calls it the ‘The Clasp’, which references an "era when luggage was mounted on the exterior of the motor-car, so the occupants did not travel with their belongings." The tailgate opens up automatically by pressing a button on the keyfob.
From the measurements, the Cullinan looks to be imposing,
230-inch overall length 130-inch wheelbase 85-inches wide 72-inches high To give some perspective, the Cullinan is 7.2 inches shorter overall than the Phantom, but the SUV is 5.6-inches wider.
The interior is the same as you'll find in the Phantom with a minimalist dash design, digital instrument cluster, and a large infotainment screen that is touch-enabled. Back seat passengers sit higher than those in the front so they get a commanding view of the road. There is the option of a bench seat that offers 60/40 split folding or two plush, powered seats with a center console with integrated fridge. Behind the rear seats, the Cullinan offers 19 cubic feet of space with the seats up and 68 cubic feet with seats folded and cargo self in place - perfect for picking up a "Mark Rothko from the Art Gallery or a newly discovered artefact from the latest archaeological dig." (This is an actual line from the press release -WM.)
Power comes from a 6.6L twin-turbo V12 (Rolls still refers to the engine as a 6.75L) producing 563 horsepower and 627 pound-feet of torque. This is channeled through an eight-speed automatic and a new all-wheel drive system with all-wheel steer. Underpinning this is the all-aluminum Architecture of Luxury first used on the new Phantom. The platform features a self-leveling air suspension that will automatically lower the vehicle 1.5-inches when entering the vehicle. The suspension will also actively push down on wheels that are losing traction to help keep the vehicle moving in off-road situations.
As for pricing, the Cullinan will begin at $325,000 with deliveries beginning in early 2019.
Source: Rolls-Royce
 
EFFORTLESS EVERYWHERE: THE ROLLS-ROYCE CULLINAN
When Rolls-Royce announced three years ago that it would launch Cullinan, it did so in the knowledge that its customers around the world had asked it to build “The Rolls-Royce of SUVs”, with luxury, performance and usability not seen before in the SUV market.
#RollsRoyceCullinan #EffortlessEverywhere
“The super-luxury lifestyle is evolving and Rolls-Royce is in the lead. Luxury is no longer an urban concept. More and more it is about embracing and experiencing the wider world. Our customers expect to go everywhere in luxury, effortlessly and without compromise, conquering the most challenging terrain to enjoy life’s most enriching experiences, wherever they may be. For this reason, they have asked us to create a Rolls-Royce that offers uncompromised luxury wherever they dare to venture. Cullinan is that car. It is Effortless, Everywhere.
It is incomparable and dramatically evolves the parameters of super-luxury travel, translating Rolls-Royce’s ethos of ‘Effortlessness’ into physical capability, anywhere in the world. Cullinan will simply take the world in its stride.”
Torsten Müller-Ötvös, Chief Executive Officer, Rolls-Royce Motor Cars.
“The launch of a new Rolls-Royce model is always a seminal moment in the luxury industry. Today we are setting a new standard by creating a new class of motoring and motor car for customers who are well-connected, highly mobile and have a global perspective. They want a new type of motor car that gives them unbounded access in ultimate luxury. Their sense of adventure and daring demands a “go-anywhere in ultimate luxury” motor car that will both take them to and meet them at the pinnacle of life. Cullinan is that motor-car.” 
Peter Schwarzenbauer, Chairman of Rolls-Royce and Member of the Board of the BMW Group.
“From the very beginning the design team treated this brand new Rolls-Royce as a unique, high bodied car. With global customer expectations in mind, our aim was two-fold – realise a presence to match the magnificent capability of Cullinan, whilst setting sector defining standards for luxury and elegance. We know that many of our luxury patrons pursue sports or leisure hobbies that require precisely this type of go anywhere vehicle – Cullinan’s design gesture had to possess an immediate sense of effortless accomplishment.”
“The label SUV is now applied to anything with a two-box silhouette and the least suggestion of going off tarmac. We envisioned an authentic, three-box high-bodied all-terrain car with a convention-challenging design and absolute capability that would satisfy the adventurous urges of our clients.”
Giles Taylor, Director of Design, Rolls-Royce Motor Cars.
“This landscape is savage, but this journey has been seamless. What's unique is the ability to absorb the road without thought and simply let yourself get lost. You don't so much drive as you float and it seems to get almost smoother the faster you go. The turning and the grip are unreal, almost hugging the road and seeming to glide above it. Sometimes making pictures is as much about getting there as it is about the image itself.”
Cory Richards, National Geographic photographer and star of The Final Challenge.
Cullinan at a glance
The most anticipated car of 2018 and, quite possibly, the most anticipated Rolls-Royce of all time. Named after the largest diamond ever discovered which now resides in the British Crown Jewels. An all-terrain high-bodied car that makes the idea of authentic, luxury off-road travel a reality for the first time. Luxury travel is now Effortless, Everywhere. Contemporary and functional design ensures Cullinan gains iconic status in the face of increasingly bland SUV designs. The first “three-box” car in the SUV-sector. Cullinan’s rear partition wall creates a distinct environment for passengers, separated from the luggage compartment. The most practical of Rolls-Royces. Cullinan is the most versatile, family oriented, fun-to-drive super-luxury SUV available today. The second new Rolls-Royce to sit on the all-new aluminium ‘Architecture of Luxury’, Cullinan is the most technologically advanced, and only purpose-built, luxury SUV in the world. Tested to destruction all over the planet, Cullinan is an incredibly capable off-roader that sees the development of the ‘Magic Carpet Ride’ for off-road enjoyment, without sacrificing any Rolls-Royce on-road behaviour. Cullinan offers a suite of Bespoke features developed specifically for the many various lifestyles of its owners including the Viewing Suite and the Recreation Module. The 6.75 litre twin-turbo V12 Rolls-Royce engine delivers 563bhp/420kW and 850Nm/627lb ft of torque to the all-new all-wheel drive, all-wheel steer system needed to overcome any challenge. A century-long pedigree of adventurous quests and campaigns successfully carried out across all terrains thanks to the luxury offered by a stout vehicle that was swift, stealthy and dependable.  “A Rolls in the desert is above rubies” – T.E. Lawrence. Introduction
When Rolls-Royce announced three years ago that it would launch Cullinan, it did so in the knowledge that its customers around the world had asked it to build “The Rolls-Royce of SUVs”, with luxury, performance and usability not seen before in the SUV market. Many of these customers were younger, very successful high-net-worth individuals who are heavily engaged in the experience economy, and wanted a Rolls-Royce that would take them to the ends of the Earth in ultimate luxury.
Automotive mobility has always been a fast moving and dynamic business, with new concepts – such as SUVs – appearing with great regularity. But those new concepts need to be perfected in order to be adopted by those customers who will accept no compromise – the patrons of true luxury. Hence the Rolls-Royce Cullinan.
“History set our precedent, and today Rolls-Royce answers its call to action,” comments Müller-Ötvös. “Our answer to the visionaries, adventurers, explorers and those who believe in the supremacy of liberty is the Rolls-Royce Cullinan.”
What is Cullinan?
The Rolls-Royce Cullinan is Rolls-Royce as it’s never seen before. When Sir Henry Royce said, “Strive for perfection in everything you do. Take the best that exists and make it better. When it does not exist, design it”, he could have had Cullinan in mind.
“We knew we had to offer our clients what they couldn’t find in the SUV market,” continues Müller-Ötvös. “They do not accept limitations or compromises in their lives. They are the new pioneers, and for them it’s about their sense of adventure and daring in how they live their experiences. This approach to life demands a motor car that can go-anywhere in ultimate luxury and style – Rolls-Royce style. Hence Cullinan.”
It was clear that these new, younger and more adventurous customers wanted a Rolls-Royce that would take them completely off the beaten track and reward them with life’s most enriching experiences. What they didn’t want was a vehicle as ubiquitous as an SUV with compromises such as increased cabin noise due to the “two-box” formula; shared platforms that affect performance and comfort; the choice of being good either on-road or off-road; or a lower, more featureless SUV that blends in and becomes just another car.
“Cullinan is luxury in its purest form blended with perfect practicality and off-road capability,” comments Müller-Ötvös. “Effortless, Everywhere is not just the promise behind Cullinan. It’s the fact.”
Making luxury Effortless, Everywhere engendered an evolution in Rolls-Royce’s approach to creating an authentic Rolls-Royce SUV. The most obvious sign of this was the radical rear of Cullinan.
For the first time a Rolls-Royce has an opening tailgate, called ‘The Clasp’. In a nod to the era when luggage was mounted on the exterior of the motor-car, so the occupants did not travel with their belongings, the rear profile of Cullinan is a two-part, ‘D-Back’ format, with the bustle denoting the place of the luggage. ‘The Clasp’ opens and closes in its two sections automatically at the touch of the key fob button.
The rear passenger compartment of Cullinan has been designed to offer the best seat in the house for the owner’s particular needs. Two rear configurations are offered – Lounge Seats or Individual Seats.
The Lounge Seat configuration is the more functional of the two options. With space for three passengers in the rear, it will likely be more attractive to families. The rear seats also fold down – a first for Rolls-Royce.
The seats fold electronically in a number of configurations by pressing the appropriate button in the boot or rear door pocket. One press sees each backrest effortlessly fold down, whist at the same time moving the headrests upwards to avoid making an imprint on the seat cushion. Both seat backs can be folded completely, creating a flat load area or in a 2/3 and 1/3 split, increasing practicality even further. Rear passengers can still travel with a long load, or use the carpeted seat back as an occasional table on which to rest their precious personal items.
For those who intend to transport large items back from their adventures, the rear of Cullinan offers a large amount of space in different arrangements.
The rear compartment or boot area offers a standard 560 litres of space, growing to 600 with the parcel shelf removed. Furthermore, the base of the rear seats sits higher than the boot floor, so even with both rear seats folded, the items in the boot cannot slip forward and are safely contained, unlike in any other SUV. But for those wishing to carry a long item back from their trip – whether it be a Mark Rothko from the Art Gallery or a newly discovered artefact from the latest archaeological dig – a loading length of 2245mm and load capacity of 1930 litres is accessed by electronically raising the boot floor to meet the seat base, allowing the item to slide through effortlessly.
Rolls-Royce’s investment in making the rear of Cullinan effortlessly and ultimately practical has the side benefit of offering a loading length longer than a Range Rover Vogue Extended Wheelbase. A very practical Rolls-Royce indeed.
Knowing that the Rolls-Royce customer expects to bespoke his or her Cullinan, a second rear configuration is offered.
The Individual Seat configuration is for those who value the ultimate luxury an SUV can offer over practicality. The two individual rear seats are separated by a Fixed Rear Centre Console incorporating a drinks cabinet with Rolls-Royce whisky glasses and decanter, champagne flutes and refrigerator. The seats also move in a number of planes to offer ultimate comfort whilst travelling in the rear.
One final feature brings Rolls-Royce’s ultimate level of luxury to this configuration of Cullinan, creating the first truly “three-box” SUV. Inspired by the age when one never travelled with one’s luggage, a glass partition isolates the passenger cabin from the luggage compartment, creating an inner ecosystem for the occupants. In addition to enhanced and class-leading silence within the cabin, a further benefit becomes clear in the hottest and coldest of environments. Thanks to the sealed cabin created by the glass partition wall, the occupants can remain in the optimum temperature even when the luggage compartment stands open.
Adventure awaits
Cullinan awakes at the touch of the unlock button on the Bespoke key, or indeed by simply reaching out to its beautifully tactile stainless steel door handle. It lowers itself by 40mm to make entry effortless as the iconic Rolls-Royce coach doors stand open to welcome driver and passengers to their adventure.
Having stepped directly into the cabin, thanks to the wide aperture of the doors and completely flat floor, driver and passengers press the door closing button to seal themselves within the sanctuary of Cullinan’s cabin. Or one touch of the sensor on the exterior door handles will see the doors automatically close themselves from outside.
A touch of the start button then elevates Cullinan 40mm to its standard, commanding ride height, placing its occupants in the perfect position from which to see the world as it drives off.
The driver instantly recognises Cullinan as a driver’s car thanks to its thicker, smaller steering wheel. It’s heated, pliant rim hints at epic voyages which Cullinan is all too eager to begin, whilst heated and ventilated seats mean passengers will be perfectly acclimatised. From their commanding position at the helm of Cullinan, all equipment and technology is clearly seen and reached by the driver.
All information is clearly communicated by the latest generation of digital instruments, with the displays themselves designed with clear and beautiful virtual needles, Rolls-Royce jewellery-like chaplets and clear lettering.
The central information screen is for the first time touch sensitive, allowing the driver to quickly select functions, map views and vehicle set-up whilst on the trail. This portal can still be controlled from the iconic Spirit of Ecstasy controller which nestles on the central console with the ‘Off-Road’ button, Hill Descent Control button and Air Suspension height adjustment controls.
A host of other cutting-edge technology makes Rolls-Royce Cullinan the most technologically advanced car of its type in the world. Further equipment includes: Night Vision and Vision Assist including daytime and night-time Wildlife & Pedestrian warning; Alertness Assistant; a 4-Camera system with Panoramic View, all-round visibility and helicopter view; Active Cruise Control; Collision Warning; Cross-Traffic Warning, Lane Departure and Lane Change Warning; an industry leading 7x3 High-Resolution Head-Up Display, WiFi hotspot, and of course the latest Navigation and Entertainment Systems.
For those not behind the wheel, the world’s most spectacular scenery is to be seen from a privileged position. Those in the rear sit higher than those in the front of the car on Rolls-Royce’s Pavilion Seating, enjoying grandstand views of their surroundings thanks to the large glazed area of Cullinan’s side windows and industry-leading panoramic glass roof. And if they wish to locate themselves or their latest far-flung discovery, they can zero in on their location on the rear touchscreen map.
Also, no photographic opportunity will be missed as all electronic devices can be charged via the five USB ports around the cabin, whilst phones can be wirelessly charged in the front of the cabin.
Arriving at their remote destination, the occupants can descend without dirtying their trouser legs as both front and rear coach doors wrap low under the sill of Cullinan, ensuring that all dirt remains on the outside of the door. A feature only Rolls-Royce would have considered.
The ‘Magic Carpet Ride’ taken off-road
The integration of new technologies into the architecture was also key to ensuring the fundamental quality of Cullinan as Effortless, Everywhere. The engineering team began by creating a drivetrain that would bring Rolls-Royce’s famous ‘Magic Carpet Ride’ off-road.
“The drivetrain system we engineered for Cullinan had one key job to do,” explains Caroline Krismer, Engineering Project Leader for Cullinan. “To bring the famed Rolls-Royce ‘Magic Carpet Ride’ to all other terrains possible, while ensuring class-leading on-road behaviour in the SUV sector.”
Rolls-Royce’s celebrated Magic Carpet Ride impresses off-road as well as on-road thanks to the new lighter architecture, and the latest generation of self-levelling air suspension. Through a thorough re-engineering of the existing air suspension system – including adding larger air struts with more air volume to cushion the blows of the toughest of terrains – the strengthening of drive and prop shafts, the inclusion of drive to the front wheels as well as the back for the first time in Rolls-Royce history, and the complete reworking of the new 6.75 litre twin-turbo V12 Rolls-Royce engine to deliver just the right level of torque (850Nm) at the lowest possible revolutions (1,600rpm), the Rolls-Royce engineering team has ensured Cullinan will take owners to places no modern Rolls-Royce owner has travelled in luxury before.
The suspension makes millions of calculations every second as it continuously varies the electronically controlled shock absorber adjustment system – reacting to body and wheel acceleration, steering inputs and camera information. A new double-wishbone front axle and 5-link rear axle deliver astounding levels of control over lateral roll and shear forces and deliver incredible agility and stability, as does the addition of four-wheel steering, all contributing to incredible drivability and nimbleness.
In the case of driving off-road, the electronically controlled shock absorber adjustment system uses an air compression system to actively push down any wheel it detects losing traction to ensure every wheel is constantly in contact with the ground and maximum torque is being provided to all wheels.
“Put simply, what makes the car great on-road makes the car great off-road,” concludes Krismer.
The final piece of the puzzle of ensuring that the Rolls-Royce Cullinan is Effortless, Everywhere is one single button. Known within Rolls-Royce as the ‘Everywhere’ button, one single push is all it takes to harness all the aforementioned peerless Rolls-Royce engineering and unleash all of Cullinan’s off-road capability.
Once engaged, the driver can finesse the off-road setting to glide over any situation, whether it be rough track, gravel, wet grass, mud, snow or sand delivering all 850Nm of torque to all four wheels without interruption. And faced with deep snow, sand or the need to ford streams, Cullinan delivers the deepest wading depth of any super-luxury SUV at 540mm thanks to its highest ride height.
One life, many lifestyles
Driving to your remote location is simply the first part of the adventure in a Rolls-Royce Cullinan. Further enjoyment awaits in the shape of a Rolls-Royce Recreation Module.
Imagine the scene. Having chosen your adventure you call down to your garage. “Jason, we’re going to go drone racing today. Can you load the Drone Module into the Cullinan?” Downstairs, Jason selects the Drone Racing Module from the rack containing several other Recreation Modules that the owner has had commissioned from Rolls-Royce to satisfy his or her preferred recreational pursuits.
Fly fishing, photography, rock climbing, snowboarding, parascending, kite boarding, base jumping, volcano boarding or simply sitting and taking in the view, anything is possible thanks to the Rolls-Royce Bespoke Collective. Easily slotted and plugged into the boot of Cullinan, each Recreation Module contains a motorised drawer housing the equipment and paraphernalia specific to each Cullinan owner’s pursuits. When the owner is ready to play, it presents itself.
  • Rolls-Royce enters the SUV arena

A fire at a supplier's plant last week is causing some headaches for Ford. The company has halted production of the F-150 at Kansas City Assembly Plant, and F-Series Super Duty at Kentucky Truck and Ohio Assembly due to a parts shortage. F-150 production at Ford's Dearborn plant is expected to be idled either today or tomorrow.
The supplier, Meridian Lightweight Technologies makes instrument panel components for the F-Series trucks. Last Wednesday, the company's factory in Eaton Rapids, Michigan caught fire. The cause is still being investigated, but the Lansing State Journal reports the fire started in an area known as the "tunnel," a place where workers put magnesium scraps on a conveyor belt to be melted down. The fire caused a number of explosions to take place in the factory. Two people were injured and 150 workers were evacuated.
The situation at the moment is ok according to Ford and analysts if the shutdown only lasts a week. There is an 84-day supply of trucks and Ford is working with Meridan to figure out the “next steps.” But as AutoPacific analyst Dave Sullivan points out, this could cause some serious problems for Ford if it lasts more than a week.
"They should be able to weather a short-term shutdown. But if this goes longer than a week, it could really hurt second-quarter performance," Sullivan tells the Free Press.
Ford isn't the only automaker that is being affected by this.
General Motors has halted production of the Chevrolet Express and GMC Savana at their Wentizville assembly plant in Missouri. FCA told Automotive News that the fire has affected the output of the Chrysler Pacifica, built at their Windsor, Ontario plant. They are "adjusting production schedules as needed to minimize plant downtime (and) will make up any lost production." Mercedes-Benz in a statement said, "we have cancelled production shifts in certain areas and adjusted production hours for our team members this week," at their Vance, Alabama plant - home to C-Class, GLE-Class, GLE-Coupe, and GLS-Class production. BMW told Automotive News that production of the X5 at their South Carolina plant will be affected somewhat, but their current supply of parts should keep them running for the time being. Source: Automotive News (Subscription Required), Detroit Free Press, Lansing State Journal
  • They're not the only ones affected by this, but they have the most to possibly lose

BMW is making the M5 just a slightly bit more aggressive with the debut of the M5 Competition. Following in the footsteps of the M2 Competition, the M5 version tweaks the powertrain, chassis, and exterior.
Beginning under the hood, the twin-turbo 4.4L V8 sees a slight boost in horsepower from 600 to 617. Torque remains at 553 pound-feet, although BMW has broadened the peak torque range. 0-60 mph sees a slight improvement of 0.3 seconds - 3.1 vs. 3.4.
For the chassis, BMW has added stiffer engine mounts, M-specific Variable Damper Control system, revised mounting points for the front anti-roll bar, lowered ride height, and a stiffer rear anti-roll bar.
To have the Competition stand out from other M5s, BMW has blacked out a number trim pieces, along with the door handles and fender vents. A set of forged 20-inch alloy wheels are standard.
Pricing for the M5 Competition begins at $110,995, which includes a $995 destination charge. That's about $7,000 more than the standard M5. Production begins in July.
Source: BMW

 

The All-New 2019 BMW M5 Competition Sedan.
Model specific tuned suspension and engine mounts. TwinPower Turbo engine offers 617 hp and 553 lb-ft of torque. 189 mph top speed with optional M Driver’s Package. New standalone Competition model segment within the M brand. MSRP of $110,995 including destination. Production beginning July 2018. Woodcliff Lake, NJ – May 8, 2018 …Today, BMW M GmbH unveiled the most powerful BMW M5 sedan ever. The new 2019 BMW M5 Competition Sedan raises the bar for performance, agility and precision within its class. With engine output increased to 617 hp, sharper responses and enhanced chassis tuning, the M5 Competition Sedan delivers a driving experience with motorsport undertones. The new 2019 BMW M5 Competition Sedan succeeds in blending performance, a superbly exclusive aura and an unruffled ease in everyday use.
A history of success: Competition, the ultimate in M performance.
The launch of the new 2019 BMW M5 Competition Sedan, along with the recently announced M2 Competition Coupe, marks the creation of a new product category within BMW M GmbH’s line-up, with the most powerful variants of its high-performance cars to be available in the future as standalone Competition models. This restructuring of the M portfolio has been prompted by the strong popularity of the various model-specific M Competition packages. M Competition packages were first offered for the predecessor to the current BMW M5 and are currently available for the BMW M4 Coupe, BMW M4 Convertible and BMW M3 Sedan. Some 40 percent of all previous-generation BMW M5 models sold worldwide were equipped with the M Competition package. The line-up’s crowning glory came in the form of the BMW M5 Competition Edition, which was capped at just 200 units and boasted a power output of 600 hp along with an ultra-exclusive standard specification.
Exclusive design features.
Light-alloy wheels specially developed for the new 2019 BMW M5 Competition Sedan play a part in its exceptional performance capabilities and add to the model’s exclusive looks. Other distinctive design features of the Competition include high-gloss black finishers on the door handles, mirror bases and mirror triangles, plus the exterior mirror caps and the mesh of the signature M gills in the front flanks. High-gloss Shadow Line trim is featured on the door window surrounds and B-pillar trim.
The kidney grille’s surrounds feature high-gloss black accenting as does the detailing for the rear bumper cover. This forms a color-coordinated composition with the tailpipes in black chrome. Both the rear spoiler and “M5” boot lid logo – which gains “Competition” lettering – are also finished in high-gloss black.
Moving inside the new 2019 BMW M5 Competition, black seat belts with a striped pattern in BMW M GmbH colors and floor mats with model-specific piping plus an “M5” logo provide the finishing touches. A distinctive “M Competition” graphic appears in the instrument cluster to greet the driver as vehicle is starting up.
Engine: more power and performance.
The emotion-packed driving experience that defines the new BMW M5 Competition stems from the unique performance characteristics of its engine. The high-revving power unit with M TwinPower Turbo technology developed for the standard BMW M5 has undergone meticulous retuning to optimise torque and power delivery.
The 4.4-liter V8 now generates 617 hp at 6,000 rpm. Peak torque stands at 553 lb-ft. between 1,800 and 5,860 rpm (a 160-rpm wider band than in the standard version of the new BMW M5). This means the linear power delivery for which M models have become synonymous for is sustained for even longer – into a rev band where the engine’s maximum output comes into play. The modified power delivery results in a faster 0 to 60 mph acceleration time of just 3.1 seconds, while the 124 mph mark is reached from a standing start in 10.8 seconds – 0.3 seconds quicker than in the standard version of the new BMW M5.
M Sport exhaust system develops an unmistakable sound.
The BMW M5’s 4.4L V8 engine’s technological wizardry includes a cross-bank exhaust manifold. Here, precisely directed exhaust gas flows ensure exceptionally quick turbocharger response along with an optimized gas-exchange cycle.
The new 2019 BMW M5 Competition comes with a model-specific M Sport exhaust system. This version of the flap-controlled, twin-pipe exhaust system produces an extremely distinctive sound with a sportier tone – especially when the engine is pushed hard and at high revs. The various engine modes, which can be selected at the push of a button, include changes to the sound emitted by the exhaust system. The acoustic profile activated by Sport Plus mode, for example, is even more purposeful in nature. The driver can vary the engine’s aural character using the M Sound Control button, enabling a quick switch to a far more understated sound. The M Sport exhaust system makes a great visual impression too, thanks to the black chrome embellishers of the tailpipe pairs nestled neatly into the left and right of the rear apron.
Specially designed engine mounts optimize responsiveness and cornering characteristics.
The new 2019 BMW M5 Competition features model-specific engine mounts, which have a noticeable impact on its performance abilities. The engine mounts have modified characteristics and feature an increased spring rate – from the 3,312 lbs/in. of the standard-spec new BMW M5 to 5,139 lbs/in. The drive unit’s firmer connection to the vehicle’s structure results in a more direct engine response resulting in a more immediate transfer of power to the drivetrain. The car turns into corners with noticeably greater directness and precision due to the mountings’ stiffer characteristics.
Power transfer via eight-speed M Steptronic transmission and M xDrive.
The task of transferring the new 2019 BMW M5 Competition’s engine power to the wheels is handled by the eight-speed M Steptronic transmission, whose design and functionality have been carefully designed for extreme performance. Incredibly short shift times and swift, precise responses to every nudge of the accelerator ensure that the engine’s capabilities are instantly translated into action. Three different modes offering a choice of efficient, sporty or ultra-high performance driving can be activated using the Drivelogic rocker switch on the gear selector. Manual gear selections are possible with either the selector lever or the shift paddles on the steering wheel. A specially designed transmission oil cooler keeps the transmission operating within the desired temperature range, even when the car is being pushed to the limit on the track.
The M xDrive system, which made its debut in the standard version of the new 2019 BMW M5, already has all the required tools to deliver scintillating performance. The intelligent all-wheel-drive technology is capable of effortlessly directing the BMW M5 Competition’s greater power to the road in and generating just enough extra traction to achieve acceleration times worthy of a super-sports car. The centrally controlled interaction between M xDrive and the Active M Differential is largely responsible for channelling the engine’s remarkable output to the car’s wheels without any loss of power en route. The engine’s torque is distributed between the front and rear wheels by the transfer case’s fully variable, electronically controlled multi-plate clutch, before the Active M Differential splits it again as needed between the two rear wheels.
The rear-wheel bias of the M xDrive system contributes to the tremendous agility of the high-performance sedan. The system makes it possible to program in an individual power distribution configuration, and the driver is able to influence both the way the DSC (Dynamic Stability Control) works and how drive torque is distributed between the front and rear axles – all at the press of a button. As an alternative to the basic setting, the new BMW M5 and M5 Competition both offer a choice of M Dynamic mode offering greater slip angles and particularly fun handling, as well as three additional modes with DSC deactivated that are geared towards track driving. Besides the 4WD and 4WD Sport modes, there is the option of pure rear-wheel drive (2WD), which allows experienced and skilled drivers to revel in the experience offered by past generations of the BMW M5 – i.e. handling in its purest form, with no control system intervention.
Model Specific chassis tuning for the ultimate precision and performance.
Like every BMW M car, the new 2019 BMW M5 Competition is equipped with chassis technology matched to the performance characteristics of its engine. The modifications ensure precisely controllable handling at all times, even in extremely dynamic driving situations. This is down to the M-specific kinematic and elastokinematic properties of the high-performance sedan’s double-wishbone front suspension and five-link rear suspension. They result in neutral steering behaviour and a linear build-up of lateral force up to the car’s dynamic limits. An M-specific version of the Variable Damper Control system is fitted, the Comfort, Sport and Sport Plus modes selectable at the press of a button activating different damper settings. The electromechanical M Servotronic steering conveys a sense of supreme accuracy on turn-in, while delivering clear feedback to the driver.
The 2019 M5 Competition ride height has been lowered by seven millimetres compared to the M5 Sedan, with additional, model-specific chassis tuning, featuring tweaks to the springs and dampers. Increased negative camber at the front axle enhances the car’s ability to absorb lateral forces through high-speed corners. Fitting the toe links with ball joints instead of rubber mounts has resulted in more precise wheel guidance at the rear axle. The spring rate of the rear anti-roll bar is firmer, causing the body roll that occurs through high-speed corners to be distributed with a pronounced rear bias.
The front axle of the new 2019 BMW M5 Competition is equipped with a redesigned mounting for the anti-roll bar. Making the springs at the front and rear axles ten per cent stiffer than the standard version of the new BMW M5 produces a firmer ride and has a positive impact on steering response. Shorter auxiliary springs reduce fluctuation in wheel loads, as does the unique tuning for the damper hydraulics. The athletic character of the new 2019 BMW M5 Competition really comes out with the three modes selectable at the touch of a button. This means the direct connection of chassis to driveline can also be clearly felt in Comfort mode. Selecting Sport mode activates the damper settings perfected for harsher tarmac and curbing of a track like Nürburgring’s Nordschleife circuit. Sport Plus lends itself to the smoother pavement and curbing of grand prix circuits.
The ultimate in braking and grip.
The outstanding stopping power of the new 2019 BMW M5 Competition is provided by low-weight M compound brakes, featuring six-piston fixed callipers and perforated, inner-vented brake discs at the front wheels and single-piston floating callipers with integrated parking brake at the rear. The optional M carbon-ceramic brakes, distinguished by their even lower weight, offer greater extreme thermal stability and excellent resistance to wear.
Standard specification for the new 2019 BMW M5 Competition includes exclusive M light-alloy wheels sporting a Y-spoke design in a bi-colour finish. The 20-inch forged wheels are shod with tires measuring 275/35 R 20 at the front and 285/35 R 20 at the rear.
 
Specifications
2019 BMW M5 Competition Sedan
Seats -- 5 Number of Doors -- 4 Drive type -- AWD Length inches 195.5 Width inches 74.9 Height inches 57.8 Width including mirrors inches 83.7 Wheelbase inches 117.4 Ground clearance inches 5 Turning radius ft 20.7 Shoulder width front inches 58.7 Shoulder room rear inches 55.9 Legroom front inches 41.4 Legroom rear inches 36.5 Headroom front inches 40.7 Headroom rear inches 38.5 Trunk volume (SAE) ft³ 18.7 Fuel Tank capacity gallons 20.1 Curb weight lbs 4,370 Weight distribution Front / Rear % 54.7 / 45.3 Gross vehicle weight lbs 5,380 Payload lbs 925 Engine type -- S63 Cylinders -- 8 Valves per cylinder -- 4 Stroke mm 88.3 Bore mm 89 Displacement cm³ 4,395 Compression rate :1 10 Engine power hp 617 at rpm 1/min 6,000 Engine torque ft lbs 553 at rpm 1/min 1,800-5,860 Fuel type -- gasoline Recommended Fuel -- AKI 93 Engine oil capacity quarts 10.6 Output per liter hp/liter 140.4 Transmission type -- M8HP75 Transmission type -- automatic transmission Gear ratios 1st gear -- 5 2nd -- 3.2 3rd -- 2.14 4th -- 1.72 5th -- 1.31 6th -- 1 7th -- 0.82 8th -- 0.64 Reverse gear -- -3.48 Final drive ratio -- 3.15 Power-steering type -- EPS Steering ratio :1 14.3 Front tires -- 275/35 ZR20 102Y XL Front wheels inches 9.5J x 20 Rear tires -- 285/35 ZR20 104Y XL Rear wheels inches 10.5J x 20 Track front inches 64 Rear track inches 62.8 Cx -- 0.31 0-60 mph seconds 3.1 Top speed mph 155 Top speed with M Drivers Package mph 189
  • For just slightly more money

Back in December, we reported that the Cadillac ATS sedan would be no more for the 2019 model year via a General Motors VIN Decoder document. Only the coupe would stick around. Cadillac declined to comment at the time.
Yesterday, new evidence to the sedan's departure came to light via GM's fleet order guide.
The Truth About Cars tried to get a comment from Cadillac about this new information, but wasn't able to. That changed this morning.
“This year will bring forth significant changes to our product portfolio, most notably with the introduction of the all-new XT4 SUV as well as concluding the successful lifecycle of the ATS Sedan in North America. The ATS Coupe, which is on a later lifecycle, will continue into 2019,” wrote Cadillac spokesman Donny Nordlicht in an email to The Truth About Cars.
The ending of ATS sedan production is to allow GM to start the retooling process at Lansing Grand River Assembly plant for the "next generation of Cadillac sedans”. We're assuming this means the upcoming CT5 - replacement for ATS, CTS, and XTS - will be built here.
Source: The Truth About Cars, 2
  • We can finally end the suspense

For the 2018 Model Year, Chevy gave the Tahoe an RST package for some extra sporting pizzazz and more recently introduced the RST Performance package on the Suburban.  The RST removed chrome, blacked out grilles, and added custom wheels.  Upgrading to the performance package brought on the 6.2 liter V8, 10-Speed automatic transmission, and GM's Magnetic Ride Control.  At GMC, the only way to get those performance upgrades was to first check the box on the order form that said "Denali".
One of our intrepid readers lurking around the GM Fleet Order Guide (Hat-tip: @ocnblu) found that GMC is planning to offer a virtually identical set of packages on the Yukon for 2019. Named Graphite and Graphite Performance Package, these packages should add a bit bolder look to the otherwise conservative Yukon.
Like the Tahoe/Suburban RST, the GMC Yukon Graphite Edition removes most, if not all, of the bright chrome accents typically found on a Yukon. In their place are a black chrome mesh grille insert, black chrome fog lamp surround, body color grille surround, gloss black belt line moldings, and the Z85 Suspension package with air leveling. Special, package specific 22" bright machined wheels with Carbon Flash Metallic pockets and gloss black side assist steps are added. 
The Graphite Performance Edition adds to that with the 6.2 liter V8, 10-speed automatic, 3.23 rear axle, Magnetic Ride Control, upgraded 8" driver information center, heads up display, 8" infotainment system with navigation, trailer brake controller, upgraded alternator, unique performance edition 22" 6-spoke wheels, and on four-wheel drive models a 2-speed active transfer case.  Not mentioned in the GMC order guide is the sport suspension calibration mentioned in the Tahoe RST guide, but that could simply be an order guide oversight. 
Both Graphite Editions will come wearing P285/45R22 tires and will only be available for selection on SLT equipped Yukons. The Yukon Graphite will be available in only three colors - White Frost Tricoat, Onyx Black, or Dark Sky Metallic.
No official picture or release of the 2019 GMC Yukon Graphite Edition has been made by GMC yet, but expect something in the coming weeks.
(2016 GMC Yukon SLT Pictured)
 
  • A more sport oriented Yukon for 2019

In 2009, the U.S. saw its lowest number of pedestrian deaths. But since then, that number has increased by 46 percent as pedestrian crashes have become more frequent and deadlier. Why is that?
The Insurance Institute for Highway Safety released a study today investigating the possible reasons. One key indicator is the number of crashes involving SUVs. According to IIHS data, between 2009 and 2016, fatal single-vehicle crashes involving SUVs rose 81 percent - the largest increase of any vehicle segment. Aside from the growing popularity of SUVs and crossovers, the tall body height and larger footprint mean in a pedestrian crash, the vehicle is hitting a person's chest or head.
SUVs weren't the only metric to see an increase. IIHS reports that urban environments, arterial roads, nighttime, and non-intersection crashes have seen large increases.
Can anything be done to help reduce pedestrian fatalities? According to the IIHS, there is a lot that can be done.
Softening the front ends of SUVs Improving pedestrian detection systems and headlights (The latter would be helped if NHTSA can get its act together on updating their headlight regulations) Lower the speed limits Adding more "pedestrian hybrid beacons" - Kind of a sudo-stop light where a pedestrian activates it before crossing. Begins flashing yellow, before transitioning to solid yellow, and then solid double red. "Understanding where, when and how these additional pedestrian crashes are happening can point the way to solutions. This analysis tells us that improvements in road design, vehicle design and lighting and speed limit enforcement all have a role to play in addressing the issue," said IIHS President David Harkey.
Source: Insurance Institute for Highway Safety
 
  • Highest amount since 2009

Yesterday, we reported that Volkswagen CEO Herbert Diess got a safe-passage deal from the U.S. Justice Department. This type of deal is very unusual and it was speculated that U.S. wasn't planning to charge Diess over the diesel emission scandal, or that he provided some sort of testimony. We might have an answer to how Diess got this deal.
German tabloid Bild reports that Diess traveled to the U.S. last week to testify about the diesel emission scandal. Representatives from the FBI and Justice Department were present, as was Larry Thompson, the U.S. monitor appointed last year to oversee reforms at the company. Unfortunately, Bild doesn't mention any sources.
Reuters did some investigating and got conflicting stories. One source told the news service that Diess and Thompson recently traveled to the U.S. recently with "relevant authorities", without going into further detail. Another source denied that a meeting took place last week, saying Diess met with spoke with authorities a few months ago.
Volkswagen declined to comment.
Our guess is that Diess was given a safe-passage deal from the U.S. Justice Department if he would provide testimony on the diesel emission scandal. We'll keep you posted if anything breaks on this story.
Source: Bild (Subscription Required), Reuters
  • That might explain how he got the safe-passage deal

Nissan is joining Toyota in gradually ending the sale of diesel vehicles in Europe.
“Along with other manufacturers and industry bodies we can see the progressive decline of diesel but we do not anticipate its sudden end in the short-term. At this point in time and for many customers, modern diesel engines will remain in demand and continue to be available within Nissan’s powertrain offering,” a Nissan spokeswoman told Reuters.
“In Europe, where our diesel sales are concentrated, our electrification push will allow us to discontinue diesel gradually from passenger cars at the time of each vehicle renewal.”
 
Sales of diesel vehicles have been on a sharp decline for the past year due in part to rising taxes and possible bans looming. Analysts believe this trend will continue in 2018.
Last month, a source revealed to Reuters that Nissan is planning to lay off hundreds of workers at its Sunderland plant due to falling diesel vehicle sales.
Source: Reuters
  • Nissan joins Toyota in this trend

We all know someone who takes things a bit a too far. In the case of automakers, that someone is EPA Administrator Scott Pruitt. Back in April April, Pruitt announced a serious rollback of fuel economy regulations that were set in stone during the Obama administration. In a summary of the proposed draft, the EPA would rollback the fleetwide average from 46.8 mpg for the 2026 model year to around 37 mpg - the fleetwide average for the 2020 model year. The draft also mentions pre-empting "California's authority" on setting their own emission standards under the 1975 Energy Policy and Conservation Act. This move has caused California and a collation of other states to file suit over the proposed changes.
According to Automotive News, the changes proposed by Pruitt go a bit too far for automakers. All they wanted was the emission targets for the 2022-2025 model years to "ratchet up more gradually and offer more compliance flexibility." Now, they have to worry about litigation and uncertainty.
"I don't think anybody in industry, when asked for reopening of standards, asked to level out to zero," said an unnamed lobbyist for a major automaker.
However, certain groups argue that automakers should have expected something far-reaching under this current administration.
"You've got to know your audience. If you go to [EPA Administrator] Scott Pruitt and Donald Trump and say you want relief from the rules and they are going to cost jobs, this is what you end up with," said Andrew Linhardt, deputy director of the Sierra Club's clean energy campaign.
Later this week, executives from the major automakers will be meeting with officials at the White House to see if they can get the federal government and California to agree to some sort of comprise.
Source: Automotive News (Subscription Required)
  • This isn't what we exactly wanted. -Automakers